{"tests":[{"name":"cl.filesystem/deadlinks","result":"PASS","duration":1080641158,"output":""},{"name":"cl.filesystem/suid","result":"PASS","duration":171798209,"output":""},{"name":"cl.filesystem/sgid","result":"PASS","duration":146054217,"output":""},{"name":"cl.filesystem/writablefiles","result":"PASS","duration":151499985,"output":""},{"name":"cl.filesystem/writabledirs","result":"PASS","duration":140261629,"output":""},{"name":"cl.filesystem/stickydirs","result":"PASS","duration":142472895,"output":""},{"name":"cl.filesystem/blacklist","result":"PASS","duration":163679612,"output":""},{"name":"cl.filesystem","result":"PASS","duration":24246943320,"output":" --- PASS: cl.filesystem/deadlinks (1.08s)\n --- PASS: cl.filesystem/suid (0.17s)\n --- PASS: cl.filesystem/sgid (0.15s)\n --- PASS: cl.filesystem/writablefiles (0.15s)\n --- PASS: cl.filesystem/writabledirs (0.14s)\n --- PASS: cl.filesystem/stickydirs (0.14s)\n --- PASS: cl.filesystem/blacklist (0.16s)\n"},{"name":"coreos.selinux.enforce","result":"PASS","duration":49196193076,"output":""},{"name":"coreos.ignition.groups","result":"PASS","duration":24897770439,"output":""},{"name":"cl.disk.raid1.root","result":"PASS","duration":51240633863,"output":""},{"name":"coreos.ignition.resource.local","result":"PASS","duration":49419284107,"output":""},{"name":"cl.network.nftables","result":"PASS","duration":22940458253,"output":" cluster.go:152: + sudo nft --json list ruleset | jq '.nftables[] | select(.rule) | .rule.expr[0].match.right'\n"},{"name":"cl.tpm.nonroot","result":"PASS","duration":92335616777,"output":""},{"name":"cl.ignition.v2_1.vfat","result":"PASS","duration":36406035194,"output":""},{"name":"cl.ignition.luks","result":"PASS","duration":39020862119,"output":""},{"name":"coreos.tls.fetch-urls","result":"PASS","duration":26592918975,"output":""},{"name":"kubeadm.v1.33.8.cilium.base/node_readiness","result":"PASS","duration":22229170802,"output":""},{"name":"cl.ignition.v1.ext4root","result":"PASS","duration":30557713394,"output":""},{"name":"kubeadm.v1.33.8.cilium.base/nginx_deployment","result":"PASS","duration":12339210726,"output":""},{"name":"kubeadm.v1.33.8.cilium.base/NFS_deployment","result":"PASS","duration":20696569213,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"systemd.sysusers.gshadow","result":"PASS","duration":40634611387,"output":""},{"name":"kubeadm.v1.33.8.cilium.base/IPSec_encryption","result":"PASS","duration":23861944079,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.33.8.cilium.base","result":"PASS","duration":201110488117,"output":" cluster.go:125: I0421 11:15:18.256219 2058 version.go:261] remote version is much newer: v1.35.4; falling back to: stable-1.33\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0\n cluster.go:125: I0421 11:15:27.042248 2279 version.go:261] remote version is much newer: v1.35.4; falling back to: stable-1.33\n cluster.go:125: [init] Using Kubernetes version: v1.33.11\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.13]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 502.40204ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.13:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.009716784s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.566774777s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.00409467s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: trpvmo.piikpcj1asy3100r\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.13:6443 --token trpvmo.piikpcj1asy3100r \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:dd21b52dcb1b3d31d9ba3a7cd7bf8bdeda7725b613c904ccf32638e80b0c998a \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: Deployment cilium-operator \n cluster.go:125: DaemonSet cilium \n cluster.go:125: Containers: cilium-operator \n cluster.go:125: cilium \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W0421 11:16:02.760992 1834 joinconfiguration.go:113] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.33.8.cilium.base/node_readiness (22.23s)\n --- PASS: kubeadm.v1.33.8.cilium.base/nginx_deployment (12.34s)\n --- PASS: kubeadm.v1.33.8.cilium.base/NFS_deployment (20.70s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.33.8.cilium.base/IPSec_encryption (23.86s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"coreos.locksmith.reboot","result":"PASS","duration":350219528890,"output":""},{"name":"cl.swap_activation","result":"PASS","duration":24505971232,"output":""},{"name":"cl.ignition.instantiated.enable-unit","result":"PASS","duration":22750747196,"output":""},{"name":"cl.network.initramfs.second-boot","result":"PASS","duration":49734103652,"output":""},{"name":"sysext.custom-oem","result":"PASS","duration":74513319814,"output":" cluster.go:125: + set -euo pipefail\n cluster.go:125: + source /home/core/download-library.sh\n cluster.go:125: + download_dev_container_image flatcar_developer_container.bin\n cluster.go:125: + local output_bin=flatcar_developer_container.bin\n cluster.go:125: + shift\n cluster.go:125: + local arch version image_url bzip2cat\n cluster.go:125: ++ source /usr/share/flatcar/release\n cluster.go:125: +++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: +++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: ++ echo amd64\n cluster.go:125: + arch=amd64\n cluster.go:125: ++ source /usr/share/flatcar/release\n cluster.go:125: +++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: +++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: ++ echo 9999.0.0+more-sdk-fixes-2\n cluster.go:125: + version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ process_template http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2 amd64 9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ local template=http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ shift\n cluster.go:125: ++ local arch=amd64\n cluster.go:125: ++ shift\n cluster.go:125: ++ local version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ shift\n cluster.go:125: ++ local result=http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/images/amd64/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ echo http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + image_url=http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + echo 'Fetching developer container from http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2'\n cluster.go:125: + curl --fail --silent --show-error --location --retry-delay 1 --retry 60 --retry-connrefused --retry-max-time 60 --connect-timeout 20 --remote-name http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + bzip2cat=bzcat\n cluster.go:125: + command -v lbzcat\n cluster.go:125: + bzip2cat=lbzcat\n cluster.go:125: + cp --sparse=always /dev/fd/63 flatcar_developer_container.bin\n cluster.go:125: ++ lbzcat flatcar_developer_container.bin.bz2\n cluster.go:125: + workdir=/home/core/dev-container-workdir-14826\n cluster.go:125: + mkdir -p /home/core/dev-container-workdir-14826\n cluster.go:125: + sudo systemd-nspawn --console=pipe --bind-ro=/home/core/dev-container-script.sh --bind=/home/core/dev-container-workdir-14826:/work --image=flatcar_developer_container.bin --machine=flatcar-developer-container /bin/bash /home/core/dev-container-script.sh\n cluster.go:125: + set -euo pipefail\n cluster.go:125: ++ source /etc/os-release\n cluster.go:125: +++ NAME='Flatcar Container Linux by Kinvolk'\n cluster.go:125: +++ ID=flatcar\n cluster.go:125: +++ ID_LIKE=coreos\n cluster.go:125: +++ VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ VERSION_ID=9999.0.0\n cluster.go:125: +++ BUILD_ID=more-sdk-fixes-2\n cluster.go:125: +++ SYSEXT_LEVEL=1.0\n cluster.go:125: +++ PRETTY_NAME='Flatcar Container Linux by Kinvolk 9999.0.0+more-sdk-fixes-2'\n cluster.go:125: +++ ANSI_COLOR='38;5;75'\n cluster.go:125: +++ HOME_URL=https://flatcar.org\n cluster.go:125: +++ BUG_REPORT_URL=https://issues.flatcar.org\n cluster.go:125: +++ SUPPORT_URL='https://groups.google.com/forum/#!forum/flatcar-linux-user'\n cluster.go:125: +++ FLATCAR_BOARD=amd64-usr\n cluster.go:125: +++ CPE_NAME='cpe:2.3:o:flatcar-linux:flatcar_linux:9999.0.0+more-sdk-fixes-2:*:*:*:*:*:*:*'\n cluster.go:125: ++ echo 9999.0.0+more-sdk-fixes-2\n cluster.go:125: + version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ source /etc/os-release\n cluster.go:125: +++ NAME='Flatcar Container Linux by Kinvolk'\n cluster.go:125: +++ ID=flatcar\n cluster.go:125: +++ ID_LIKE=coreos\n cluster.go:125: +++ VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ VERSION_ID=9999.0.0\n cluster.go:125: +++ BUILD_ID=more-sdk-fixes-2\n cluster.go:125: +++ SYSEXT_LEVEL=1.0\n cluster.go:125: +++ PRETTY_NAME='Flatcar Container Linux by Kinvolk 9999.0.0+more-sdk-fixes-2'\n cluster.go:125: +++ ANSI_COLOR='38;5;75'\n cluster.go:125: +++ HOME_URL=https://flatcar.org\n cluster.go:125: +++ BUG_REPORT_URL=https://issues.flatcar.org\n cluster.go:125: +++ SUPPORT_URL='https://groups.google.com/forum/#!forum/flatcar-linux-user'\n cluster.go:125: +++ FLATCAR_BOARD=amd64-usr\n cluster.go:125: +++ CPE_NAME='cpe:2.3:o:flatcar-linux:flatcar_linux:9999.0.0+more-sdk-fixes-2:*:*:*:*:*:*:*'\n cluster.go:125: ++ echo 9999.0.0\n cluster.go:125: + version_id=9999.0.0\n cluster.go:125: ++ source /usr/share/flatcar/release\n cluster.go:125: +++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: +++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: ++ echo amd64-usr\n cluster.go:125: + board=amd64-usr\n cluster.go:125: + mkdir -p /work/sysext_rootfs/usr/share/flatcar-sysext-kola-test\n cluster.go:125: + echo 9999.0.0\n cluster.go:125: + mkdir -p /work/sysext_rootfs/usr/lib/extension-release.d\n cluster.go:125: + sysext_arch=x86-64\n cluster.go:125: + [[ amd64-usr = arm64\\-usr ]]\n cluster.go:125: + metadata=('ID=flatcar' \"VERSION_ID=${version_id}\" \"ARCHITECTURE=${sysext_arch}\")\n cluster.go:125: + metadata_file=/work/sysext_rootfs/usr/lib/extension-release.d/extension-release.oem-test\n cluster.go:125: + printf '%s\\n' ID=flatcar VERSION_ID=9999.0.0 ARCHITECTURE=x86-64\n cluster.go:125: + mksquashfs /work/sysext_rootfs /work/oem-test-9999.0.0+more-sdk-fixes-2.raw -all-root\n cluster.go:125: ++ source /etc/os-release\n cluster.go:125: +++ NAME='Flatcar Container Linux by Kinvolk'\n cluster.go:125: +++ ID=flatcar\n cluster.go:125: +++ ID_LIKE=coreos\n cluster.go:125: +++ VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ VERSION_ID=9999.0.0\n cluster.go:125: +++ BUILD_ID=more-sdk-fixes-2\n cluster.go:125: +++ SYSEXT_LEVEL=1.0\n cluster.go:125: +++ PRETTY_NAME='Flatcar Container Linux by Kinvolk 9999.0.0+more-sdk-fixes-2'\n cluster.go:125: +++ ANSI_COLOR='38;5;75'\n cluster.go:125: +++ HOME_URL=https://flatcar.org\n cluster.go:125: +++ BUG_REPORT_URL=https://issues.flatcar.org\n cluster.go:125: +++ SUPPORT_URL='https://groups.google.com/forum/#!forum/flatcar-linux-user'\n cluster.go:125: +++ FLATCAR_BOARD=amd64-usr\n cluster.go:125: +++ CPE_NAME='cpe:2.3:o:flatcar-linux:flatcar_linux:9999.0.0+more-sdk-fixes-2:*:*:*:*:*:*:*'\n cluster.go:125: ++ echo 9999.0.0+more-sdk-fixes-2\n cluster.go:125: + version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: + sysext_file=/home/core/dev-container-workdir-14826/oem-test-9999.0.0+more-sdk-fixes-2.raw\n cluster.go:125: + [[ ! -e /home/core/dev-container-workdir-14826/oem-test-9999.0.0+more-sdk-fixes-2.raw ]]\n cluster.go:125: + [[ ! -e /oem/oem-release ]]\n cluster.go:125: + printf '%s\\n' ID=test VERSION_ID=1.0.0 'NAME=testing stuff'\n cluster.go:125: + sudo tee /oem/oem-release\n cluster.go:125: + sudo mkdir -p /oem/sysext\n cluster.go:125: + sudo mv /home/core/dev-container-workdir-14826/oem-test-9999.0.0+more-sdk-fixes-2.raw /oem/sysext\n cluster.go:125: + sudo touch /oem/sysext/active-oem-test\n cluster.go:125: + sudo flatcar-reset --keep-machine-id --keep-paths /var/log\n cluster.go:125: + set -euo pipefail\n cluster.go:125: ++ systemd-sysext list --json=pretty\n cluster.go:125: + list_out=$'[\\n\\t{\\n\\t\\t\"name\" : \"containerd-flatcar\",\\n\\t\\t\"type\" : \"raw\",\\n\\t\\t\"path\" : \"/usr/share/flatcar/sysext/containerd-flatcar.raw\",\\n\\t\\t\"time\" : 1776726138244825\\n\\t},\\n\\t{\\n\\t\\t\"name\" : \"docker-flatcar\",\\n\\t\\t\"type\" : \"raw\",\\n\\t\\t\"path\" : \"/usr/share/flatcar/sysext/docker-flatcar.raw\",\\n\\t\\t\"time\" : 1776726164902627\\n\\t},\\n\\t{\\n\\t\\t\"name\" : \"oem-test\",\\n\\t\\t\"type\" : \"raw\",\\n\\t\\t\"path\" : \"/oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw\",\\n\\t\\t\"time\" : 1776770288136672\\n\\t}\\n]'\n cluster.go:125: ++ systemd-sysext status --json=pretty\n cluster.go:125: + status_out=$'[\\n\\t{\\n\\t\\t\"hierarchy\" : \"/opt\",\\n\\t\\t\"extensions\" : \"none\",\\n\\t\\t\"since\" : null\\n\\t},\\n\\t{\\n\\t\\t\"hierarchy\" : \"/usr\",\\n\\t\\t\"extensions\" : [\\n\\t\\t\\t\"containerd-flatcar\",\\n\\t\\t\\t\"docker-flatcar\",\\n\\t\\t\\t\"oem-test\"\\n\\t\\t],\\n\\t\\t\"since\" : 1776770301421000\\n\\t}\\n]'\n cluster.go:125: + printf 'sysext list:\\n%s\\nsysext status:\\n%s\\n' $'[\\n\\t{\\n\\t\\t\"name\" : \"containerd-flatcar\",\\n\\t\\t\"type\" : \"raw\",\\n\\t\\t\"path\" : \"/usr/share/flatcar/sysext/containerd-flatcar.raw\",\\n\\t\\t\"time\" : 1776726138244825\\n\\t},\\n\\t{\\n\\t\\t\"name\" : \"docker-flatcar\",\\n\\t\\t\"type\" : \"raw\",\\n\\t\\t\"path\" : \"/usr/share/flatcar/sysext/docker-flatcar.raw\",\\n\\t\\t\"time\" : 1776726164902627\\n\\t},\\n\\t{\\n\\t\\t\"name\" : \"oem-test\",\\n\\t\\t\"type\" : \"raw\",\\n\\t\\t\"path\" : \"/oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw\",\\n\\t\\t\"time\" : 1776770288136672\\n\\t}\\n]' $'[\\n\\t{\\n\\t\\t\"hierarchy\" : \"/opt\",\\n\\t\\t\"extensions\" : \"none\",\\n\\t\\t\"since\" : null\\n\\t},\\n\\t{\\n\\t\\t\"hierarchy\" : \"/usr\",\\n\\t\\t\"extensions\" : [\\n\\t\\t\\t\"containerd-flatcar\",\\n\\t\\t\\t\"docker-flatcar\",\\n\\t\\t\\t\"oem-test\"\\n\\t\\t],\\n\\t\\t\"since\" : 1776770301421000\\n\\t}\\n]'\n cluster.go:125: ++ jq '.[] | select(.name == \"oem-test\")'\n cluster.go:125: + list_oem_test=$'{\\n \"name\": \"oem-test\",\\n \"type\": \"raw\",\\n \"path\": \"/oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw\",\\n \"time\": 1776770288136672\\n}'\n cluster.go:125: + [[ -z {\n cluster.go:125: \"name\": \"oem-test\",\n cluster.go:125: \"type\": \"raw\",\n cluster.go:125: \"path\": \"/oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw\",\n cluster.go:125: \"time\": 1776770288136672\n cluster.go:125: } ]]\n cluster.go:125: ++ jq --raw-output .type\n cluster.go:125: + oem_test_type=raw\n cluster.go:125: + [[ raw != raw ]]\n cluster.go:125: ++ jq --raw-output .path\n cluster.go:125: + oem_test_path=/oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw\n cluster.go:125: ++ readlink -f /etc/extensions/oem-test.raw\n cluster.go:125: + oem_test_real_path=/oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw\n cluster.go:125: + [[ /oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw != /oem/sysext/oem\\-test\\-9999\\.0\\.0+more\\-sdk\\-fixes\\-2\\.raw ]]\n cluster.go:125: ++ jq '.[] | select(.hierarchy == \"/usr\")'\n cluster.go:125: + status_usr=$'{\\n \"hierarchy\": \"/usr\",\\n \"extensions\": [\\n \"containerd-flatcar\",\\n \"docker-flatcar\",\\n \"oem-test\"\\n ],\\n \"since\": 1776770301421000\\n}'\n cluster.go:125: + [[ -z {\n cluster.go:125: \"hierarchy\": \"/usr\",\n cluster.go:125: \"extensions\": [\n cluster.go:125: \"containerd-flatcar\",\n cluster.go:125: \"docker-flatcar\",\n cluster.go:125: \"oem-test\"\n cluster.go:125: ],\n cluster.go:125: \"since\": 1776770301421000\n cluster.go:125: } ]]\n cluster.go:125: ++ jq --raw-output '.extensions[] | select(. == \"oem-test\")'\n cluster.go:125: + status_usr_extensions_oem_test=oem-test\n cluster.go:125: + [[ oem-test != oem\\-test ]]\n cluster.go:125: + f=/usr/share/flatcar-sysext-kola-test/file\n cluster.go:125: + [[ ! -e /usr/share/flatcar-sysext-kola-test/file ]]\n cluster.go:125: ++ cat /usr/share/flatcar-sysext-kola-test/file\n cluster.go:125: + got=9999.0.0\n cluster.go:125: ++ source /etc/os-release\n cluster.go:125: +++ NAME='Flatcar Container Linux by Kinvolk'\n cluster.go:125: +++ ID=flatcar\n cluster.go:125: +++ ID_LIKE=coreos\n cluster.go:125: +++ VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ VERSION_ID=9999.0.0\n cluster.go:125: +++ BUILD_ID=more-sdk-fixes-2\n cluster.go:125: +++ SYSEXT_LEVEL=1.0\n cluster.go:125: +++ PRETTY_NAME='Flatcar Container Linux by Kinvolk 9999.0.0+more-sdk-fixes-2'\n cluster.go:125: +++ ANSI_COLOR='38;5;75'\n cluster.go:125: +++ HOME_URL=https://flatcar.org\n cluster.go:125: +++ BUG_REPORT_URL=https://issues.flatcar.org\n cluster.go:125: +++ SUPPORT_URL='https://groups.google.com/forum/#!forum/flatcar-linux-user'\n cluster.go:125: +++ FLATCAR_BOARD=amd64-usr\n cluster.go:125: +++ CPE_NAME='cpe:2.3:o:flatcar-linux:flatcar_linux:9999.0.0+more-sdk-fixes-2:*:*:*:*:*:*:*'\n cluster.go:125: ++ echo 9999.0.0\n cluster.go:125: + ex=9999.0.0\n cluster.go:125: + [[ 9999.0.0 != 9999\\.0\\.0 ]]\n"},{"name":"confext.skiprefresh","result":"PASS","duration":23488344041,"output":""},{"name":"docker.enable-service.sysext","result":"PASS","duration":23446599942,"output":" cluster.go:152: + systemctl is-enabled docker\n"},{"name":"systemd.journal.user","result":"PASS","duration":24202056897,"output":""},{"name":"cl.tang.nonroot","result":"PASS","duration":70634782394,"output":" tang.go:148: Started tang on 10.0.0.1:44769\n"},{"name":"docker.btrfs-storage","result":"PASS","duration":23971868136,"output":""},{"name":"sysext.custom-docker.sysext","result":"PASS","duration":34949306163,"output":" cluster.go:125: bash: line 1: docker: command not found\n cluster.go:125: Cloning into 'sysext-bakery'...\n cluster.go:125: Note: switching to '9850ffd5b2353f45a9b3bf4fb84f8138a149e3e7'.\n cluster.go:125: \n cluster.go:125: You are in 'detached HEAD' state. You can look around, make experimental\n cluster.go:125: changes and commit them, and you can discard any commits you make in this\n cluster.go:125: state without impacting any branches by switching back to a branch.\n cluster.go:125: \n cluster.go:125: If you want to create a new branch to retain commits you create, you may\n cluster.go:125: do so (now or later) by using -c with the switch command. Example:\n cluster.go:125: \n cluster.go:125: git switch -c \u003cnew-branch-name\u003e\n cluster.go:125: \n cluster.go:125: Or undo this operation with:\n cluster.go:125: \n cluster.go:125: git switch -\n cluster.go:125: \n cluster.go:125: Turn off this advice by setting config variable advice.detachedHead to false\n cluster.go:125: \n cluster.go:125: HEAD is now at 9850ffd Merge pull request #31 from flatcar/t-lo/fix-docker-23-containerd-shim\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n cluster.go:125: latest: Pulling from flatcar/busybox\n cluster.go:125: 4bf2067f7735: Pulling fs layer\n cluster.go:125: 4bf2067f7735: Verifying Checksum\n cluster.go:125: 4bf2067f7735: Download complete\n cluster.go:125: 4bf2067f7735: Pull complete\n cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n"},{"name":"cl.tpm.root-cryptenroll-pcr-noupdate","result":"PASS","duration":152241212684,"output":""},{"name":"docker.containerd-restart","result":"PASS","duration":81746398918,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n cluster.go:125: latest: Pulling from flatcar/busybox\n cluster.go:125: 4bf2067f7735: Pulling fs layer\n cluster.go:125: 4bf2067f7735: Verifying Checksum\n cluster.go:125: 4bf2067f7735: Download complete\n cluster.go:125: 4bf2067f7735: Pull complete\n cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n"},{"name":"coreos.ignition.resource.s3.versioned","result":"PASS","duration":23635953903,"output":""},{"name":"cl.ignition.v1.sethostname","result":"PASS","duration":22400275302,"output":""},{"name":"sysext.simple","result":"PASS","duration":25595346561,"output":""},{"name":"sysext.disable-containerd","result":"PASS","duration":22285605720,"output":""},{"name":"cl.sysext.fallbackdownload","result":"PASS","duration":49851178273,"output":" update.go:664: Rebooting test machine\n"},{"name":"kubeadm.v1.34.4.calico.base/node_readiness","result":"PASS","duration":33785552733,"output":""},{"name":"kubeadm.v1.34.4.calico.base/nginx_deployment","result":"PASS","duration":23554300010,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/node_readiness","result":"PASS","duration":16765424072,"output":""},{"name":"cl.tang.root","result":"PASS","duration":114172503407,"output":" tang.go:148: Started tang on 10.0.0.1:40983\n"},{"name":"kubeadm.v1.34.4.calico.base/NFS_deployment","result":"PASS","duration":19227258664,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.calico.base","result":"PASS","duration":210745322574,"output":" cluster.go:125: I0421 11:21:45.476957 2067 version.go:260] remote version is much newer: v1.35.4; falling back to: stable-1.34\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n cluster.go:125: I0421 11:21:55.270776 2287 version.go:260] remote version is much newer: v1.35.4; falling back to: stable-1.34\n cluster.go:125: [init] Using Kubernetes version: v1.34.7\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.36]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.002364622s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.36:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.007753757s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.246176457s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 4.005390816s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: yb0cdi.34zo87tjn7richhw\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.36:6443 --token yb0cdi.34zo87tjn7richhw \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:b2914c22e08e9abeb0f27835b03eaa4a523c84a07962f8bc82f44539dc2f0fb4 \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W0421 11:22:57.912651 1837 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.34.4.calico.base/node_readiness (33.79s)\n --- PASS: kubeadm.v1.34.4.calico.base/nginx_deployment (23.55s)\n --- PASS: kubeadm.v1.34.4.calico.base/NFS_deployment (19.23s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.cilium.base/nginx_deployment","result":"PASS","duration":11049725140,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/NFS_deployment","result":"PASS","duration":17136046751,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.tpm.eventlog","result":"PASS","duration":22395050042,"output":" cluster.go:125: WARN: Event 16 is unexectedly not extending either PCR 8, 9, 12 or 14\n"},{"name":"kubeadm.v1.35.1.cilium.base/IPSec_encryption","result":"PASS","duration":19257340232,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.35.1.cilium.base","result":"PASS","duration":213548432591,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: [init] Using Kubernetes version: v1.35.4\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.39]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.021756346s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.39:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.045285323s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 5.01129852s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 7.502815021s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: ab0cjb.uro3vefhulc7i905\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.39:6443 --token ab0cjb.uro3vefhulc7i905 \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:e1cbaf8961a1370d2c564fe1e3ddee9290af1e6dd74852218a6f2db16323f498 \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: Deployment cilium-operator \n cluster.go:125: DaemonSet cilium \n cluster.go:125: Containers: cilium \n cluster.go:125: cilium-operator \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W0421 11:23:56.866400 1837 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.cilium.base/node_readiness (16.77s)\n --- PASS: kubeadm.v1.35.1.cilium.base/nginx_deployment (11.05s)\n --- PASS: kubeadm.v1.35.1.cilium.base/NFS_deployment (17.14s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.35.1.cilium.base/IPSec_encryption (19.26s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"cl.network.listeners","result":"PASS","duration":22285216206,"output":""},{"name":"cl.tpm.root","result":"PASS","duration":78716678521,"output":""},{"name":"cl.update.reboot","result":"PASS","duration":52512110762,"output":""},{"name":"cl.ignition.v2_1.swap","result":"PASS","duration":22453371203,"output":""},{"name":"coreos.ignition.resource.remote","result":"PASS","duration":22535712779,"output":""},{"name":"cl.ignition.v2_1.ext4checkexisting","result":"PASS","duration":41620187473,"output":""},{"name":"cl.install.cloudinit","result":"PASS","duration":22355257774,"output":""},{"name":"coreos.ignition.systemd.enable-service","result":"PASS","duration":22256835836,"output":""},{"name":"coreos.ignition.sethostname","result":"PASS","duration":22261645061,"output":""},{"name":"cl.ignition.v2.users","result":"PASS","duration":22946801435,"output":""},{"name":"bpf.ig/ig","result":"PASS","duration":39902220965,"output":" cluster.go:125: + sudo ig run trace_exec:v0.50.0 --help\n cluster.go:125: + trap 'kill %%' ERR\n cluster.go:125: + sudo ig run trace_exec:v0.50.0 --host --filter proc.comm=docker,args~ps --output json --verbose\n cluster.go:125: + timeout 30 grep -F -m1 running...\n cluster.go:125: + docker info\n cluster.go:125: + docker ps\n cluster.go:125: + docker images\n cluster.go:125: + kill %%\n cluster.go:125: + wait\n cluster.go:125: + jq -s -e '.[] | select(.args == \"/usr/bin/docker\\u00a0ps\")' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.args == \"/usr/bin/docker\\u00a0info\"))' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.args == \"/usr/bin/docker\\u00a0images\"))' ig.json\n cluster.go:125: + sudo ig run trace_dns:v0.50.0 --help\n cluster.go:125: + trap 'kill %%' ERR\n cluster.go:125: + timeout 30 grep -F -m1 running...\n cluster.go:125: + sudo ig run trace_dns:v0.50.0 --host --filter name=flatcar.org. --output json --verbose\n cluster.go:125: + dig kinvolk.io\n cluster.go:125: + dig flatcar.org\n cluster.go:125: + dig stable.release.flatcar-linux.net\n cluster.go:125: + kill %%\n cluster.go:125: + wait\n cluster.go:125: + jq -s -e '.[] | select(.name == \"flatcar.org.\")' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.name == \"kinvolk.io.\"))' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.name == \"stable.release.flatcar-linux.net.\"))' ig.json\n"},{"name":"bpf.ig","result":"PASS","duration":42078780184,"output":" --- PASS: bpf.ig/ig (39.90s)\n cluster.go:125: + sudo ig run trace_exec:v0.50.0 --help\n cluster.go:125: + trap 'kill %%' ERR\n cluster.go:125: + sudo ig run trace_exec:v0.50.0 --host --filter proc.comm=docker,args~ps --output json --verbose\n cluster.go:125: + timeout 30 grep -F -m1 running...\n cluster.go:125: + docker info\n cluster.go:125: + docker ps\n cluster.go:125: + docker images\n cluster.go:125: + kill %%\n cluster.go:125: + wait\n cluster.go:125: + jq -s -e '.[] | select(.args == \"/usr/bin/docker\\u00a0ps\")' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.args == \"/usr/bin/docker\\u00a0info\"))' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.args == \"/usr/bin/docker\\u00a0images\"))' ig.json\n cluster.go:125: + sudo ig run trace_dns:v0.50.0 --help\n cluster.go:125: + trap 'kill %%' ERR\n cluster.go:125: + timeout 30 grep -F -m1 running...\n cluster.go:125: + sudo ig run trace_dns:v0.50.0 --host --filter name=flatcar.org. --output json --verbose\n cluster.go:125: + dig kinvolk.io\n cluster.go:125: + dig flatcar.org\n cluster.go:125: + dig stable.release.flatcar-linux.net\n cluster.go:125: + kill %%\n cluster.go:125: + wait\n cluster.go:125: + jq -s -e '.[] | select(.name == \"flatcar.org.\")' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.name == \"kinvolk.io.\"))' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.name == \"stable.release.flatcar-linux.net.\"))' ig.json\n"},{"name":"kubeadm.v1.35.1.calico.base/node_readiness","result":"PASS","duration":26415053195,"output":""},{"name":"cl.disk.raid1.data","result":"PASS","duration":52532799479,"output":""},{"name":"kubeadm.v1.35.1.calico.base/nginx_deployment","result":"PASS","duration":10626196040,"output":""},{"name":"kubeadm.v1.35.1.calico.base/NFS_deployment","result":"PASS","duration":17028556174,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.calico.base","result":"PASS","duration":175484890158,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: [init] Using Kubernetes version: v1.35.4\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.55]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 500.90873ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.55:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.003696184s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 1.256546512s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 3.001991116s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: cj1txx.ptnycwrtt0ck53ja\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.55:6443 --token cj1txx.ptnycwrtt0ck53ja \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:896c4abe49b1654497a0e1d4de43abb24d85571d3ff739b255689203e6834454 \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W0421 11:27:55.454611 1864 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.calico.base/node_readiness (26.42s)\n --- PASS: kubeadm.v1.35.1.calico.base/nginx_deployment (10.63s)\n --- PASS: kubeadm.v1.35.1.calico.base/NFS_deployment (17.03s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.verity/verify","result":"PASS","duration":2377980874,"output":" cluster.go:125: Success\n"},{"name":"kubeadm.v1.35.1.flannel.base/node_readiness","result":"PASS","duration":15595198637,"output":""},{"name":"kubeadm.v1.35.1.flannel.base/nginx_deployment","result":"PASS","duration":10602217353,"output":""},{"name":"kubeadm.v1.35.1.flannel.base/NFS_deployment","result":"PASS","duration":16466925375,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.flannel.base","result":"PASS","duration":151393498481,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.4\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: [init] Using Kubernetes version: v1.35.4\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.65]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 500.834721ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.65:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.346130449s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.479660321s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 4.504893506s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: bz53o6.zqikgj4jvdcdkj4a\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.65:6443 --token bz53o6.zqikgj4jvdcdkj4a \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:45a63542a42fbcbed38353408d4ab3c50868b86b33b7b76d2bd802a388115efc \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W0421 11:30:14.018774 1820 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.flannel.base/node_readiness (15.60s)\n --- PASS: kubeadm.v1.35.1.flannel.base/nginx_deployment (10.60s)\n --- PASS: kubeadm.v1.35.1.flannel.base/NFS_deployment (16.47s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.ignition.oem.wipe","result":"PASS","duration":21394240444,"output":""},{"name":"coreos.ignition.security.tls","result":"PASS","duration":42314512950,"output":""},{"name":"cl.verity/corruption","result":"PASS","duration":168896438153,"output":""},{"name":"cl.verity","result":"PASS","duration":193441666494,"output":" --- PASS: cl.verity/verify (2.38s)\n cluster.go:125: Success\n --- PASS: cl.verity/corruption (168.90s)\n"},{"name":"cl.locksmith.cluster","result":"PASS","duration":369443522984,"output":""},{"name":"cl.disk.raid0.data","result":"PASS","duration":46641975183,"output":""},{"name":"cl.cloudinit.script","result":"PASS","duration":21368237379,"output":""},{"name":"docker.network-openbsd-nc","result":"PASS","duration":26328348920,"output":" docker.go:413: creating netcat containers\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 3.72MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:094b4b8b605a61dc1a2c67068467e9bd4fdd351310cf76a04272c4d381626aa3\n cluster.go:125: #5 writing image sha256:094b4b8b605a61dc1a2c67068467e9bd4fdd351310cf76a04272c4d381626aa3 done\n cluster.go:125: #5 naming to docker.io/library/netcat done\n cluster.go:125: #5 DONE 0.0s\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 3.72MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:4e44632c499ee643e8c6debdb86b68a0d9ccb2fe8138054b52726269f53bcd23 done\n cluster.go:125: #5 naming to docker.io/library/netcat\n cluster.go:125: #5 naming to docker.io/library/netcat done\n cluster.go:125: #5 DONE 0.0s\n"},{"name":"cl.omaha.ping","result":"PASS","duration":22318413415,"output":""},{"name":"cl.ignition.kargs","result":"PASS","duration":32295826803,"output":" cluster.go:152: + cat /proc/cmdline\n"},{"name":"cl.disk.raid0.root","result":"PASS","duration":48549544230,"output":""},{"name":"devcontainer.systemd-nspawn","result":"PASS","duration":168783624819,"output":" cluster.go:125: + set -euo pipefail\n cluster.go:125: + source /home/core/download-library.sh\n cluster.go:125: + download_dev_container_image flatcar_developer_container.bin\n cluster.go:125: + local output_bin=flatcar_developer_container.bin\n cluster.go:125: + shift\n cluster.go:125: + local arch version image_url bzip2cat\n cluster.go:125: ++ source /usr/share/flatcar/release\n cluster.go:125: +++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: +++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: ++ echo amd64\n cluster.go:125: + arch=amd64\n cluster.go:125: ++ source /usr/share/flatcar/release\n cluster.go:125: +++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: +++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: ++ echo 9999.0.0+more-sdk-fixes-2\n cluster.go:125: + version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ process_template http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2 amd64 9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ local template=http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ shift\n cluster.go:125: ++ local arch=amd64\n cluster.go:125: ++ shift\n cluster.go:125: ++ local version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ shift\n cluster.go:125: ++ local result=http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/images/amd64/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ echo http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + image_url=http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + echo 'Fetching developer container from http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2'\n cluster.go:125: + curl --fail --silent --show-error --location --retry-delay 1 --retry 60 --retry-connrefused --retry-max-time 60 --connect-timeout 20 --remote-name http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + bzip2cat=bzcat\n cluster.go:125: + command -v lbzcat\n cluster.go:125: + bzip2cat=lbzcat\n cluster.go:125: + cp --sparse=always /dev/fd/63 flatcar_developer_container.bin\n cluster.go:125: ++ lbzcat flatcar_developer_container.bin.bz2\n cluster.go:125: + source /usr/share/coreos/release\n cluster.go:125: ++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: ++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: + ARCH=amd64\n cluster.go:125: + VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ process_template http://bincache.flatcar-linux.net/boards/@ARCH@-usr/@VERSION@/pkgs amd64 9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ local template=http://bincache.flatcar-linux.net/boards/@ARCH@-usr/@VERSION@/pkgs\n cluster.go:125: ++ shift\n cluster.go:125: ++ local arch=amd64\n cluster.go:125: ++ shift\n cluster.go:125: ++ local version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ shift\n cluster.go:125: ++ local result=http://bincache.flatcar-linux.net/boards/@ARCH@-usr/@VERSION@/pkgs\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/boards/amd64-usr/@VERSION@/pkgs\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: ++ echo http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: + PORTAGE_BINHOST=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: + EXPECTED_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: + workdir=/home/core/dev-container-workdir-18807\n cluster.go:125: + USR_SRC_DIR=/home/core/dev-container-workdir-18807/src\n cluster.go:125: + VAR_TMP_DIR=/home/core/dev-container-workdir-18807/tmp\n cluster.go:125: + mkdir -p /home/core/dev-container-workdir-18807/src /home/core/dev-container-workdir-18807/tmp\n cluster.go:125: + sudo systemd-nspawn --console=pipe --setenv=PORTAGE_BINHOST=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs --setenv=EXPECTED_VERSION=9999.0.0+more-sdk-fixes-2 --bind-ro=/lib/modules --bind-ro=/home/core/dev-container-script --bind=/home/core/dev-container-workdir-18807/src:/usr/src --bind=/home/core/dev-container-workdir-18807/tmp:/var/tmp --image=flatcar_developer_container.bin --machine=flatcar-developer-container /bin/bash /home/core/dev-container-script\n cluster.go:125: + source /usr/share/coreos/release\n cluster.go:125: ++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: ++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: + [[ 9999.0.0+more-sdk-fixes-2 != 9999\\.0\\.0+more\\-sdk\\-fixes\\-2 ]]\n cluster.go:125: + export PORTAGE_BINHOST=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: + PORTAGE_BINHOST=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: + export 'FEATURES=-ipc-sandbox -network-sandbox'\n cluster.go:125: + FEATURES='-ipc-sandbox -network-sandbox'\n cluster.go:125: + emerge-gitclone\n cluster.go:125: Cloning into '/var/lib/portage/scripts'...\n cluster.go:125: Note: switching to 'main-9999.0.0-more-sdk-fixes-2'.\n cluster.go:125: \n cluster.go:125: You are in 'detached HEAD' state. You can look around, make experimental\n cluster.go:125: changes and commit them, and you can discard any commits you make in this\n cluster.go:125: state without impacting any branches by switching back to a branch.\n cluster.go:125: \n cluster.go:125: If you want to create a new branch to retain commits you create, you may\n cluster.go:125: do so (now or later) by using -c with the switch command. Example:\n cluster.go:125: \n cluster.go:125: git switch -c \u003cnew-branch-name\u003e\n cluster.go:125: \n cluster.go:125: Or undo this operation with:\n cluster.go:125: \n cluster.go:125: git switch -\n cluster.go:125: \n cluster.go:125: Turn off this advice by setting config variable advice.detachedHead to false\n cluster.go:125: \n cluster.go:125: HEAD is now at 0a7224a6c2 New version: main-9999.0.0-more-sdk-fixes-2\n cluster.go:125: + emerge --getbinpkg --verbose coreos-sources\n cluster.go:125: + zcat /proc/config.gz\n cluster.go:125: ++ nproc\n cluster.go:125: + exec make -C /usr/src/linux -j4 modules_prepare V=1\n cluster.go:125: \n cluster.go:125: Error in reading or end of file.\n"},{"name":"coreos.ignition.once","result":"PASS","duration":48572106996,"output":""},{"name":"cl.cloudinit.multipart-mime","result":"PASS","duration":22716461689,"output":""},{"name":"systemd.journal.remote","result":"PASS","duration":44769766284,"output":" cluster.go:125: Running as unit: systemd-journal-remote-client.service; invocation ID: 5b6eb7c46c6d4f67861706d6486c56d8\n"},{"name":"cl.ignition.partition_on_boot_disk","result":"PASS","duration":22736612163,"output":" filesystem.go:487: lsblk -f:\nNAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS\nloop0 squashfs 4.0 \nloop2 \n|-loop2p1 erofs bcc39dae-703d-4354-84b2-246d1c78172e \n| `-114724a82fc9a6f4d155c7d0b332adb6878dee3a8f0699c95590754a087bae73-verity erofs bcc39dae-703d-4354-84b2-246d1c78172e \n|-loop2p2 DM_verity_hash 1 a61b7ebc-f4f9-4cea-9169-a107670a515f \n| `-114724a82fc9a6f4d155c7d0b332adb6878dee3a8f0699c95590754a087bae73-verity erofs bcc39dae-703d-4354-84b2-246d1c78172e \n`-loop2p3 \nloop6 \n|-loop6p1 erofs 2d8eede6-0a58-4bc2-860a-b300a8f9126c \n| `-966e3199ee3a93507490c0cb9f44dd83f0c31d8c8e54fff3b50b323b59224c39-verity erofs 2d8eede6-0a58-4bc2-860a-b300a8f9126c \n|-loop6p2 DM_verity_hash 1 934f2358-535d-41f0-b788-58d7e3e24982 \n| `-966e3199ee3a93507490c0cb9f44dd83f0c31d8c8e54fff3b50b323b59224c39-verity erofs 2d8eede6-0a58-4bc2-860a-b300a8f9126c \n`-loop6p3 \nloop7 \n|-loop7p1 erofs 7094e257-4e7d-4fc5-a2bb-0b1ae75bcc4c \n| `-cd5c97e044b141803cfd59d354adfcf0bf991a5c37d207e3bc92f4897f5b4c72-verity erofs 7094e257-4e7d-4fc5-a2bb-0b1ae75bcc4c \n|-loop7p2 DM_verity_hash 1 98a9a71b-433e-46e8-aa96-dcb3ff0f6106 \n| `-cd5c97e044b141803cfd59d354adfcf0bf991a5c37d207e3bc92f4897f5b4c72-verity erofs 7094e257-4e7d-4fc5-a2bb-0b1ae75bcc4c \n`-loop7p3 \nsr0 \nvda \n|-vda1 vfat FAT32 EFI-SYSTEM E3C8-3A30 \n|-vda2 \n|-vda3 btrfs 842cdbbd-d0f6-4553-b156-7283808d610f \n| `-usr 1.2G 0% /usr\n|-vda4 \n|-vda6 btrfs OEM 0ab135af-3714-4fa6-9aa8-293de9bdea66 1019M 0% /oem\n|-vda7 \n|-vda9 ext4 1.0 ROOT a50fcdce-fada-4350-9c5d-26e1994d850c 2.5G 0% /\n`-vda10 xfs VAR 26c4d521-5466-4f6e-8ce7-53f7ec5fde5b 8.6G 2% /var\n filesystem.go:489: findmnt:\nTARGET SOURCE FSTYPE OPTIONS\n/ /dev/vda9 ext4 rw,relatime,seclabel,mb_optimize_scan=0\n|-/boot systemd-1 autofs rw,relatime,fd=38,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=6463\n|-/media tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,seclabel\n|-/tmp tmpfs tmpfs rw,nosuid,nodev,seclabel,nr_inodes=1048576\n|-/dev devtmpfs devtmpfs rw,nosuid,seclabel,size=4096k,nr_inodes=306277,mode=755\n| |-/dev/hugepages hugetlbfs hugetlbfs rw,nosuid,nodev,relatime,seclabel,pagesize=2M\n| |-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime,seclabel\n| |-/dev/shm tmpfs tmpfs rw,nosuid,nodev,seclabel\n| `-/dev/pts devpts devpts rw,nosuid,noexec,relatime,seclabel,gid=5,mode=600,ptmxmode=000\n|-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime,seclabel\n| |-/sys/fs/selinux selinuxfs selinuxfs rw,nosuid,noexec,relatime\n| |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime,seclabel\n| |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime,seclabel\n| |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime\n| |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime\n| |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime\n| |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,seclabel,nsdelegate,memory_recursiveprot\n| |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime,seclabel\n| `-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700\n|-/proc proc proc rw,nosuid,nodev,noexec,relatime\n| `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=39,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=6467\n|-/run tmpfs tmpfs rw,nosuid,nodev,seclabel,size=493440k,nr_inodes=819200,mode=755\n| |-/run/credentials/systemd-journald.service tmpfs tmpfs ro,nosuid,nodev,noexec,relatime,nosymfollow,seclabel,size=1024k,nr_inodes=1024,mode=700,noswap\n| |-/run/user/500 tmpfs tmpfs rw,nosuid,nodev,relatime,seclabel,size=246716k,nr_inodes=61679,mode=700,uid=500,gid=500\n| |-/run/credentials/systemd-resolved.service tmpfs tmpfs ro,nosuid,nodev,noexec,relatime,nosymfollow,seclabel,size=1024k,nr_inodes=1024,mode=700,noswap\n| |-/run/credentials/systemd-networkd.service tmpfs tmpfs ro,nosuid,nodev,noexec,relatime,nosymfollow,seclabel,size=1024k,nr_inodes=1024,mode=700,noswap\n| |-/run/credentials/getty@tty1.service tmpfs tmpfs ro,nosuid,nodev,noexec,relatime,nosymfollow,seclabel,size=1024k,nr_inodes=1024,mode=700,noswap\n| `-/run/credentials/serial-getty@ttyS0.service tmpfs tmpfs ro,nosuid,nodev,noexec,relatime,nosymfollow,seclabel,size=1024k,nr_inodes=1024,mode=700,noswap\n|-/usr /dev/mapper/usr btrfs ro,relatime,seclabel,rescue=nologreplay,space_cache=v2,subvolid=5,subvol=/\n| `-/usr sysext overlay ro,nodev,relatime,seclabel,lowerdir=/run/systemd/sysext/meta/usr:/run/systemd/sysext/extensions/docker-flatcar/usr:/run/systemd/sysext/extensions/containerd-flatcar/usr:/sysroot/usr\n|-/var /dev/vda10 xfs rw,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota\n|-/oem /dev/vda6 btrfs rw,nodev,relatime,seclabel,discard=async,space_cache=v2,subvolid=5,subvol=/\n`-/etc confext overlay rw,nosuid,nodev,noexec,noatime,seclabel,lowerdir=/run/systemd/sysext/meta/etc:/run/systemd/sysext/confexts/00-flatcar-default/etc,upperdir=/sysroot/etc,workdir=/sysroot/.systemd-etc-workdir,uuid=on,metacopy=off\n `-/etc/.systemd-confext confext[/.systemd-confext] overlay ro,nosuid,nodev,noexec,noatime,seclabel,lowerdir=/run/systemd/sysext/meta/etc:/run/systemd/sysext/confexts/00-flatcar-default/etc,upperdir=/sysroot/etc,workdir=/sysroot/.systemd-etc-workdir,uuid=on,metacopy=off\n cluster.go:152: + findmnt /var\n cluster.go:152: + cat /var/hello\n"},{"name":"cl.ignition.v1.users","result":"PASS","duration":22831064244,"output":""},{"name":"cl.ignition.v1.groups","result":"PASS","duration":22584384655,"output":""},{"name":"coreos.selinux.boolean","result":"PASS","duration":47603138724,"output":""},{"name":"cl.toolbox.dnf-install","result":"PASS","duration":163508056869,"output":""},{"name":"cl.ignition.translation","result":"PASS","duration":22489359956,"output":" cluster.go:152: + ip --json address show kola | jq -r '.[] | .addr_info | .[] | select( .family == \"inet\") | .local'\n cluster.go:152: + cat /etc/systemd/network/00-dummy.network\n"},{"name":"cl.ignition.v2.btrfsroot","result":"PASS","duration":21408445203,"output":""},{"name":"cl.ignition.v2.ext4root","result":"PASS","duration":22468192475,"output":""},{"name":"cl.sysext.boot","result":"PASS","duration":93976492486,"output":" cluster.go:125: + sudo systemctl mask --now ensure-sysext\n cluster.go:125: Unit ensure-sysext.service does not exist, proceeding anyway.\n cluster.go:125: Created symlink '/etc/systemd/system/ensure-sysext.service' → '/dev/null'.\n cluster.go:125: + sudo systemctl mask --now systemd-sysext\n cluster.go:125: Created symlink '/etc/systemd/system/systemd-sysext.service' → '/dev/null'.\n cluster.go:125: + sudo mkdir -p /etc/flatcar/sysext /etc/flatcar/oem-sysext /oem/sysext /etc/extensions\n cluster.go:125: + echo ID=test\n cluster.go:125: + sudo tee /oem/oem-release\n cluster.go:125: + echo myext\n cluster.go:125: + sudo tee /etc/flatcar/enabled-sysext.conf\n cluster.go:125: + sudo touch /oem/sysext/active-oem-test /etc/flatcar/oem-sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw /etc/flatcar/oem-sysext/oem-test-1.2.3.raw /etc/flatcar/sysext/flatcar-myext-9999.0.0+more-sdk-fixes-2.raw /etc/flatcar/sysext/flatcar-myext-1.2.3.raw\n cluster.go:125: + sudo ln -fs /etc/flatcar/oem-sysext/oem-test-1.2.3.raw /etc/extensions/oem-test.raw\n cluster.go:125: + sudo ln -fs /etc/flatcar/sysext/flatcar-myext-1.2.3.raw /etc/extensions/flatcar-myext.raw\n cluster.go:125: ++ readlink -f /etc/extensions/oem-test.raw\n cluster.go:125: + '[' /oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw = /oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw ']'\n cluster.go:125: ++ readlink -f /etc/extensions/flatcar-myext.raw\n cluster.go:125: + '[' /etc/flatcar/sysext/flatcar-myext-9999.0.0+more-sdk-fixes-2.raw = /etc/flatcar/sysext/flatcar-myext-9999.0.0+more-sdk-fixes-2.raw ']'\n cluster.go:125: + sudo mv /oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw /etc/flatcar/oem-sysext/\n cluster.go:125: + sudo mv /etc/flatcar/oem-sysext/oem-test-1.2.3.raw /oem/sysext/\n cluster.go:125: + sudo ln -fs /oem/sysext/oem-test-1.2.3.raw /etc/extensions/oem-test.raw\n cluster.go:125: + sudo ln -fs /etc/flatcar/sysext/flatcar-myext-1.2.3.raw /etc/extensions/flatcar-myext.raw\n cluster.go:125: ++ readlink -f /etc/extensions/oem-test.raw\n cluster.go:125: + '[' /oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw = /oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw ']'\n cluster.go:125: ++ readlink -f /etc/extensions/flatcar-myext.raw\n cluster.go:125: + '[' /etc/flatcar/sysext/flatcar-myext-9999.0.0+more-sdk-fixes-2.raw = /etc/flatcar/sysext/flatcar-myext-9999.0.0+more-sdk-fixes-2.raw ']'\n cluster.go:125: + '[' -e /etc/flatcar/oem-sysext/oem-test-1.2.3.raw ']'\n cluster.go:125: ++ readlink -f /etc/extensions/oem-test.raw\n cluster.go:125: + '[' /oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw = /oem/sysext/oem-test-9999.0.0+more-sdk-fixes-2.raw ']'\n cluster.go:125: ++ readlink -f /etc/extensions/flatcar-myext.raw\n cluster.go:125: + '[' /etc/flatcar/sysext/flatcar-myext-9999.0.0+more-sdk-fixes-2.raw = /etc/flatcar/sysext/flatcar-myext-9999.0.0+more-sdk-fixes-2.raw ']'\n"},{"name":"linux.nfs.v4","result":"PASS","duration":42826848131,"output":" nfs.go:80: NFS server booted.\n nfs.go:85: Test file \"/tmp/tmp.3JJ5b4jiFO\" created on server.\n nfs.go:125: NFS client booted.\n nfs.go:133: Got NFS mount.\n"},{"name":"cl.ignition.v1.xfsroot","result":"PASS","duration":22511985920,"output":""},{"name":"docker.userns","result":"PASS","duration":24918882554,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 3.50MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:d8bcde89e6e4513501e11fa99b172cd80d57ca2b082b1c764506c808669d7010\n cluster.go:125: #5 writing image sha256:d8bcde89e6e4513501e11fa99b172cd80d57ca2b082b1c764506c808669d7010 done\n cluster.go:125: #5 naming to docker.io/library/userns-test done\n cluster.go:125: #5 DONE 0.0s\n"},{"name":"cl.flannel.vxlan","result":"PASS","duration":55213883144,"output":" flannel.go:121: ping from b3b32afe-ba84-4ba5-87d5-1a823ff871be(10.254.85.0) to 0265357d-58e8-4bfe-b0ac-2f9f0a63b2f1(10.254.30.0)\n"},{"name":"coreos.auth.verify","result":"PASS","duration":23272172129,"output":""},{"name":"cl.network.wireguard","result":"PASS","duration":23371682656,"output":" cluster.go:152: + ip --json address show kv0 | jq -r '.[] | .addr_info | .[] | select( .family == \"inet\") | .local'\n"},{"name":"kubeadm.v1.34.4.flannel.base/node_readiness","result":"PASS","duration":15610196183,"output":""},{"name":"kubeadm.v1.34.4.flannel.base/nginx_deployment","result":"PASS","duration":10564088820,"output":""},{"name":"kubeadm.v1.34.4.flannel.base/NFS_deployment","result":"PASS","duration":16820198990,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.flannel.base","result":"PASS","duration":146218562105,"output":" cluster.go:125: I0421 11:39:10.237928 2005 version.go:260] remote version is much newer: v1.35.4; falling back to: stable-1.34\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n cluster.go:125: I0421 11:39:17.002227 2224 version.go:260] remote version is much newer: v1.35.4; falling back to: stable-1.34\n cluster.go:125: [init] Using Kubernetes version: v1.34.7\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.102]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 501.06249ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.102:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.006719097s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 1.125913418s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 3.001351263s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: 9mk4ho.xgt5d16zi65iz273\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.102:6443 --token 9mk4ho.xgt5d16zi65iz273 \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:f02ba2d1a42fb646088cc05b552683c21532e107eadb6e00456ec608bb05d25f \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W0421 11:39:57.799931 1807 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.34.4.flannel.base/node_readiness (15.61s)\n --- PASS: kubeadm.v1.34.4.flannel.base/nginx_deployment (10.56s)\n --- PASS: kubeadm.v1.34.4.flannel.base/NFS_deployment (16.82s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.ignition.symlink","result":"PASS","duration":22457830846,"output":" cluster.go:152: + readlink /etc/localtime\n"},{"name":"kubeadm.v1.33.8.flannel.base/node_readiness","result":"PASS","duration":10483211989,"output":""},{"name":"kubeadm.v1.33.8.flannel.base/nginx_deployment","result":"PASS","duration":20908131626,"output":""},{"name":"cl.update.badverity","result":"PASS","duration":327092536131,"output":""},{"name":"kubeadm.v1.33.8.flannel.base/NFS_deployment","result":"PASS","duration":16633482518,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.33.8.flannel.base","result":"PASS","duration":151778658493,"output":" cluster.go:125: I0421 11:41:59.060800 2005 version.go:261] remote version is much newer: v1.35.4; falling back to: stable-1.33\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0\n cluster.go:125: I0421 11:42:05.441395 2214 version.go:261] remote version is much newer: v1.35.4; falling back to: stable-1.33\n cluster.go:125: [init] Using Kubernetes version: v1.33.11\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.108]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.001743495s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.108:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.503923181s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 1.647638442s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 3.001643329s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: a0116j.egbtuks9367qxzl9\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.108:6443 --token a0116j.egbtuks9367qxzl9 \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:31d2f79bdbe81ffd276ed56ba49d84209ecacfff51a9d8018edba09933afe2f5 \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W0421 11:42:45.619693 1783 joinconfiguration.go:113] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.33.8.flannel.base/node_readiness (10.48s)\n --- PASS: kubeadm.v1.33.8.flannel.base/nginx_deployment (20.91s)\n --- PASS: kubeadm.v1.33.8.flannel.base/NFS_deployment (16.63s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"devcontainer.docker","result":"PASS","duration":268339021662,"output":" cluster.go:125: + set -euo pipefail\n cluster.go:125: + source /home/core/download-library.sh\n cluster.go:125: + download_dev_container_image flatcar_developer_container.bin\n cluster.go:125: + local output_bin=flatcar_developer_container.bin\n cluster.go:125: + shift\n cluster.go:125: + local arch version image_url bzip2cat\n cluster.go:125: ++ source /usr/share/flatcar/release\n cluster.go:125: +++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: +++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: ++ echo amd64\n cluster.go:125: + arch=amd64\n cluster.go:125: ++ source /usr/share/flatcar/release\n cluster.go:125: +++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: +++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: +++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: ++ echo 9999.0.0+more-sdk-fixes-2\n cluster.go:125: + version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ process_template http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2 amd64 9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ local template=http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ shift\n cluster.go:125: ++ local arch=amd64\n cluster.go:125: ++ shift\n cluster.go:125: ++ local version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ shift\n cluster.go:125: ++ local result=http://bincache.flatcar-linux.net/images/@ARCH@/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/images/amd64/@VERSION@/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: ++ echo http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + image_url=http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + echo 'Fetching developer container from http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2'\n cluster.go:125: + curl --fail --silent --show-error --location --retry-delay 1 --retry 60 --retry-connrefused --retry-max-time 60 --connect-timeout 20 --remote-name http://bincache.flatcar-linux.net/images/amd64/9999.0.0+more-sdk-fixes-2/flatcar_developer_container.bin.bz2\n cluster.go:125: + bzip2cat=bzcat\n cluster.go:125: + command -v lbzcat\n cluster.go:125: + bzip2cat=lbzcat\n cluster.go:125: + cp --sparse=always /dev/fd/63 flatcar_developer_container.bin\n cluster.go:125: ++ lbzcat flatcar_developer_container.bin.bz2\n cluster.go:125: + source /usr/share/coreos/release\n cluster.go:125: ++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: ++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: + ARCH=amd64\n cluster.go:125: + VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ process_template http://bincache.flatcar-linux.net/boards/@ARCH@-usr/@VERSION@/pkgs amd64 9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ local template=http://bincache.flatcar-linux.net/boards/@ARCH@-usr/@VERSION@/pkgs\n cluster.go:125: ++ shift\n cluster.go:125: ++ local arch=amd64\n cluster.go:125: ++ shift\n cluster.go:125: ++ local version=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ shift\n cluster.go:125: ++ local result=http://bincache.flatcar-linux.net/boards/@ARCH@-usr/@VERSION@/pkgs\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/boards/amd64-usr/@VERSION@/pkgs\n cluster.go:125: ++ result=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: ++ echo http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: + PORTAGE_BINHOST=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: + EXPECTED_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: + workdir=/home/core/dev-container-workdir-14842\n cluster.go:125: + USR_SRC_DIR=/home/core/dev-container-workdir-14842/src\n cluster.go:125: + VAR_TMP_DIR=/home/core/dev-container-workdir-14842/tmp\n cluster.go:125: + mkdir -p /home/core/dev-container-workdir-14842/src /home/core/dev-container-workdir-14842/tmp\n cluster.go:125: ++ parted flatcar_developer_container.bin unit b print\n cluster.go:125: ++ grep Start --after-context=1\n cluster.go:125: ++ tail --lines=1\n cluster.go:125: ++ head --bytes=-2\n cluster.go:125: ++ awk '{ print $2 }'\n cluster.go:125: + offset=2097152\n cluster.go:125: + mkdir root\n cluster.go:125: + sudo mount -o loop,ro,offset=2097152 flatcar_developer_container.bin root\n cluster.go:125: + sudo tar -C root -czf dev-container-image.tar.gz .\n cluster.go:125: + sudo umount root\n cluster.go:125: + rm -f flatcar_developer_container.bin\n cluster.go:125: + docker import dev-container-image.tar.gz dev-container:42\n cluster.go:125: + sudo rm -f dev-container-image.tar.gz\n cluster.go:125: + restorecon /home/core/dev-container-script\n cluster.go:125: + docker run --log-driver=journald --env PORTAGE_BINHOST=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs --env EXPECTED_VERSION=9999.0.0+more-sdk-fixes-2 --mount type=bind,source=/lib/modules,target=/lib/modules,readonly=true --mount type=bind,source=/home/core/dev-container-script,target=/home/core/dev-container-script,readonly=true --mount type=bind,source=/home/core/dev-container-workdir-14842/src,target=/usr/src --mount type=bind,source=/home/core/dev-container-workdir-14842/tmp,target=/var/tmp dev-container:42 /bin/bash /home/core/dev-container-script\n cluster.go:125: + source /usr/share/coreos/release\n cluster.go:125: ++ FLATCAR_RELEASE_VERSION=9999.0.0+more-sdk-fixes-2\n cluster.go:125: ++ FLATCAR_RELEASE_BOARD=amd64-usr\n cluster.go:125: ++ FLATCAR_RELEASE_APPID='{e96281a6-d1af-4bde-9a0a-97b76e56dc57}'\n cluster.go:125: + [[ 9999.0.0+more-sdk-fixes-2 != 9999\\.0\\.0+more\\-sdk\\-fixes\\-2 ]]\n cluster.go:125: + export PORTAGE_BINHOST=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: + PORTAGE_BINHOST=http://bincache.flatcar-linux.net/boards/amd64-usr/9999.0.0+more-sdk-fixes-2/pkgs\n cluster.go:125: + export 'FEATURES=-ipc-sandbox -network-sandbox'\n cluster.go:125: + FEATURES='-ipc-sandbox -network-sandbox'\n cluster.go:125: + emerge-gitclone\n cluster.go:125: Cloning into '/var/lib/portage/scripts'...\n cluster.go:125: Note: switching to 'main-9999.0.0-more-sdk-fixes-2'.\n cluster.go:125: \n cluster.go:125: You are in 'detached HEAD' state. You can look around, make experimental\n cluster.go:125: changes and commit them, and you can discard any commits you make in this\n cluster.go:125: state without impacting any branches by switching back to a branch.\n cluster.go:125: \n cluster.go:125: If you want to create a new branch to retain commits you create, you may\n cluster.go:125: do so (now or later) by using -c with the switch command. Example:\n cluster.go:125: \n cluster.go:125: git switch -c \u003cnew-branch-name\u003e\n cluster.go:125: \n cluster.go:125: Or undo this operation with:\n cluster.go:125: \n cluster.go:125: git switch -\n cluster.go:125: \n cluster.go:125: Turn off this advice by setting config variable advice.detachedHead to false\n cluster.go:125: \n cluster.go:125: HEAD is now at 0a7224a6c2 New version: main-9999.0.0-more-sdk-fixes-2\n cluster.go:125: + emerge --getbinpkg --verbose coreos-sources\n cluster.go:125: Unable to unshare: EPERM (for FEATURES=\"pid-sandbox\")\n cluster.go:125: Unable to unshare: EPERM (for FEATURES=\"pid-sandbox\")\n cluster.go:125: Unable to unshare: EPERM (for FEATURES=\"pid-sandbox\")\n cluster.go:125: Unable to unshare: EPERM (for FEATURES=\"pid-sandbox\")\n cluster.go:125: Unable to unshare: EPERM (for FEATURES=\"pid-sandbox\")\n cluster.go:125: Unable to unshare: EPERM (for FEATURES=\"pid-sandbox\")\n cluster.go:125: Unable to unshare: EPERM (for FEATURES=\"pid-sandbox\")\n cluster.go:125: Unable to unshare: EPERM (for FEATURES=\"pid-sandbox\")\n cluster.go:125: + zcat /proc/config.gz\n cluster.go:125: ++ nproc\n cluster.go:125: + exec make -C /usr/src/linux -j4 modules_prepare V=1\n cluster.go:125: \n cluster.go:125: Error in reading or end of file.\n"},{"name":"cl.ignition.v2.xfsroot","result":"PASS","duration":22563488974,"output":""},{"name":"cl.ignition.oem.reuse","result":"PASS","duration":43546789972,"output":""},{"name":"docker.selinux","result":"PASS","duration":24712639659,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n cluster.go:125: latest: Pulling from flatcar/busybox\n cluster.go:125: 4bf2067f7735: Pulling fs layer\n cluster.go:125: 4bf2067f7735: Verifying Checksum\n cluster.go:125: 4bf2067f7735: Download complete\n cluster.go:125: 4bf2067f7735: Pull complete\n cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n cluster.go:125: sh: can't create /opt/hello: Permission denied\n"},{"name":"cl.etcd-member.v2-backup-restore","result":"PASS","duration":34501725905,"output":" cluster.go:125: 2026-04-21T11:44:40Z\tinfo\tetcdutl/backup_command.go:216\tignoring EntryConfChange raft entry\n cluster.go:125: 2026-04-21T11:44:40Z\tinfo\tetcdutl/backup_command.go:231\tignoring member attribute update on\t{\"entry\": \"Term:2 Index:3 Data:\\\"\\\\010\\\\202\\\\204\\\\256\\\\331\\\\375\\\\265\\\\247\\\\224\\\\021\\\\022\\\\003PUT\\\\032%/0/members/dbabcf5da5e1128/attributes\\\\\\\"S{\\\\\\\"name\\\\\\\":\\\\\\\"23ca43540ac84aaaa331c7c5b7e25d26\\\\\\\",\\\\\\\"clientURLs\\\\\\\":[\\\\\\\"http://10.0.0.114:2379\\\\\\\"]}(\\\\0002\\\\0008\\\\000H\\\\000P\\\\000X\\\\000`\\\\000h\\\\000p\\\\000x\\\\000\\\\200\\\\001\\\\000\\\" \", \"v2Req.Path\": \"/0/members/dbabcf5da5e1128/attributes\"}\n cluster.go:125: 2026-04-21T11:44:40Z\tinfo\tetcdutl/backup_command.go:252\tignoring v3 raft entry\n cluster.go:125: 2026-04-21T11:44:40Z\tinfo\tmembership/store.go:141\tTrimming membership information from the backend...\n"},{"name":"cl.osreset.ignition-rerun","result":"PASS","duration":43958134551,"output":""},{"name":"cl.ignition.oem.regular","result":"PASS","duration":42438207733,"output":""},{"name":"linux.ntp","result":"PASS","duration":21356801233,"output":""},{"name":"sysext.disable-docker","result":"PASS","duration":22283669359,"output":""},{"name":"coreos.locksmith.tls","result":"PASS","duration":45411513867,"output":""},{"name":"cl.basic/Useradd","result":"PASS","duration":239712109,"output":""},{"name":"cl.basic/MachineID","result":"PASS","duration":124654378,"output":""},{"name":"cl.basic/CloudConfig","result":"PASS","duration":469473076,"output":""},{"name":"cl.basic/Script","result":"PASS","duration":225041226,"output":""},{"name":"cl.basic/PortSSH","result":"PASS","duration":108661064,"output":""},{"name":"cl.basic/DbusPerms","result":"PASS","duration":150874384,"output":""},{"name":"cl.basic/Symlink","result":"PASS","duration":110444528,"output":""},{"name":"cl.basic/ServicesActive","result":"PASS","duration":138307521,"output":""},{"name":"cl.basic/ReadOnly","result":"PASS","duration":107195717,"output":""},{"name":"cl.basic/Microcode","result":"PASS","duration":125249919,"output":""},{"name":"cl.basic/SymlinkFlatcar","result":"PASS","duration":116360566,"output":""},{"name":"cl.basic/UpdateEngineKeys","result":"PASS","duration":113603044,"output":""},{"name":"cl.basic/RandomUUID","result":"PASS","duration":144752039,"output":""},{"name":"cl.basic","result":"PASS","duration":24697177163,"output":" --- PASS: cl.basic/Useradd (0.24s)\n --- PASS: cl.basic/MachineID (0.12s)\n --- PASS: cl.basic/CloudConfig (0.47s)\n --- PASS: cl.basic/Script (0.23s)\n --- PASS: cl.basic/PortSSH (0.11s)\n --- PASS: cl.basic/DbusPerms (0.15s)\n --- PASS: cl.basic/Symlink (0.11s)\n --- PASS: cl.basic/ServicesActive (0.14s)\n --- PASS: cl.basic/ReadOnly (0.11s)\n --- PASS: cl.basic/Microcode (0.13s)\n --- PASS: cl.basic/SymlinkFlatcar (0.12s)\n --- PASS: cl.basic/UpdateEngineKeys (0.11s)\n --- PASS: cl.basic/RandomUUID (0.14s)\n"},{"name":"cl.etcd-member.etcdctlv3","result":"PASS","duration":31633725769,"output":" cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-21T11:46:11.788949Z\",\"caller\":\"snapshot/v3_snapshot.go:65\",\"msg\":\"created temporary db file\",\"path\":\"/tmp/tmp.GiwlDKsKnM/snapshot.db.part\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-21T11:46:11.789672Z\",\"logger\":\"client\",\"caller\":\"v3@v3.5.18/maintenance.go:212\",\"msg\":\"opened snapshot stream; downloading\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-21T11:46:11.789698Z\",\"caller\":\"snapshot/v3_snapshot.go:73\",\"msg\":\"fetching snapshot\",\"endpoint\":\"127.0.0.1:2379\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-21T11:46:11.791603Z\",\"logger\":\"client\",\"caller\":\"v3@v3.5.18/maintenance.go:220\",\"msg\":\"completed snapshot read; closing\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-21T11:46:11.791637Z\",\"caller\":\"snapshot/v3_snapshot.go:88\",\"msg\":\"fetched snapshot\",\"endpoint\":\"127.0.0.1:2379\",\"size\":\"20 kB\",\"took\":\"now\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-21T11:46:11.791658Z\",\"caller\":\"snapshot/v3_snapshot.go:97\",\"msg\":\"saved\",\"path\":\"/tmp/tmp.GiwlDKsKnM/snapshot.db\"}\n cluster.go:125: Deprecated: Use `etcdutl snapshot status` instead.\n"},{"name":"cl.internet/DockerPing","result":"PASS","duration":5746977403,"output":""},{"name":"cl.internet/DockerEcho","result":"PASS","duration":443929439,"output":""},{"name":"cl.internet/NTPDate","result":"PASS","duration":6806754369,"output":""},{"name":"cl.internet/UpdateEngine","result":"PASS","duration":172611207,"output":""},{"name":"cl.internet","result":"PASS","duration":36083731939,"output":" --- PASS: cl.internet/DockerPing (5.75s)\n --- PASS: cl.internet/DockerEcho (0.44s)\n --- PASS: cl.internet/NTPDate (6.81s)\n --- PASS: cl.internet/UpdateEngine (0.17s)\n"},{"name":"kubeadm.v1.33.8.calico.base/node_readiness","result":"PASS","duration":26853524056,"output":""},{"name":"kubeadm.v1.33.8.calico.base/nginx_deployment","result":"PASS","duration":5585763340,"output":""},{"name":"kubeadm.v1.33.8.calico.base/NFS_deployment","result":"PASS","duration":17779414591,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"misc.fips","result":"PASS","duration":48481056283,"output":" cluster.go:125: Error setting digest\n cluster.go:125: 80EBC1CD9A7F0000:error:0308010C:digital envelope routines:inner_evp_generic_fetch:unsupported:../openssl-3.5.5/crypto/evp/evp_fetch.c:376:Global default library context, Algorithm (MD5 : 102), Properties ()\n cluster.go:125: 80EBC1CD9A7F0000:error:03000086:digital envelope routines:evp_md_init_internal:initialization error:../openssl-3.5.5/crypto/evp/digest.c:271:\n cluster.go:152: + cat /proc/sys/crypto/fips_enabled\n"},{"name":"kubeadm.v1.33.8.calico.base","result":"PASS","duration":156288494128,"output":" cluster.go:125: I0421 11:45:36.881042 2055 version.go:261] remote version is much newer: v1.35.4; falling back to: stable-1.33\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.11\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0\n cluster.go:125: I0421 11:45:43.771572 2274 version.go:261] remote version is much newer: v1.35.4; falling back to: stable-1.33\n cluster.go:125: [init] Using Kubernetes version: v1.33.11\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.120]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 507.587748ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.120:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.503913409s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 1.828762532s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 3.50212318s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: 54d27m.v8mpoo4em35fe7q6\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.120:6443 --token 54d27m.v8mpoo4em35fe7q6 \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:83b2a37676055cc71155e8d748679946dceb9766f846dd52b9f93ae663f05acd \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W0421 11:46:25.900052 1834 joinconfiguration.go:113] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.33.8.calico.base/node_readiness (26.85s)\n --- PASS: kubeadm.v1.33.8.calico.base/nginx_deployment (5.59s)\n --- PASS: kubeadm.v1.33.8.calico.base/NFS_deployment (17.78s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"cl.overlay.cleanup","result":"PASS","duration":48216942739,"output":""},{"name":"packages/sys-cluster/ipvsadm","result":"PASS","duration":608930321,"output":""},{"name":"cl.flannel.udp","result":"PASS","duration":140940077781,"output":" cluster.go:125: Timeout occurred while waiting for network connectivity.\n flannel.go:121: ping from 202261cb-87ec-4741-b934-0fcf107d886c(10.254.5.0) to 659a7584-3f05-48a4-83ec-14f5b760280b(10.254.25.1)\n"},{"name":"cl.ignition.v1.btrfsroot","result":"PASS","duration":22564009489,"output":""},{"name":"packages/sys-block/open-iscsi","result":"PASS","duration":36460534530,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/targetcli-fb:latest' locally\n cluster.go:125: latest: Pulling from flatcar/targetcli-fb\n cluster.go:125: a2318d6c47ec: Pulling fs layer\n cluster.go:125: 3d3086a1439f: Pulling fs layer\n cluster.go:125: a2318d6c47ec: Download complete\n cluster.go:125: 3d3086a1439f: Verifying Checksum\n cluster.go:125: 3d3086a1439f: Download complete\n cluster.go:125: a2318d6c47ec: Pull complete\n cluster.go:125: 3d3086a1439f: Pull complete\n cluster.go:125: Digest: sha256:b6cd65db981974e8b74938617218dd023775b969f9a059ced21e6ce6fa4763c1\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/targetcli-fb:latest\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: Created symlink '/etc/systemd/system/remote-fs.target.wants/iscsi.service' → '/usr/lib/systemd/system/iscsi.service'.\n"},{"name":"kubeadm.v1.34.4.cilium.base/node_readiness","result":"PASS","duration":10651615951,"output":""},{"name":"packages","result":"PASS","duration":59559252307,"output":" --- PASS: packages/sys-cluster/ipvsadm (0.61s)\n --- PASS: packages/sys-block/open-iscsi (36.46s)\n cluster.go:125: Unable to find image 'ghcr.io/flatcar/targetcli-fb:latest' locally\n cluster.go:125: latest: Pulling from flatcar/targetcli-fb\n cluster.go:125: a2318d6c47ec: Pulling fs layer\n cluster.go:125: 3d3086a1439f: Pulling fs layer\n cluster.go:125: a2318d6c47ec: Download complete\n cluster.go:125: 3d3086a1439f: Verifying Checksum\n cluster.go:125: 3d3086a1439f: Download complete\n cluster.go:125: a2318d6c47ec: Pull complete\n cluster.go:125: 3d3086a1439f: Pull complete\n cluster.go:125: Digest: sha256:b6cd65db981974e8b74938617218dd023775b969f9a059ced21e6ce6fa4763c1\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/targetcli-fb:latest\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: Created symlink '/etc/systemd/system/remote-fs.target.wants/iscsi.service' → '/usr/lib/systemd/system/iscsi.service'.\n"},{"name":"kubeadm.v1.34.4.cilium.base/nginx_deployment","result":"PASS","duration":10694729047,"output":""},{"name":"docker.lib-coreos-dockerd-compat/docker-info","result":"PASS","duration":777640997,"output":""},{"name":"docker.lib-coreos-dockerd-compat/resources","result":"PASS","duration":3605445541,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 3.46MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:b0c3e6b88071679dba3d3883eebe758da504fe258630c654a9d88e05054db351\n cluster.go:125: #5 writing image sha256:b0c3e6b88071679dba3d3883eebe758da504fe258630c654a9d88e05054db351 done\n cluster.go:125: #5 naming to docker.io/library/sleep done\n cluster.go:125: #5 DONE 0.0s\n cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n"},{"name":"kubeadm.v1.34.4.cilium.base/NFS_deployment","result":"PASS","duration":11591439229,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.cilium.base/IPSec_encryption","result":"PASS","duration":16853572778,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.34.4.cilium.base","result":"PASS","duration":145942554482,"output":" cluster.go:125: I0421 11:48:14.008420 2056 version.go:260] remote version is much newer: v1.35.4; falling back to: stable-1.34\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.7\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n cluster.go:125: I0421 11:48:20.140521 2278 version.go:260] remote version is much newer: v1.35.4; falling back to: stable-1.34\n cluster.go:125: [init] Using Kubernetes version: v1.34.7\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.131]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.001571423s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.131:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 504.701273ms\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 1.541658974s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 3.503253883s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: kp68ng.9fi4nn57iwq6rkbq\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.131:6443 --token kp68ng.9fi4nn57iwq6rkbq \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:7b6b9c2ad9cb9be467bcb1c3395f6f44405390110ab8a395916a47b2fbfc889e \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: Deployment cilium-operator \n cluster.go:125: DaemonSet cilium \n cluster.go:125: Containers: cilium \n cluster.go:125: cilium-operator \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W0421 11:48:52.424340 1834 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.34.4.cilium.base/node_readiness (10.65s)\n --- PASS: kubeadm.v1.34.4.cilium.base/nginx_deployment (10.69s)\n --- PASS: kubeadm.v1.34.4.cilium.base/NFS_deployment (11.59s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.34.4.cilium.base/IPSec_encryption (16.85s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"linux.nfs.v3","result":"PASS","duration":44273212878,"output":" nfs.go:80: NFS server booted.\n nfs.go:85: Test file \"/tmp/tmp.u3Jv236Udu\" created on server.\n nfs.go:125: NFS client booted.\n nfs.go:133: Got NFS mount.\n"},{"name":"cl.ignition.oem.indirect","result":"PASS","duration":43504759049,"output":""},{"name":"cl.tpm.root-cryptenroll","result":"PASS","duration":58677421690,"output":""},{"name":"cl.users.shells","result":"PASS","duration":22271464276,"output":""},{"name":"docker.base/docker-info","result":"PASS","duration":890376114,"output":""},{"name":"docker.base/resources","result":"PASS","duration":2573669367,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 3.46MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:2a3246aa4d5e6de26efea96940382b182bcf81b359961de85f8b521fe32f8331\n cluster.go:125: #5 writing image sha256:2a3246aa4d5e6de26efea96940382b182bcf81b359961de85f8b521fe32f8331 done\n cluster.go:125: #5 naming to docker.io/library/sleep done\n cluster.go:125: #5 DONE 0.0s\n cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n"},{"name":"docker.lib-coreos-dockerd-compat/networks-reliably","result":"PASS","duration":124065053070,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 5.43MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:9c82bbc02189a6ef0f93056575571c00c98edda53fe2638315fee4b65f38d071\n cluster.go:125: #5 writing image sha256:9c82bbc02189a6ef0f93056575571c00c98edda53fe2638315fee4b65f38d071 done\n cluster.go:125: #5 naming to docker.io/library/ping done\n cluster.go:125: #5 DONE 0.0s\n"},{"name":"docker.lib-coreos-dockerd-compat/user-no-caps","result":"PASS","duration":768117661,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 6.41MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:f7f817993629098cfd074e6ac05a5b266307cc83f89466f336c62cafe21478a6\n cluster.go:125: #5 writing image sha256:f7f817993629098cfd074e6ac05a5b266307cc83f89466f336c62cafe21478a6 done\n cluster.go:125: #5 naming to docker.io/library/captest done\n cluster.go:125: #5 DONE 0.0s\n"},{"name":"docker.lib-coreos-dockerd-compat/ownership","result":"PASS","duration":4072579941,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n cluster.go:125: latest: Pulling from flatcar/nginx\n cluster.go:125: 9d11882d4b58: Pulling fs layer\n cluster.go:125: b44d445f805d: Pulling fs layer\n cluster.go:125: 8bef7a9ebe88: Pulling fs layer\n cluster.go:125: a0f1c91fa11d: Pulling fs layer\n cluster.go:125: 2044bb7170df: Pulling fs layer\n cluster.go:125: 95d77c54a9aa: Pulling fs layer\n cluster.go:125: c13dd6bf8c10: Pulling fs layer\n cluster.go:125: 2044bb7170df: Waiting\n cluster.go:125: 95d77c54a9aa: Waiting\n cluster.go:125: c13dd6bf8c10: Waiting\n cluster.go:125: a0f1c91fa11d: Waiting\n cluster.go:125: 8bef7a9ebe88: Verifying Checksum\n cluster.go:125: 8bef7a9ebe88: Download complete\n cluster.go:125: b44d445f805d: Verifying Checksum\n cluster.go:125: b44d445f805d: Download complete\n cluster.go:125: 9d11882d4b58: Verifying Checksum\n cluster.go:125: 9d11882d4b58: Download complete\n cluster.go:125: a0f1c91fa11d: Verifying Checksum\n cluster.go:125: a0f1c91fa11d: Download complete\n cluster.go:125: 95d77c54a9aa: Verifying Checksum\n cluster.go:125: 95d77c54a9aa: Download complete\n cluster.go:125: c13dd6bf8c10: Download complete\n cluster.go:125: 2044bb7170df: Verifying Checksum\n cluster.go:125: 2044bb7170df: Download complete\n cluster.go:125: 9d11882d4b58: Pull complete\n cluster.go:125: b44d445f805d: Pull complete\n cluster.go:125: 8bef7a9ebe88: Pull complete\n cluster.go:125: a0f1c91fa11d: Pull complete\n cluster.go:125: 2044bb7170df: Pull complete\n cluster.go:125: 95d77c54a9aa: Pull complete\n cluster.go:125: c13dd6bf8c10: Pull complete\n cluster.go:125: Digest: sha256:6f170eb5f8ea893d94fe3c05cef69270f16614a99d3d922ce8a320efc43b8591\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"docker.lib-coreos-dockerd-compat","result":"PASS","duration":155820819703,"output":" --- PASS: docker.lib-coreos-dockerd-compat/docker-info (0.78s)\n --- PASS: docker.lib-coreos-dockerd-compat/resources (3.61s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 3.46MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:b0c3e6b88071679dba3d3883eebe758da504fe258630c654a9d88e05054db351\n cluster.go:125: #5 writing image sha256:b0c3e6b88071679dba3d3883eebe758da504fe258630c654a9d88e05054db351 done\n cluster.go:125: #5 naming to docker.io/library/sleep done\n cluster.go:125: #5 DONE 0.0s\n cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n --- PASS: docker.lib-coreos-dockerd-compat/networks-reliably (124.07s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 5.43MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:9c82bbc02189a6ef0f93056575571c00c98edda53fe2638315fee4b65f38d071\n cluster.go:125: #5 writing image sha256:9c82bbc02189a6ef0f93056575571c00c98edda53fe2638315fee4b65f38d071 done\n cluster.go:125: #5 naming to docker.io/library/ping done\n cluster.go:125: #5 DONE 0.0s\n --- PASS: docker.lib-coreos-dockerd-compat/user-no-caps (0.77s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 6.41MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:f7f817993629098cfd074e6ac05a5b266307cc83f89466f336c62cafe21478a6\n cluster.go:125: #5 writing image sha256:f7f817993629098cfd074e6ac05a5b266307cc83f89466f336c62cafe21478a6 done\n cluster.go:125: #5 naming to docker.io/library/captest done\n cluster.go:125: #5 DONE 0.0s\n --- PASS: docker.lib-coreos-dockerd-compat/ownership (4.07s)\n cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n cluster.go:125: latest: Pulling from flatcar/nginx\n cluster.go:125: 9d11882d4b58: Pulling fs layer\n cluster.go:125: b44d445f805d: Pulling fs layer\n cluster.go:125: 8bef7a9ebe88: Pulling fs layer\n cluster.go:125: a0f1c91fa11d: Pulling fs layer\n cluster.go:125: 2044bb7170df: Pulling fs layer\n cluster.go:125: 95d77c54a9aa: Pulling fs layer\n cluster.go:125: c13dd6bf8c10: Pulling fs layer\n cluster.go:125: 2044bb7170df: Waiting\n cluster.go:125: 95d77c54a9aa: Waiting\n cluster.go:125: c13dd6bf8c10: Waiting\n cluster.go:125: a0f1c91fa11d: Waiting\n cluster.go:125: 8bef7a9ebe88: Verifying Checksum\n cluster.go:125: 8bef7a9ebe88: Download complete\n cluster.go:125: b44d445f805d: Verifying Checksum\n cluster.go:125: b44d445f805d: Download complete\n cluster.go:125: 9d11882d4b58: Verifying Checksum\n cluster.go:125: 9d11882d4b58: Download complete\n cluster.go:125: a0f1c91fa11d: Verifying Checksum\n cluster.go:125: a0f1c91fa11d: Download complete\n cluster.go:125: 95d77c54a9aa: Verifying Checksum\n cluster.go:125: 95d77c54a9aa: Download complete\n cluster.go:125: c13dd6bf8c10: Download complete\n cluster.go:125: 2044bb7170df: Verifying Checksum\n cluster.go:125: 2044bb7170df: Download complete\n cluster.go:125: 9d11882d4b58: Pull complete\n cluster.go:125: b44d445f805d: Pull complete\n cluster.go:125: 8bef7a9ebe88: Pull complete\n cluster.go:125: a0f1c91fa11d: Pull complete\n cluster.go:125: 2044bb7170df: Pull complete\n cluster.go:125: 95d77c54a9aa: Pull complete\n cluster.go:125: c13dd6bf8c10: Pull complete\n cluster.go:125: Digest: sha256:6f170eb5f8ea893d94fe3c05cef69270f16614a99d3d922ce8a320efc43b8591\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"cl.network.iptables","result":"PASS","duration":22286627523,"output":" cluster.go:152: + sudo nft --json list ruleset | jq '.nftables[] | select(.rule) | .rule.expr[0].match.right'\n"},{"name":"cl.ignition.oem.indirect.new","result":"PASS","duration":43741366529,"output":""},{"name":"cl.cloudinit.basic","result":"PASS","duration":22447715429,"output":""},{"name":"docker.base/networks-reliably","result":"PASS","duration":124251906266,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 5.43MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:ddcfb4a45986d2d1563550bd5f7ed4f0c5ef7c70b443556aca953bcae300f8c0\n cluster.go:125: #5 writing image sha256:ddcfb4a45986d2d1563550bd5f7ed4f0c5ef7c70b443556aca953bcae300f8c0 done\n cluster.go:125: #5 naming to docker.io/library/ping done\n cluster.go:125: #5 DONE 0.0s\n"},{"name":"docker.base/user-no-caps","result":"PASS","duration":796151593,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 6.41MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:a3b0e48541108704601cab2d560bf584840ebcb18e70267da573047a13d7251f\n cluster.go:125: #5 writing image sha256:a3b0e48541108704601cab2d560bf584840ebcb18e70267da573047a13d7251f done\n cluster.go:125: #5 naming to docker.io/library/captest done\n cluster.go:125: #5 DONE 0.0s\n"},{"name":"docker.base/ownership","result":"PASS","duration":4306643878,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n cluster.go:125: latest: Pulling from flatcar/nginx\n cluster.go:125: 9d11882d4b58: Pulling fs layer\n cluster.go:125: b44d445f805d: Pulling fs layer\n cluster.go:125: 8bef7a9ebe88: Pulling fs layer\n cluster.go:125: a0f1c91fa11d: Pulling fs layer\n cluster.go:125: 2044bb7170df: Pulling fs layer\n cluster.go:125: 95d77c54a9aa: Pulling fs layer\n cluster.go:125: c13dd6bf8c10: Pulling fs layer\n cluster.go:125: a0f1c91fa11d: Waiting\n cluster.go:125: 2044bb7170df: Waiting\n cluster.go:125: 95d77c54a9aa: Waiting\n cluster.go:125: c13dd6bf8c10: Waiting\n cluster.go:125: 8bef7a9ebe88: Download complete\n cluster.go:125: 9d11882d4b58: Verifying Checksum\n cluster.go:125: 9d11882d4b58: Download complete\n cluster.go:125: b44d445f805d: Verifying Checksum\n cluster.go:125: b44d445f805d: Download complete\n cluster.go:125: a0f1c91fa11d: Download complete\n cluster.go:125: 2044bb7170df: Verifying Checksum\n cluster.go:125: 2044bb7170df: Download complete\n cluster.go:125: 95d77c54a9aa: Verifying Checksum\n cluster.go:125: 95d77c54a9aa: Download complete\n cluster.go:125: c13dd6bf8c10: Verifying Checksum\n cluster.go:125: c13dd6bf8c10: Download complete\n cluster.go:125: 9d11882d4b58: Pull complete\n cluster.go:125: b44d445f805d: Pull complete\n cluster.go:125: 8bef7a9ebe88: Pull complete\n cluster.go:125: a0f1c91fa11d: Pull complete\n cluster.go:125: 2044bb7170df: Pull complete\n cluster.go:125: 95d77c54a9aa: Pull complete\n cluster.go:125: c13dd6bf8c10: Pull complete\n cluster.go:125: Digest: sha256:6f170eb5f8ea893d94fe3c05cef69270f16614a99d3d922ce8a320efc43b8591\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"docker.base","result":"PASS","duration":155109672375,"output":" --- PASS: docker.base/docker-info (0.89s)\n --- PASS: docker.base/resources (2.57s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 3.46MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:2a3246aa4d5e6de26efea96940382b182bcf81b359961de85f8b521fe32f8331\n cluster.go:125: #5 writing image sha256:2a3246aa4d5e6de26efea96940382b182bcf81b359961de85f8b521fe32f8331 done\n cluster.go:125: #5 naming to docker.io/library/sleep done\n cluster.go:125: #5 DONE 0.0s\n cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n --- PASS: docker.base/networks-reliably (124.25s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 5.43MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:ddcfb4a45986d2d1563550bd5f7ed4f0c5ef7c70b443556aca953bcae300f8c0\n cluster.go:125: #5 writing image sha256:ddcfb4a45986d2d1563550bd5f7ed4f0c5ef7c70b443556aca953bcae300f8c0 done\n cluster.go:125: #5 naming to docker.io/library/ping done\n cluster.go:125: #5 DONE 0.0s\n --- PASS: docker.base/user-no-caps (0.80s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 6.41MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:a3b0e48541108704601cab2d560bf584840ebcb18e70267da573047a13d7251f\n cluster.go:125: #5 writing image sha256:a3b0e48541108704601cab2d560bf584840ebcb18e70267da573047a13d7251f done\n cluster.go:125: #5 naming to docker.io/library/captest done\n cluster.go:125: #5 DONE 0.0s\n --- PASS: docker.base/ownership (4.31s)\n cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n cluster.go:125: latest: Pulling from flatcar/nginx\n cluster.go:125: 9d11882d4b58: Pulling fs layer\n cluster.go:125: b44d445f805d: Pulling fs layer\n cluster.go:125: 8bef7a9ebe88: Pulling fs layer\n cluster.go:125: a0f1c91fa11d: Pulling fs layer\n cluster.go:125: 2044bb7170df: Pulling fs layer\n cluster.go:125: 95d77c54a9aa: Pulling fs layer\n cluster.go:125: c13dd6bf8c10: Pulling fs layer\n cluster.go:125: a0f1c91fa11d: Waiting\n cluster.go:125: 2044bb7170df: Waiting\n cluster.go:125: 95d77c54a9aa: Waiting\n cluster.go:125: c13dd6bf8c10: Waiting\n cluster.go:125: 8bef7a9ebe88: Download complete\n cluster.go:125: 9d11882d4b58: Verifying Checksum\n cluster.go:125: 9d11882d4b58: Download complete\n cluster.go:125: b44d445f805d: Verifying Checksum\n cluster.go:125: b44d445f805d: Download complete\n cluster.go:125: a0f1c91fa11d: Download complete\n cluster.go:125: 2044bb7170df: Verifying Checksum\n cluster.go:125: 2044bb7170df: Download complete\n cluster.go:125: 95d77c54a9aa: Verifying Checksum\n cluster.go:125: 95d77c54a9aa: Download complete\n cluster.go:125: c13dd6bf8c10: Verifying Checksum\n cluster.go:125: c13dd6bf8c10: Download complete\n cluster.go:125: 9d11882d4b58: Pull complete\n cluster.go:125: b44d445f805d: Pull complete\n cluster.go:125: 8bef7a9ebe88: Pull complete\n cluster.go:125: a0f1c91fa11d: Pull complete\n cluster.go:125: 2044bb7170df: Pull complete\n cluster.go:125: 95d77c54a9aa: Pull complete\n cluster.go:125: c13dd6bf8c10: Pull complete\n cluster.go:125: Digest: sha256:6f170eb5f8ea893d94fe3c05cef69270f16614a99d3d922ce8a320efc43b8591\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"cl.etcd-member.discovery","result":"PASS","duration":32850279205,"output":""},{"name":"cl.ignition.oem.regular.new","result":"PASS","duration":42434172187,"output":""},{"name":"cl.ignition.v1.once","result":"PASS","duration":48349842175,"output":""},{"name":"cl.tpm.root-cryptenroll-pcr-withupdate","result":"PASS","duration":175851100630,"output":" cluster.go:125: New TPM2 token enrolled as key slot 1.\n cluster.go:125: Wiped slot 2.\n"},{"name":"coreos.update.badusr","result":"PASS","duration":326102553836,"output":""}],"result":"PASS","platform":"qemu","version":"9999.0.0"}