{"tests":[{"name":"packages/sys-cluster/ipvsadm","result":"PASS","duration":1452951042,"output":""},{"name":"sysext.custom-docker.sysext","result":"PASS","duration":133967236032,"output":"        cluster.go:125: bash: line 1: docker: command not found\n        cluster.go:125: Cloning into 'sysext-bakery'...\n        cluster.go:125: Note: switching to '9850ffd5b2353f45a9b3bf4fb84f8138a149e3e7'.\n        cluster.go:125: \n        cluster.go:125: You are in 'detached HEAD' state. You can look around, make experimental\n        cluster.go:125: changes and commit them, and you can discard any commits you make in this\n        cluster.go:125: state without impacting any branches by switching back to a branch.\n        cluster.go:125: \n        cluster.go:125: If you want to create a new branch to retain commits you create, you may\n        cluster.go:125: do so (now or later) by using -c with the switch command. Example:\n        cluster.go:125: \n        cluster.go:125:   git switch -c \u003cnew-branch-name\u003e\n        cluster.go:125: \n        cluster.go:125: Or undo this operation with:\n        cluster.go:125: \n        cluster.go:125:   git switch -\n        cluster.go:125: \n        cluster.go:125: Turn off this advice by setting config variable advice.detachedHead to false\n        cluster.go:125: \n        cluster.go:125: HEAD is now at 9850ffd Merge pull request #31 from flatcar/t-lo/fix-docker-23-containerd-shim\n        cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n        cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n        cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n        cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n        cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n        cluster.go:125: latest: Pulling from flatcar/busybox\n        cluster.go:125: 4bf2067f7735: Pulling fs layer\n        cluster.go:125: 4bf2067f7735: Verifying Checksum\n        cluster.go:125: 4bf2067f7735: Download complete\n        cluster.go:125: 4bf2067f7735: Pull complete\n        cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n        cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n        cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n        cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n        cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n        cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n"},{"name":"packages/sys-block/open-iscsi","result":"PASS","duration":151401060079,"output":"        cluster.go:125: Unable to find image 'ghcr.io/flatcar/targetcli-fb:latest' locally\n        cluster.go:125: latest: Pulling from flatcar/targetcli-fb\n        cluster.go:125: a2318d6c47ec: Pulling fs layer\n        cluster.go:125: 3d3086a1439f: Pulling fs layer\n        cluster.go:125: a2318d6c47ec: Verifying Checksum\n        cluster.go:125: a2318d6c47ec: Download complete\n        cluster.go:125: 3d3086a1439f: Verifying Checksum\n        cluster.go:125: 3d3086a1439f: Download complete\n        cluster.go:125: a2318d6c47ec: Pull complete\n        cluster.go:125: 3d3086a1439f: Pull complete\n        cluster.go:125: Digest: sha256:b6cd65db981974e8b74938617218dd023775b969f9a059ced21e6ce6fa4763c1\n        cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/targetcli-fb:latest\n        cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n        cluster.go:125: Created symlink '/etc/systemd/system/remote-fs.target.wants/iscsi.service' → '/usr/lib/systemd/system/iscsi.service'.\n"},{"name":"packages","result":"PASS","duration":219579611577,"output":"    --- PASS: packages/sys-cluster/ipvsadm (1.45s)\n    --- PASS: packages/sys-block/open-iscsi (151.40s)\n            cluster.go:125: Unable to find image 'ghcr.io/flatcar/targetcli-fb:latest' locally\n            cluster.go:125: latest: Pulling from flatcar/targetcli-fb\n            cluster.go:125: a2318d6c47ec: Pulling fs layer\n            cluster.go:125: 3d3086a1439f: Pulling fs layer\n            cluster.go:125: a2318d6c47ec: Verifying Checksum\n            cluster.go:125: a2318d6c47ec: Download complete\n            cluster.go:125: 3d3086a1439f: Verifying Checksum\n            cluster.go:125: 3d3086a1439f: Download complete\n            cluster.go:125: a2318d6c47ec: Pull complete\n            cluster.go:125: 3d3086a1439f: Pull complete\n            cluster.go:125: Digest: sha256:b6cd65db981974e8b74938617218dd023775b969f9a059ced21e6ce6fa4763c1\n            cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/targetcli-fb:latest\n            cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n            cluster.go:125: Created symlink '/etc/systemd/system/remote-fs.target.wants/iscsi.service' → '/usr/lib/systemd/system/iscsi.service'.\n"},{"name":"kubeadm.v1.33.8.calico.base","result":"FAIL","duration":852971621119,"output":"        cluster.go:125: I0428 14:49:46.613767    2140 version.go:261] remote version is much newer: v1.36.0; falling back to: stable-1.33\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0\n        cluster.go:125: I0428 14:53:44.850015    2607 version.go:261] remote version is much newer: v1.36.0; falling back to: stable-1.33\n        cluster.go:125: [init] Using Kubernetes version: v1.33.11\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.6]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 7.659097276s\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.6:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 17.779324487s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 22.974143929s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 44.883727174s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: 5hiquy.12x15ebhhlijtrhw\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.6:6443 --token 5hiquy.12x15ebhhlijtrhw \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:76e9dc4d3c496d46e4e70435f7ce73c3378b2b5b68725c7d35a89a00f8add8a9 \n        cluster.go:125: namespace/tigera-operator created\n        cluster.go:125: serviceaccount/tigera-operator created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: deployment.apps/tigera-operator created\n        cluster.go:125: error: timed out waiting for the condition\n        kubeadm.go:197: unable to setup cluster: unable to run master script: Process exited with status 1\n"},{"name":"kubeadm.v1.35.1.cilium.base","result":"FAIL","duration":1109861972437,"output":"        cluster.go:125: I0428 14:51:00.595897    2129 version.go:260] remote version is much newer: v1.36.0; falling back to: stable-1.35\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n        cluster.go:125: I0428 14:53:23.399523    2511 version.go:260] remote version is much newer: v1.36.0; falling back to: stable-1.35\n        cluster.go:125: [init] Using Kubernetes version: v1.35.4\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.8]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 4.626981928s\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.8:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 19.380052531s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 42.662917508s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 2m26.098518605s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: 2e88mw.pw36pwzb7lp7h955\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.8:6443 --token 2e88mw.pw36pwzb7lp7h955 \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:af280091716cd71dd49d6a9c0234a7e3d904151a758c077b2dd359f50d09a360 \n        cluster.go:125: i  Using Cilium version 1.12.5\n        cluster.go:125: ? Auto-detected cluster name: kubernetes\n        cluster.go:125: ? Auto-detected datapath mode: tunnel\n        cluster.go:125: ? Auto-detected kube-proxy has been installed\n        cluster.go:125: i  helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n        cluster.go:125: i  Storing helm values file in kube-system/cilium-cli-helm-values Secret\n        cluster.go:125: ? Created CA in secret cilium-ca\n        cluster.go:125: ? Generating certificates for Hubble...\n        cluster.go:125: ? Creating Service accounts...\n        cluster.go:125: ? Creating Cluster roles...\n        cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n        cluster.go:125: i  Manual overwrite in ConfigMap: enable-endpoint-routes=true\n        cluster.go:125: i  Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n        cluster.go:125: ? Creating Agent DaemonSet...\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: ? Creating Operator Deployment...\n        cluster.go:125: ? Waiting for Cilium to be installed and ready...\n        cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n        cluster.go:125: \u001b[33m    /??\\\n        cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m    Cilium:         \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m    Operator:       \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m    Hubble:         \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m    ClusterMesh:    \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[34m    \\__/\n        cluster.go:125: \u001b[0m\n        cluster.go:125: DaemonSet        cilium             \n        cluster.go:125: Deployment       cilium-operator    \n        cluster.go:125: Containers:      cilium             \n        cluster.go:125:                  cilium-operator    \n        cluster.go:125: Cluster Pods:    0/0 managed by Cilium\n        cluster.go:125: W0428 15:00:24.480893    1863 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: error: error execution phase kubelet-wait-bootstrap: failed while waiting for TLS bootstrap: context deadline exceeded\n        cluster.go:125: To see the stack trace of this error execute with --v=5 or higher\n        kubeadm.go:197: unable to setup cluster: unable to run worker script: Process exited with status 1\n"},{"name":"kubeadm.v1.34.4.cilium.base/node_readiness","result":"PASS","duration":43711062565,"output":""},{"name":"kubeadm.v1.34.4.cilium.base/nginx_deployment","result":"PASS","duration":13248495118,"output":""},{"name":"kubeadm.v1.34.4.cilium.base/NFS_deployment","result":"PASS","duration":32449174755,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.cilium.base/IPSec_encryption","result":"PASS","duration":19373517950,"output":"        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.34.4.cilium.base","result":"PASS","duration":1176912057127,"output":"        cluster.go:125: I0428 14:56:30.989630    2170 version.go:260] remote version is much newer: v1.36.0; falling back to: stable-1.34\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.7\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.7\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.7\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.7\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n        cluster.go:125: I0428 14:59:39.384211    2573 version.go:260] remote version is much newer: v1.36.0; falling back to: stable-1.34\n        cluster.go:125: [init] Using Kubernetes version: v1.34.7\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.10]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 6.003442992s\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.10:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 6.929464654s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 20.802865122s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 52.151576427s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: qunm6k.yr0wuzwlqs9ya1rb\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.10:6443 --token qunm6k.yr0wuzwlqs9ya1rb \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:c4b23d8840e838db6a648f0c4e06247d5ffb18d40c3a395f9d50423b00b375c9 \n        cluster.go:125: i  Using Cilium version 1.12.5\n        cluster.go:125: ? Auto-detected cluster name: kubernetes\n        cluster.go:125: ? Auto-detected datapath mode: tunnel\n        cluster.go:125: ? Auto-detected kube-proxy has been installed\n        cluster.go:125: i  helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n        cluster.go:125: i  Storing helm values file in kube-system/cilium-cli-helm-values Secret\n        cluster.go:125: ? Created CA in secret cilium-ca\n        cluster.go:125: ? Generating certificates for Hubble...\n        cluster.go:125: ? Creating Service accounts...\n        cluster.go:125: ? Creating Cluster roles...\n        cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n        cluster.go:125: i  Manual overwrite in ConfigMap: enable-endpoint-routes=true\n        cluster.go:125: i  Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n        cluster.go:125: ? Creating Agent DaemonSet...\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: ? Creating Operator Deployment...\n        cluster.go:125: ? Waiting for Cilium to be installed and ready...\n        cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n        cluster.go:125: \u001b[33m    /??\\\n        cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m    Cilium:         \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m    Operator:       \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m    Hubble:         \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m    ClusterMesh:    \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[34m    \\__/\n        cluster.go:125: \u001b[0m\n        cluster.go:125: DaemonSet        cilium             \n        cluster.go:125: Deployment       cilium-operator    \n        cluster.go:125: Containers:      cilium             \n        cluster.go:125:                  cilium-operator    \n        cluster.go:125: Cluster Pods:    0/0 managed by Cilium\n        cluster.go:125: W0428 15:06:09.147990    1873 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.34.4.cilium.base/node_readiness (43.71s)\n    --- PASS: kubeadm.v1.34.4.cilium.base/nginx_deployment (13.25s)\n    --- PASS: kubeadm.v1.34.4.cilium.base/NFS_deployment (32.45s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n    --- PASS: kubeadm.v1.34.4.cilium.base/IPSec_encryption (19.37s)\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"}],"result":"FAIL","platform":"qemu","version":"4676.0.0"}