{"tests":[{"name":"coreos.auth.verify","result":"PASS","duration":96206711357,"output":""},{"name":"sysext.disable-docker","result":"PASS","duration":96423894668,"output":""},{"name":"cl.cloudinit.basic","result":"PASS","duration":96452706850,"output":""},{"name":"coreos.ignition.systemd.enable-service","result":"PASS","duration":96626110459,"output":""},{"name":"cl.etcd-member.etcdctlv3","result":"PASS","duration":97147572648,"output":" cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-14T22:56:52.959768Z\",\"caller\":\"snapshot/v3_snapshot.go:65\",\"msg\":\"created temporary db file\",\"path\":\"/tmp/tmp.Y2HelhG34a/snapshot.db.part\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-14T22:56:52.960583Z\",\"logger\":\"client\",\"caller\":\"v3@v3.5.18/maintenance.go:212\",\"msg\":\"opened snapshot stream; downloading\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-14T22:56:52.960869Z\",\"caller\":\"snapshot/v3_snapshot.go:73\",\"msg\":\"fetching snapshot\",\"endpoint\":\"127.0.0.1:2379\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-14T22:56:52.964601Z\",\"logger\":\"client\",\"caller\":\"v3@v3.5.18/maintenance.go:220\",\"msg\":\"completed snapshot read; closing\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-14T22:56:52.964665Z\",\"caller\":\"snapshot/v3_snapshot.go:88\",\"msg\":\"fetched snapshot\",\"endpoint\":\"127.0.0.1:2379\",\"size\":\"20 kB\",\"took\":\"now\"}\n cluster.go:125: {\"level\":\"info\",\"ts\":\"2026-04-14T22:56:52.964698Z\",\"caller\":\"snapshot/v3_snapshot.go:97\",\"msg\":\"saved\",\"path\":\"/tmp/tmp.Y2HelhG34a/snapshot.db\"}\n cluster.go:125: Deprecated: Use `etcdutl snapshot status` instead.\n"},{"name":"cl.ignition.v2.xfsroot","result":"PASS","duration":98233838367,"output":""},{"name":"cl.ignition.v1.ext4root","result":"PASS","duration":98548626725,"output":""},{"name":"cl.etcd-member.v2-backup-restore","result":"PASS","duration":99155372021,"output":" cluster.go:125: 2026-04-14T22:56:52Z\tinfo\tetcdutl/backup_command.go:216\tignoring EntryConfChange raft entry\n cluster.go:125: 2026-04-14T22:56:52Z\tinfo\tetcdutl/backup_command.go:231\tignoring member attribute update on\t{\"entry\": \"Term:2 Index:3 Data:\\\"\\\\010\\\\202\\\\344\\\\346\\\\257\\\\343\\\\261\\\\347\\\\366s\\\\022\\\\003PUT\\\\032\u0026/0/members/fd6467cfa69773ed/attributes\\\\\\\"Q{\\\\\\\"name\\\\\\\":\\\\\\\"a5bdd0c20d874bb6b50f1f2e1b20a84c\\\\\\\",\\\\\\\"clientURLs\\\\\\\":[\\\\\\\"http://10.0.0.7:2379\\\\\\\"]}(\\\\0002\\\\0008\\\\000H\\\\000P\\\\000X\\\\000`\\\\000h\\\\000p\\\\000x\\\\000\\\\200\\\\001\\\\000\\\" \", \"v2Req.Path\": \"/0/members/fd6467cfa69773ed/attributes\"}\n cluster.go:125: 2026-04-14T22:56:52Z\tinfo\tetcdutl/backup_command.go:252\tignoring v3 raft entry\n cluster.go:125: 2026-04-14T22:56:52Z\tinfo\tmembership/store.go:141\tTrimming membership information from the backend...\n"},{"name":"cl.basic/CloudConfig","result":"PASS","duration":1995773588,"output":""},{"name":"cl.cloudinit.multipart-mime","result":"PASS","duration":101907354938,"output":""},{"name":"cl.basic/RandomUUID","result":"PASS","duration":1398967915,"output":""},{"name":"cl.ignition.v2.users","result":"PASS","duration":102220502442,"output":""},{"name":"cl.basic/Useradd","result":"PASS","duration":2349972357,"output":""},{"name":"cl.basic/MachineID","result":"PASS","duration":1405744212,"output":""},{"name":"cl.basic/Microcode","result":"PASS","duration":1388589864,"output":""},{"name":"cl.basic/Script","result":"PASS","duration":1523175745,"output":""},{"name":"cl.basic/PortSSH","result":"PASS","duration":1398828736,"output":""},{"name":"cl.basic/DbusPerms","result":"PASS","duration":1452453465,"output":""},{"name":"cl.basic/Symlink","result":"PASS","duration":1395610737,"output":""},{"name":"cl.toolbox.dnf-install","result":"PASS","duration":113776020235,"output":""},{"name":"cl.basic/SymlinkFlatcar","result":"PASS","duration":1395641394,"output":""},{"name":"cl.basic/UpdateEngineKeys","result":"PASS","duration":1366576528,"output":""},{"name":"cl.basic/ServicesActive","result":"PASS","duration":1369201148,"output":""},{"name":"cl.basic/ReadOnly","result":"PASS","duration":1325418523,"output":""},{"name":"cl.basic","result":"PASS","duration":121449629600,"output":" --- PASS: cl.basic/CloudConfig (2.00s)\n --- PASS: cl.basic/RandomUUID (1.40s)\n --- PASS: cl.basic/Useradd (2.35s)\n --- PASS: cl.basic/MachineID (1.41s)\n --- PASS: cl.basic/Microcode (1.39s)\n --- PASS: cl.basic/Script (1.52s)\n --- PASS: cl.basic/PortSSH (1.40s)\n --- PASS: cl.basic/DbusPerms (1.45s)\n --- PASS: cl.basic/Symlink (1.40s)\n --- PASS: cl.basic/SymlinkFlatcar (1.40s)\n --- PASS: cl.basic/UpdateEngineKeys (1.37s)\n --- PASS: cl.basic/ServicesActive (1.37s)\n --- PASS: cl.basic/ReadOnly (1.33s)\n"},{"name":"cl.network.initramfs.second-boot","result":"PASS","duration":123306604440,"output":""},{"name":"cl.ignition.v1.once","result":"PASS","duration":125315235442,"output":""},{"name":"cl.ignition.v1.btrfsroot","result":"PASS","duration":128462789035,"output":""},{"name":"cl.ignition.v2.noop","result":"PASS","duration":95220134025,"output":""},{"name":"coreos.ignition.resource.remote","result":"PASS","duration":98398842210,"output":""},{"name":"cl.ignition.symlink","result":"PASS","duration":95810514480,"output":" cluster.go:152: + readlink /etc/localtime\n"},{"name":"coreos.ignition.resource.local","result":"PASS","duration":198978271082,"output":""},{"name":"docker.btrfs-storage","result":"PASS","duration":102820825254,"output":""},{"name":"coreos.tls.fetch-urls","result":"PASS","duration":105089647263,"output":""},{"name":"docker.selinux","result":"PASS","duration":118608641958,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n cluster.go:125: latest: Pulling from flatcar/busybox\n cluster.go:125: dbc3eadfebd7: Pulling fs layer\n cluster.go:125: dbc3eadfebd7: Verifying Checksum\n cluster.go:125: dbc3eadfebd7: Download complete\n cluster.go:125: dbc3eadfebd7: Pull complete\n cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n cluster.go:125: sh: can't create /opt/hello: Permission denied\n"},{"name":"cl.network.wireguard","result":"PASS","duration":94286783665,"output":" cluster.go:152: + ip --json address show kv0 | jq -r '.[] | .addr_info | .[] | select( .family == \"inet\") | .local'\n"},{"name":"coreos.selinux.boolean","result":"PASS","duration":126204741756,"output":""},{"name":"docker.userns","result":"PASS","duration":107338995263,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B 0.0s done\n cluster.go:125: #1 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context:\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.19MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:474316909933128a631efc47fbddea42edd04d7ac102f49d5e3c5ae2e2d47630 done\n cluster.go:125: #5 naming to docker.io/library/userns-test done\n cluster.go:125: #5 DONE 0.1s\n"},{"name":"coreos.selinux.enforce","result":"PASS","duration":136289807710,"output":""},{"name":"coreos.locksmith.tls","result":"PASS","duration":142450808847,"output":""},{"name":"cl.osreset.ignition-rerun","result":"PASS","duration":136042746563,"output":""},{"name":"cl.swap_activation","result":"PASS","duration":95201488981,"output":""},{"name":"cl.ignition.v1.noop","result":"PASS","duration":94501299689,"output":""},{"name":"sysext.simple","result":"PASS","duration":101173564297,"output":""},{"name":"cl.flannel.vxlan","result":"FAIL","duration":106282507773,"output":" harness.go:646: Cluster failed starting machines: machine \"ci-4628.0.0-n-ec1db4da20\" failed basic checks: some systemd units failed:\n● flanneld.service loaded failed failed flannel - Network fabric for containers (System Application Container)\nstatus: \njournal:-- No entries --\n"},{"name":"cl.network.iptables","result":"PASS","duration":111416515470,"output":" cluster.go:152: + sudo nft --json list ruleset | jq '.nftables[] | select(.rule) | .rule.expr[0].match.right'\n"},{"name":"kubeadm.v1.34.4.flannel.base/node_readiness","result":"PASS","duration":14190431714,"output":""},{"name":"cl.ignition.translation","result":"PASS","duration":96723557000,"output":" cluster.go:152: + ip --json address show kola | jq -r '.[] | .addr_info | .[] | select( .family == \"inet\") | .local'\n cluster.go:152: + cat /etc/systemd/network/00-dummy.network\n"},{"name":"kubeadm.v1.34.4.cilium.base/node_readiness","result":"PASS","duration":14299446721,"output":""},{"name":"kubeadm.v1.34.4.flannel.base/nginx_deployment","result":"PASS","duration":9281038001,"output":""},{"name":"kubeadm.v1.34.4.cilium.base/nginx_deployment","result":"PASS","duration":9248776344,"output":""},{"name":"kubeadm.v1.34.4.flannel.base/NFS_deployment","result":"PASS","duration":18718456350,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.flannel.base","result":"PASS","duration":357305744095,"output":" cluster.go:125: I0414 22:58:35.693402 2817 version.go:260] remote version is much newer: v1.35.3; falling back to: stable-1.34\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n cluster.go:125: I0414 22:58:47.039657 3032 version.go:260] remote version is much newer: v1.35.3; falling back to: stable-1.34\n cluster.go:125: [init] Using Kubernetes version: v1.34.6\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-ad23658ce3\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-ad23658ce3\": lookup ci-4628.0.0-n-ad23658ce3 on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-ad23658ce3 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.24]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 501.732829ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.24:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.947517494s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.189202761s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.502033895s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-ad23658ce3 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-ad23658ce3 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: mug96d.5f75a0qcvkctpmh0\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.24:6443 --token mug96d.5f75a0qcvkctpmh0 \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:5b2adc05d5bcde02b676e75f62f38a26260110c8bf79b9bd09fd7744fba7a4ae \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W0414 23:00:27.689317 2415 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.34.4.flannel.base/node_readiness (14.19s)\n --- PASS: kubeadm.v1.34.4.flannel.base/nginx_deployment (9.28s)\n --- PASS: kubeadm.v1.34.4.flannel.base/NFS_deployment (18.72s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"docker.network-openbsd-nc","result":"PASS","duration":127882927969,"output":" docker.go:413: creating netcat containers\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B 0.0s done\n cluster.go:125: #1 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.46MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:7b5adeaa7bdc0e9a983566240c2a0f8889ccec895d422d6050160050750102ac done\n cluster.go:125: #5 naming to docker.io/library/netcat 0.0s done\n cluster.go:125: #5 DONE 0.1s\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B 0.0s done\n cluster.go:125: #1 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.46MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:9ab945b036257ac53cc2dfa503ceecf781a155b2d2377f246dd8d9bd380fa5ba done\n cluster.go:125: #5 naming to docker.io/library/netcat done\n cluster.go:125: #5 DONE 0.1s\n"},{"name":"kubeadm.v1.34.4.cilium.base/NFS_deployment","result":"PASS","duration":19049315466,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"bpf.ig/ig","result":"PASS","duration":111833541288,"output":" cluster.go:125: + sudo ig run trace_exec:v0.50.0 --help\n cluster.go:125: time=\"2026-04-14T23:01:11Z\" level=warning msg=\"Runtime enricher (docker): couldn't get current containers: listing containers with options {Size:false All:true Latest:false Since: Before: Limit:0 Filters:{fields:map[]}}: Get \\\"http://%2Frun%2Fdocker.sock/v1.51/containers/json?all=1\\\": context deadline exceeded (Client.Timeout exceeded while awaiting headers)\"\n cluster.go:125: + trap 'kill %%' ERR\n cluster.go:125: + timeout 30 grep -F -m1 running...\n cluster.go:125: + sudo ig run trace_exec:v0.50.0 --host --filter proc.comm=docker,args~ps --output json --verbose\n cluster.go:125: + docker info\n cluster.go:125: + docker ps\n cluster.go:125: + docker images\n cluster.go:125: + kill %%\n cluster.go:125: + wait\n cluster.go:125: + jq -s -e '.[] | select(.args == \"/usr/bin/docker\\u00a0ps\")' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.args == \"/usr/bin/docker\\u00a0info\"))' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.args == \"/usr/bin/docker\\u00a0images\"))' ig.json\n cluster.go:125: + sudo ig run trace_dns:v0.50.0 --help\n cluster.go:125: + trap 'kill %%' ERR\n cluster.go:125: + timeout 30 grep -F -m1 running...\n cluster.go:125: + sudo ig run trace_dns:v0.50.0 --host --filter name=flatcar.org. --output json --verbose\n cluster.go:125: + dig kinvolk.io\n cluster.go:125: + dig flatcar.org\n cluster.go:125: + dig stable.release.flatcar-linux.net\n cluster.go:125: + kill %%\n cluster.go:125: + wait\n cluster.go:125: + jq -s -e '.[] | select(.name == \"flatcar.org.\")' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.name == \"kinvolk.io.\"))' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.name == \"stable.release.flatcar-linux.net.\"))' ig.json\n"},{"name":"bpf.ig","result":"PASS","duration":114778126940,"output":" --- PASS: bpf.ig/ig (111.83s)\n cluster.go:125: + sudo ig run trace_exec:v0.50.0 --help\n cluster.go:125: time=\"2026-04-14T23:01:11Z\" level=warning msg=\"Runtime enricher (docker): couldn't get current containers: listing containers with options {Size:false All:true Latest:false Since: Before: Limit:0 Filters:{fields:map[]}}: Get \\\"http://%2Frun%2Fdocker.sock/v1.51/containers/json?all=1\\\": context deadline exceeded (Client.Timeout exceeded while awaiting headers)\"\n cluster.go:125: + trap 'kill %%' ERR\n cluster.go:125: + timeout 30 grep -F -m1 running...\n cluster.go:125: + sudo ig run trace_exec:v0.50.0 --host --filter proc.comm=docker,args~ps --output json --verbose\n cluster.go:125: + docker info\n cluster.go:125: + docker ps\n cluster.go:125: + docker images\n cluster.go:125: + kill %%\n cluster.go:125: + wait\n cluster.go:125: + jq -s -e '.[] | select(.args == \"/usr/bin/docker\\u00a0ps\")' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.args == \"/usr/bin/docker\\u00a0info\"))' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.args == \"/usr/bin/docker\\u00a0images\"))' ig.json\n cluster.go:125: + sudo ig run trace_dns:v0.50.0 --help\n cluster.go:125: + trap 'kill %%' ERR\n cluster.go:125: + timeout 30 grep -F -m1 running...\n cluster.go:125: + sudo ig run trace_dns:v0.50.0 --host --filter name=flatcar.org. --output json --verbose\n cluster.go:125: + dig kinvolk.io\n cluster.go:125: + dig flatcar.org\n cluster.go:125: + dig stable.release.flatcar-linux.net\n cluster.go:125: + kill %%\n cluster.go:125: + wait\n cluster.go:125: + jq -s -e '.[] | select(.name == \"flatcar.org.\")' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.name == \"kinvolk.io.\"))' ig.json\n cluster.go:125: + jq -s -e 'isempty(.[] | select(.name == \"stable.release.flatcar-linux.net.\"))' ig.json\n"},{"name":"systemd.sysusers.gshadow","result":"PASS","duration":68235590930,"output":""},{"name":"docker.enable-service.sysext","result":"PASS","duration":93722127515,"output":" cluster.go:152: + systemctl is-enabled docker\n"},{"name":"kubeadm.v1.34.4.cilium.base/IPSec_encryption","result":"PASS","duration":19723324133,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"cl.ignition.v2.btrfsroot","result":"PASS","duration":159911145529,"output":""},{"name":"kubeadm.v1.34.4.cilium.base","result":"PASS","duration":385431977167,"output":" cluster.go:125: I0414 22:58:43.183017 2887 version.go:260] remote version is much newer: v1.35.3; falling back to: stable-1.34\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n cluster.go:125: I0414 22:58:53.427618 3104 version.go:260] remote version is much newer: v1.35.3; falling back to: stable-1.34\n cluster.go:125: [init] Using Kubernetes version: v1.34.6\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-4113b56122\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-4113b56122\": lookup ci-4628.0.0-n-4113b56122 on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-4113b56122 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.26]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.001649275s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.26:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.196415781s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.095976418s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 3.001954891s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-4113b56122 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-4113b56122 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: nbdmkk.9nigntecfmvxk66c\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.26:6443 --token nbdmkk.9nigntecfmvxk66c \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:365091ecef49b3ba69b2f0c59423ea5a606a1aad0d81dab33de7c2d5dcd976f7 \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: Deployment cilium-operator \n cluster.go:125: DaemonSet cilium \n cluster.go:125: Containers: cilium \n cluster.go:125: cilium-operator \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W0414 23:00:35.705550 2564 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.34.4.cilium.base/node_readiness (14.30s)\n --- PASS: kubeadm.v1.34.4.cilium.base/nginx_deployment (9.25s)\n --- PASS: kubeadm.v1.34.4.cilium.base/NFS_deployment (19.05s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.34.4.cilium.base/IPSec_encryption (19.72s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"cl.ignition.v1.xfsroot","result":"PASS","duration":96884350605,"output":""},{"name":"coreos.ignition.security.tls","result":"PASS","duration":199711625438,"output":""},{"name":"kubeadm.v1.33.8.calico.base/node_readiness","result":"PASS","duration":33613210270,"output":""},{"name":"kubeadm.v1.33.8.calico.base/nginx_deployment","result":"PASS","duration":9259120586,"output":""},{"name":"cl.ignition.v2_1.ext4checkexisting","result":"PASS","duration":157097279163,"output":""},{"name":"docker.lib-coreos-dockerd-compat/docker-info","result":"PASS","duration":3942874185,"output":""},{"name":"cl.overlay.cleanup","result":"PASS","duration":131671512022,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/node_readiness","result":"PASS","duration":20669488410,"output":""},{"name":"cl.users.shells","result":"PASS","duration":80827233929,"output":""},{"name":"docker.lib-coreos-dockerd-compat/resources","result":"PASS","duration":17184119863,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B 0.0s done\n cluster.go:125: #1 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.12MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:b913d7b5e3b9ddcac06278aa2c9ad2cda72741ab1d451eefb23c510db0676583\n cluster.go:125: #5 writing image sha256:b913d7b5e3b9ddcac06278aa2c9ad2cda72741ab1d451eefb23c510db0676583 done\n cluster.go:125: #5 naming to docker.io/library/sleep done\n cluster.go:125: #5 DONE 0.1s\n cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n"},{"name":"cl.etcd-member.discovery","result":"PASS","duration":135276052194,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/nginx_deployment","result":"PASS","duration":9289511398,"output":""},{"name":"kubeadm.v1.33.8.calico.base/NFS_deployment","result":"PASS","duration":32046598121,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.33.8.calico.base","result":"PASS","duration":451986789929,"output":" cluster.go:125: I0414 22:58:37.388658 2770 version.go:261] remote version is much newer: v1.35.3; falling back to: stable-1.33\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0\n cluster.go:125: I0414 22:58:51.393314 2999 version.go:261] remote version is much newer: v1.35.3; falling back to: stable-1.33\n cluster.go:125: [init] Using Kubernetes version: v1.33.10\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-7480adaadd\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-7480adaadd\": lookup ci-4628.0.0-n-7480adaadd on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-7480adaadd kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.25]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 501.343754ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.25:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 3.514144302s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.762348157s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.501498277s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-7480adaadd as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-7480adaadd as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: 7dzqca.kkt00t74effemagm\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.25:6443 --token 7dzqca.kkt00t74effemagm \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:1d7c0680f263737f0612b70a48a0a3f7b9860331a65710d020d672a1c528eabf \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W0414 23:01:20.721794 2544 joinconfiguration.go:113] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.33.8.calico.base/node_readiness (33.61s)\n --- PASS: kubeadm.v1.33.8.calico.base/nginx_deployment (9.26s)\n --- PASS: kubeadm.v1.33.8.calico.base/NFS_deployment (32.05s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.calico.base/node_readiness","result":"PASS","duration":20777901796,"output":""},{"name":"cl.ignition.v1.groups","result":"PASS","duration":69429126881,"output":""},{"name":"kubeadm.v1.35.1.calico.base/nginx_deployment","result":"PASS","duration":9336434798,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/NFS_deployment","result":"PASS","duration":19115875738,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.ignition.v2_1.vfat","result":"PASS","duration":96174937287,"output":""},{"name":"kubeadm.v1.33.8.cilium.base/node_readiness","result":"PASS","duration":33666099473,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/IPSec_encryption","result":"PASS","duration":19898008218,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.35.1.cilium.base","result":"PASS","duration":388551423636,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: [init] Using Kubernetes version: v1.35.3\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-e0eac1afad\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-e0eac1afad\": lookup ci-4628.0.0-n-e0eac1afad on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-e0eac1afad kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.19]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 500.95263ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.19:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.506551135s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 1.606176977s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 3.501604506s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-e0eac1afad as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-e0eac1afad as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: kzssxo.ow1g8ftkak0bs8x2\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.19:6443 --token kzssxo.ow1g8ftkak0bs8x2 \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:36284650cb4c4ed7c74eb1b2c921d494643e4061781a371f1f7ecb710340ac0a \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: DaemonSet cilium \n cluster.go:125: Deployment cilium-operator \n cluster.go:125: Containers: cilium-operator \n cluster.go:125: cilium \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W0414 23:02:10.434052 2519 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.cilium.base/node_readiness (20.67s)\n --- PASS: kubeadm.v1.35.1.cilium.base/nginx_deployment (9.29s)\n --- PASS: kubeadm.v1.35.1.cilium.base/NFS_deployment (19.12s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.35.1.cilium.base/IPSec_encryption (19.90s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.33.8.cilium.base/nginx_deployment","result":"PASS","duration":9279516762,"output":""},{"name":"kubeadm.v1.35.1.calico.base/NFS_deployment","result":"PASS","duration":31976861414,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.calico.base","result":"PASS","duration":395558287776,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: [init] Using Kubernetes version: v1.35.3\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-931f99189c\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-931f99189c\": lookup ci-4628.0.0-n-931f99189c on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-931f99189c kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.30]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 501.696028ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.30:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 1.498403067s\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 1.506078791s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 3.501107725s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-931f99189c as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-931f99189c as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: fk2iqo.8lk4yx84mk6d3zpg\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.30:6443 --token fk2iqo.8lk4yx84mk6d3zpg \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:93fd0a60c34413cdf2ce8a1d1c264a381d6d16c63a63dc252f231f3bfcae903e \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W0414 23:02:28.147588 2515 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.calico.base/node_readiness (20.78s)\n --- PASS: kubeadm.v1.35.1.calico.base/nginx_deployment (9.34s)\n --- PASS: kubeadm.v1.35.1.calico.base/NFS_deployment (31.98s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.update.badverity","result":"PASS","duration":497968573321,"output":""},{"name":"cl.network.nftables","result":"PASS","duration":62954057933,"output":" cluster.go:152: + sudo nft --json list ruleset | jq '.nftables[] | select(.rule) | .rule.expr[0].match.right'\n"},{"name":"coreos.ignition.once","result":"PASS","duration":125304374343,"output":""},{"name":"kubeadm.v1.33.8.cilium.base/NFS_deployment","result":"PASS","duration":19137497851,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"sysext.disable-containerd","result":"PASS","duration":94761100522,"output":""},{"name":"cl.ignition.v2_1.swap","result":"PASS","duration":95793219345,"output":""},{"name":"cl.ignition.kargs","result":"PASS","duration":124339316654,"output":" cluster.go:152: + cat /proc/cmdline\n"},{"name":"kubeadm.v1.33.8.cilium.base/IPSec_encryption","result":"PASS","duration":19770517584,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.33.8.cilium.base","result":"PASS","duration":407444455560,"output":" cluster.go:125: I0414 23:00:45.813618 2915 version.go:261] remote version is much newer: v1.35.3; falling back to: stable-1.33\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0\n cluster.go:125: I0414 23:00:59.573348 3146 version.go:261] remote version is much newer: v1.35.3; falling back to: stable-1.33\n cluster.go:125: [init] Using Kubernetes version: v1.33.10\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-b4a8baab19\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-b4a8baab19\": lookup ci-4628.0.0-n-b4a8baab19 on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-b4a8baab19 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.14]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.501301504s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.14:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 3.777180942s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 4.004351723s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.501091676s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-b4a8baab19 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-b4a8baab19 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: 5s8ej9.gqm1qaqd6mwqx6tc\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.14:6443 --token 5s8ej9.gqm1qaqd6mwqx6tc \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:1da25fb67ab5ab605553967012620291f10ef2bb80c163b2f8bc310fca0fa9c2 \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: DaemonSet cilium \n cluster.go:125: Deployment cilium-operator \n cluster.go:125: Containers: cilium-operator \n cluster.go:125: cilium \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W0414 23:02:43.420236 2511 joinconfiguration.go:113] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.33.8.cilium.base/node_readiness (33.67s)\n --- PASS: kubeadm.v1.33.8.cilium.base/nginx_deployment (9.28s)\n --- PASS: kubeadm.v1.33.8.cilium.base/NFS_deployment (19.14s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.33.8.cilium.base/IPSec_encryption (19.77s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"docker.base/docker-info","result":"PASS","duration":9966837877,"output":""},{"name":"systemd.journal.user","result":"PASS","duration":94074648295,"output":""},{"name":"cl.ignition.misc.empty","result":"PASS","duration":63697946099,"output":""},{"name":"cl.internet/UpdateEngine","result":"PASS","duration":1436808181,"output":""},{"name":"docker.base/resources","result":"PASS","duration":15810466544,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B 0.0s done\n cluster.go:125: #1 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.12MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:55f697741e06adb2729f8aec5203a59119dee4adb84530401f164b9a88ae8629 done\n cluster.go:125: #5 naming to docker.io/library/sleep done\n cluster.go:125: #5 DONE 0.1s\n cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n"},{"name":"sysext.custom-docker.sysext","result":"PASS","duration":175103892916,"output":" cluster.go:125: bash: line 1: docker: command not found\n cluster.go:125: Cloning into 'sysext-bakery'...\n cluster.go:125: Note: switching to '9850ffd5b2353f45a9b3bf4fb84f8138a149e3e7'.\n cluster.go:125: \n cluster.go:125: You are in 'detached HEAD' state. You can look around, make experimental\n cluster.go:125: changes and commit them, and you can discard any commits you make in this\n cluster.go:125: state without impacting any branches by switching back to a branch.\n cluster.go:125: \n cluster.go:125: If you want to create a new branch to retain commits you create, you may\n cluster.go:125: do so (now or later) by using -c with the switch command. Example:\n cluster.go:125: \n cluster.go:125: git switch -c \u003cnew-branch-name\u003e\n cluster.go:125: \n cluster.go:125: Or undo this operation with:\n cluster.go:125: \n cluster.go:125: git switch -\n cluster.go:125: \n cluster.go:125: Turn off this advice by setting config variable advice.detachedHead to false\n cluster.go:125: \n cluster.go:125: HEAD is now at 9850ffd Merge pull request #31 from flatcar/t-lo/fix-docker-23-containerd-shim\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n cluster.go:125: latest: Pulling from flatcar/busybox\n cluster.go:125: dbc3eadfebd7: Pulling fs layer\n cluster.go:125: dbc3eadfebd7: Verifying Checksum\n cluster.go:125: dbc3eadfebd7: Download complete\n cluster.go:125: dbc3eadfebd7: Pull complete\n cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: mke2fs 1.47.3 (8-Jul-2025)\n cluster.go:125: resize2fs 1.47.3 (8-Jul-2025)\n"},{"name":"cl.internet/DockerPing","result":"PASS","duration":17761338482,"output":""},{"name":"cl.ignition.v1.users","result":"PASS","duration":72452745032,"output":""},{"name":"coreos.ignition.groups","result":"PASS","duration":72269724223,"output":""},{"name":"cl.update.reboot","result":"PASS","duration":195112653518,"output":""},{"name":"cl.internet/DockerEcho","result":"PASS","duration":1738235720,"output":""},{"name":"cl.internet/NTPDate","result":"PASS","duration":8138185954,"output":""},{"name":"docker.lib-coreos-dockerd-compat/networks-reliably","result":"PASS","duration":141803515162,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 4.09MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:d0cec334445744ad8bb0cc43b2fc2b5d2e721c6e5ad954ab242ca52598883271\n cluster.go:125: #5 writing image sha256:d0cec334445744ad8bb0cc43b2fc2b5d2e721c6e5ad954ab242ca52598883271 done\n cluster.go:125: #5 naming to docker.io/library/ping 0.0s done\n cluster.go:125: #5 DONE 0.1s\n"},{"name":"cl.internet","result":"PASS","duration":129964396297,"output":" --- PASS: cl.internet/UpdateEngine (1.44s)\n --- PASS: cl.internet/DockerPing (17.76s)\n --- PASS: cl.internet/DockerEcho (1.74s)\n --- PASS: cl.internet/NTPDate (8.14s)\n"},{"name":"cl.metadata.azure","result":"PASS","duration":63781486846,"output":""},{"name":"docker.lib-coreos-dockerd-compat/user-no-caps","result":"PASS","duration":3815991773,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 5.15MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:777ae362b19b07c39e682fc16e365f677a07f9d38a6f82da28dd51fac7bba2e5 done\n cluster.go:125: #5 naming to docker.io/library/captest done\n cluster.go:125: #5 DONE 0.1s\n"},{"name":"kubeadm.v1.33.8.flannel.base/node_readiness","result":"PASS","duration":14225260152,"output":""},{"name":"docker.lib-coreos-dockerd-compat/ownership","result":"PASS","duration":8454273712,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n cluster.go:125: latest: Pulling from flatcar/nginx\n cluster.go:125: f704f61efc9c: Pulling fs layer\n cluster.go:125: a1eae9f5b3f3: Pulling fs layer\n cluster.go:125: b91cc56ccc4f: Pulling fs layer\n cluster.go:125: 44eaefe7f5ca: Pulling fs layer\n cluster.go:125: 9c0f97895f78: Pulling fs layer\n cluster.go:125: 8b4d97d25516: Pulling fs layer\n cluster.go:125: 5f961e328469: Pulling fs layer\n cluster.go:125: 9c0f97895f78: Waiting\n cluster.go:125: 8b4d97d25516: Waiting\n cluster.go:125: 5f961e328469: Waiting\n cluster.go:125: 44eaefe7f5ca: Waiting\n cluster.go:125: b91cc56ccc4f: Verifying Checksum\n cluster.go:125: b91cc56ccc4f: Download complete\n cluster.go:125: 44eaefe7f5ca: Verifying Checksum\n cluster.go:125: 44eaefe7f5ca: Download complete\n cluster.go:125: f704f61efc9c: Verifying Checksum\n cluster.go:125: f704f61efc9c: Download complete\n cluster.go:125: 9c0f97895f78: Verifying Checksum\n cluster.go:125: 9c0f97895f78: Download complete\n cluster.go:125: 8b4d97d25516: Verifying Checksum\n cluster.go:125: 8b4d97d25516: Download complete\n cluster.go:125: a1eae9f5b3f3: Verifying Checksum\n cluster.go:125: a1eae9f5b3f3: Download complete\n cluster.go:125: 5f961e328469: Verifying Checksum\n cluster.go:125: 5f961e328469: Download complete\n cluster.go:125: f704f61efc9c: Pull complete\n cluster.go:125: a1eae9f5b3f3: Pull complete\n cluster.go:125: b91cc56ccc4f: Pull complete\n cluster.go:125: 44eaefe7f5ca: Pull complete\n cluster.go:125: 9c0f97895f78: Pull complete\n cluster.go:125: 8b4d97d25516: Pull complete\n cluster.go:125: 5f961e328469: Pull complete\n cluster.go:125: Digest: sha256:37746262896e4e1a260f21898a0759befa3e3bc64a33bd95f7cd1b8400a9b03b\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"docker.lib-coreos-dockerd-compat","result":"PASS","duration":238159118143,"output":" --- PASS: docker.lib-coreos-dockerd-compat/docker-info (3.94s)\n --- PASS: docker.lib-coreos-dockerd-compat/resources (17.18s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B 0.0s done\n cluster.go:125: #1 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.12MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:b913d7b5e3b9ddcac06278aa2c9ad2cda72741ab1d451eefb23c510db0676583\n cluster.go:125: #5 writing image sha256:b913d7b5e3b9ddcac06278aa2c9ad2cda72741ab1d451eefb23c510db0676583 done\n cluster.go:125: #5 naming to docker.io/library/sleep done\n cluster.go:125: #5 DONE 0.1s\n cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n --- PASS: docker.lib-coreos-dockerd-compat/networks-reliably (141.80s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 4.09MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:d0cec334445744ad8bb0cc43b2fc2b5d2e721c6e5ad954ab242ca52598883271\n cluster.go:125: #5 writing image sha256:d0cec334445744ad8bb0cc43b2fc2b5d2e721c6e5ad954ab242ca52598883271 done\n cluster.go:125: #5 naming to docker.io/library/ping 0.0s done\n cluster.go:125: #5 DONE 0.1s\n --- PASS: docker.lib-coreos-dockerd-compat/user-no-caps (3.82s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 5.15MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:777ae362b19b07c39e682fc16e365f677a07f9d38a6f82da28dd51fac7bba2e5 done\n cluster.go:125: #5 naming to docker.io/library/captest done\n cluster.go:125: #5 DONE 0.1s\n --- PASS: docker.lib-coreos-dockerd-compat/ownership (8.45s)\n cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n cluster.go:125: latest: Pulling from flatcar/nginx\n cluster.go:125: f704f61efc9c: Pulling fs layer\n cluster.go:125: a1eae9f5b3f3: Pulling fs layer\n cluster.go:125: b91cc56ccc4f: Pulling fs layer\n cluster.go:125: 44eaefe7f5ca: Pulling fs layer\n cluster.go:125: 9c0f97895f78: Pulling fs layer\n cluster.go:125: 8b4d97d25516: Pulling fs layer\n cluster.go:125: 5f961e328469: Pulling fs layer\n cluster.go:125: 9c0f97895f78: Waiting\n cluster.go:125: 8b4d97d25516: Waiting\n cluster.go:125: 5f961e328469: Waiting\n cluster.go:125: 44eaefe7f5ca: Waiting\n cluster.go:125: b91cc56ccc4f: Verifying Checksum\n cluster.go:125: b91cc56ccc4f: Download complete\n cluster.go:125: 44eaefe7f5ca: Verifying Checksum\n cluster.go:125: 44eaefe7f5ca: Download complete\n cluster.go:125: f704f61efc9c: Verifying Checksum\n cluster.go:125: f704f61efc9c: Download complete\n cluster.go:125: 9c0f97895f78: Verifying Checksum\n cluster.go:125: 9c0f97895f78: Download complete\n cluster.go:125: 8b4d97d25516: Verifying Checksum\n cluster.go:125: 8b4d97d25516: Download complete\n cluster.go:125: a1eae9f5b3f3: Verifying Checksum\n cluster.go:125: a1eae9f5b3f3: Download complete\n cluster.go:125: 5f961e328469: Verifying Checksum\n cluster.go:125: 5f961e328469: Download complete\n cluster.go:125: f704f61efc9c: Pull complete\n cluster.go:125: a1eae9f5b3f3: Pull complete\n cluster.go:125: b91cc56ccc4f: Pull complete\n cluster.go:125: 44eaefe7f5ca: Pull complete\n cluster.go:125: 9c0f97895f78: Pull complete\n cluster.go:125: 8b4d97d25516: Pull complete\n cluster.go:125: 5f961e328469: Pull complete\n cluster.go:125: Digest: sha256:37746262896e4e1a260f21898a0759befa3e3bc64a33bd95f7cd1b8400a9b03b\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"kubeadm.v1.33.8.flannel.base/nginx_deployment","result":"PASS","duration":9251223460,"output":""},{"name":"cl.ignition.v2.ext4root","result":"PASS","duration":70083731387,"output":""},{"name":"cl.cloudinit.script","result":"PASS","duration":95029459403,"output":""},{"name":"cl.ignition.luks","result":"PASS","duration":99492500702,"output":""},{"name":"coreos.ignition.ssh.key","result":"PASS","duration":65661721939,"output":""},{"name":"kubeadm.v1.33.8.flannel.base/NFS_deployment","result":"PASS","duration":18985891642,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.33.8.flannel.base","result":"PASS","duration":409597723321,"output":" cluster.go:125: I0414 23:02:57.641554 2845 version.go:261] remote version is much newer: v1.35.3; falling back to: stable-1.33\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0\n cluster.go:125: I0414 23:03:11.050848 3060 version.go:261] remote version is much newer: v1.35.3; falling back to: stable-1.33\n cluster.go:125: [init] Using Kubernetes version: v1.33.10\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-4f79765740\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-4f79765740\": lookup ci-4628.0.0-n-4f79765740 on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-4f79765740 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.37]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.001488555s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.37:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 3.755667345s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.869440932s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.501879975s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-4f79765740 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-4f79765740 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: kd7w7h.c9ik0agcp0udfm3i\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.37:6443 --token kd7w7h.c9ik0agcp0udfm3i \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:44dc9fba7e2968ea671493fb6dbdcb555ef58531838f51aa5c9e212a8b81ffd2 \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W0414 23:04:53.051888 2528 joinconfiguration.go:113] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.33.8.flannel.base/node_readiness (14.23s)\n --- PASS: kubeadm.v1.33.8.flannel.base/nginx_deployment (9.25s)\n --- PASS: kubeadm.v1.33.8.flannel.base/NFS_deployment (18.99s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:122): Cannot iterate over null (null)\n"},{"name":"coreos.locksmith.reboot","result":"PASS","duration":417139485097,"output":""},{"name":"kubeadm.v1.34.4.calico.base/node_readiness","result":"PASS","duration":27227246588,"output":""},{"name":"docker.containerd-restart","result":"PASS","duration":174843862184,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n cluster.go:125: latest: Pulling from flatcar/busybox\n cluster.go:125: dbc3eadfebd7: Pulling fs layer\n cluster.go:125: dbc3eadfebd7: Verifying Checksum\n cluster.go:125: dbc3eadfebd7: Download complete\n cluster.go:125: dbc3eadfebd7: Pull complete\n cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n"},{"name":"kubeadm.v1.34.4.calico.base/nginx_deployment","result":"PASS","duration":9408159177,"output":""},{"name":"docker.base/networks-reliably","result":"PASS","duration":142946336646,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 4.09MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:472f2341b65228468e0da32d4665809a242926185a3fe84350ca60a347ff1b45\n cluster.go:125: #5 writing image sha256:472f2341b65228468e0da32d4665809a242926185a3fe84350ca60a347ff1b45 done\n cluster.go:125: #5 naming to docker.io/library/ping 0.0s done\n cluster.go:125: #5 DONE 0.1s\n"},{"name":"docker.base/user-no-caps","result":"PASS","duration":3794126350,"output":" cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 5.15MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:83fc63b47baccd3e3bed1f96aac06be66ad644136c72b19090f1332880bc02ea done\n cluster.go:125: #5 naming to docker.io/library/captest done\n cluster.go:125: #5 DONE 0.1s\n"},{"name":"cl.verity/verify","result":"PASS","duration":88415328417,"output":" cluster.go:125: Success\n"},{"name":"docker.base/ownership","result":"PASS","duration":8136189225,"output":" cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n cluster.go:125: latest: Pulling from flatcar/nginx\n cluster.go:125: f704f61efc9c: Pulling fs layer\n cluster.go:125: a1eae9f5b3f3: Pulling fs layer\n cluster.go:125: b91cc56ccc4f: Pulling fs layer\n cluster.go:125: 44eaefe7f5ca: Pulling fs layer\n cluster.go:125: 9c0f97895f78: Pulling fs layer\n cluster.go:125: 8b4d97d25516: Pulling fs layer\n cluster.go:125: 5f961e328469: Pulling fs layer\n cluster.go:125: 44eaefe7f5ca: Waiting\n cluster.go:125: 9c0f97895f78: Waiting\n cluster.go:125: 8b4d97d25516: Waiting\n cluster.go:125: 5f961e328469: Waiting\n cluster.go:125: f704f61efc9c: Verifying Checksum\n cluster.go:125: f704f61efc9c: Download complete\n cluster.go:125: a1eae9f5b3f3: Verifying Checksum\n cluster.go:125: a1eae9f5b3f3: Download complete\n cluster.go:125: b91cc56ccc4f: Verifying Checksum\n cluster.go:125: b91cc56ccc4f: Download complete\n cluster.go:125: 44eaefe7f5ca: Verifying Checksum\n cluster.go:125: 44eaefe7f5ca: Download complete\n cluster.go:125: 9c0f97895f78: Verifying Checksum\n cluster.go:125: 9c0f97895f78: Download complete\n cluster.go:125: 8b4d97d25516: Verifying Checksum\n cluster.go:125: 8b4d97d25516: Download complete\n cluster.go:125: 5f961e328469: Verifying Checksum\n cluster.go:125: 5f961e328469: Download complete\n cluster.go:125: f704f61efc9c: Pull complete\n cluster.go:125: a1eae9f5b3f3: Pull complete\n cluster.go:125: b91cc56ccc4f: Pull complete\n cluster.go:125: 44eaefe7f5ca: Pull complete\n cluster.go:125: 9c0f97895f78: Pull complete\n cluster.go:125: 8b4d97d25516: Pull complete\n cluster.go:125: 5f961e328469: Pull complete\n cluster.go:125: Digest: sha256:37746262896e4e1a260f21898a0759befa3e3bc64a33bd95f7cd1b8400a9b03b\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"docker.base","result":"PASS","duration":275305464943,"output":" --- PASS: docker.base/docker-info (9.97s)\n --- PASS: docker.base/resources (15.81s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B 0.0s done\n cluster.go:125: #1 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.12MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:55f697741e06adb2729f8aec5203a59119dee4adb84530401f164b9a88ae8629 done\n cluster.go:125: #5 naming to docker.io/library/sleep done\n cluster.go:125: #5 DONE 0.1s\n cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n --- PASS: docker.base/networks-reliably (142.95s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 4.09MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:472f2341b65228468e0da32d4665809a242926185a3fe84350ca60a347ff1b45\n cluster.go:125: #5 writing image sha256:472f2341b65228468e0da32d4665809a242926185a3fe84350ca60a347ff1b45 done\n cluster.go:125: #5 naming to docker.io/library/ping 0.0s done\n cluster.go:125: #5 DONE 0.1s\n --- PASS: docker.base/user-no-caps (3.79s)\n cluster.go:125: #0 building with \"default\" instance using docker driver\n cluster.go:125: \n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 5.15MB 0.0s done\n cluster.go:125: #3 DONE 0.1s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.1s done\n cluster.go:125: #5 writing image sha256:83fc63b47baccd3e3bed1f96aac06be66ad644136c72b19090f1332880bc02ea done\n cluster.go:125: #5 naming to docker.io/library/captest done\n cluster.go:125: #5 DONE 0.1s\n --- PASS: docker.base/ownership (8.14s)\n cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n cluster.go:125: latest: Pulling from flatcar/nginx\n cluster.go:125: f704f61efc9c: Pulling fs layer\n cluster.go:125: a1eae9f5b3f3: Pulling fs layer\n cluster.go:125: b91cc56ccc4f: Pulling fs layer\n cluster.go:125: 44eaefe7f5ca: Pulling fs layer\n cluster.go:125: 9c0f97895f78: Pulling fs layer\n cluster.go:125: 8b4d97d25516: Pulling fs layer\n cluster.go:125: 5f961e328469: Pulling fs layer\n cluster.go:125: 44eaefe7f5ca: Waiting\n cluster.go:125: 9c0f97895f78: Waiting\n cluster.go:125: 8b4d97d25516: Waiting\n cluster.go:125: 5f961e328469: Waiting\n cluster.go:125: f704f61efc9c: Verifying Checksum\n cluster.go:125: f704f61efc9c: Download complete\n cluster.go:125: a1eae9f5b3f3: Verifying Checksum\n cluster.go:125: a1eae9f5b3f3: Download complete\n cluster.go:125: b91cc56ccc4f: Verifying Checksum\n cluster.go:125: b91cc56ccc4f: Download complete\n cluster.go:125: 44eaefe7f5ca: Verifying Checksum\n cluster.go:125: 44eaefe7f5ca: Download complete\n cluster.go:125: 9c0f97895f78: Verifying Checksum\n cluster.go:125: 9c0f97895f78: Download complete\n cluster.go:125: 8b4d97d25516: Verifying Checksum\n cluster.go:125: 8b4d97d25516: Download complete\n cluster.go:125: 5f961e328469: Verifying Checksum\n cluster.go:125: 5f961e328469: Download complete\n cluster.go:125: f704f61efc9c: Pull complete\n cluster.go:125: a1eae9f5b3f3: Pull complete\n cluster.go:125: b91cc56ccc4f: Pull complete\n cluster.go:125: 44eaefe7f5ca: Pull complete\n cluster.go:125: 9c0f97895f78: Pull complete\n cluster.go:125: 8b4d97d25516: Pull complete\n cluster.go:125: 5f961e328469: Pull complete\n cluster.go:125: Digest: sha256:37746262896e4e1a260f21898a0759befa3e3bc64a33bd95f7cd1b8400a9b03b\n cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"kubeadm.v1.34.4.calico.base/NFS_deployment","result":"PASS","duration":31995092221,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.calico.base","result":"PASS","duration":404930883694,"output":" cluster.go:125: I0414 23:04:09.485731 2884 version.go:260] remote version is much newer: v1.35.3; falling back to: stable-1.34\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n cluster.go:125: I0414 23:04:20.864264 3099 version.go:260] remote version is much newer: v1.35.3; falling back to: stable-1.34\n cluster.go:125: [init] Using Kubernetes version: v1.34.6\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-570c51de4c\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-570c51de4c\": lookup ci-4628.0.0-n-570c51de4c on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-570c51de4c kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.15]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.001491536s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.15:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.249563037s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.446482995s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 4.501984347s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-570c51de4c as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-570c51de4c as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: tqf3o2.xkk3t6s1d9rfgewm\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.15:6443 --token tqf3o2.xkk3t6s1d9rfgewm \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:704ba82978cb361774e7f6039178748ec8a59f7db1401d7bf308b858db90fb3e \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W0414 23:06:17.911437 2511 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.34.4.calico.base/node_readiness (27.23s)\n --- PASS: kubeadm.v1.34.4.calico.base/nginx_deployment (9.41s)\n --- PASS: kubeadm.v1.34.4.calico.base/NFS_deployment (32.00s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.flannel.base/node_readiness","result":"PASS","duration":7867407233,"output":""},{"name":"kubeadm.v1.35.1.flannel.base/nginx_deployment","result":"PASS","duration":22042224657,"output":""},{"name":"kubeadm.v1.35.1.flannel.base/NFS_deployment","result":"PASS","duration":18926194738,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.flannel.base","result":"PASS","duration":388622609255,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.3\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: [init] Using Kubernetes version: v1.35.3\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-357f4c9372\" could not be reached\n cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4628.0.0-n-357f4c9372\": lookup ci-4628.0.0-n-357f4c9372 on 168.63.129.16:53: no such host\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4628.0.0-n-357f4c9372 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.19]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 502.140371ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.19:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.50568134s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.66413289s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 4.501496621s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-357f4c9372 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node ci-4628.0.0-n-357f4c9372 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: 6vf66a.3j7jt7sysamywipx\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 10.0.0.19:6443 --token 6vf66a.3j7jt7sysamywipx \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:c395645b7bfec6cf010ed5342dea66ce6c476467e6020e92f18da0f45ec8ad52 \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W0414 23:07:31.983777 2432 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.flannel.base/node_readiness (7.87s)\n --- PASS: kubeadm.v1.35.1.flannel.base/nginx_deployment (22.04s)\n --- PASS: kubeadm.v1.35.1.flannel.base/NFS_deployment (18.93s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.verity/corruption","result":"PASS","duration":175452004426,"output":""},{"name":"cl.verity","result":"PASS","duration":357831666932,"output":" --- PASS: cl.verity/verify (88.42s)\n cluster.go:125: Success\n --- PASS: cl.verity/corruption (175.45s)\n"},{"name":"coreos.update.badusr","result":"PASS","duration":424043509413,"output":""},{"name":"cl.locksmith.cluster","result":"PASS","duration":450655610469,"output":""}],"result":"FAIL","platform":"azure","version":"4628.0.0"}