### Test report for 4081.3.7+nightly-20260427-2100 / amd64 **Platforms tested** : qemu 🟢 ok **bpf.ig**; Succeeded: qemu (1) 🟢 ok **cl.basic**; Succeeded: qemu (1) 🟢 ok **cl.cgroupv1**; Succeeded: qemu (1) 🟢 ok **cl.cloudinit.basic**; Succeeded: qemu (1) 🟢 ok **cl.cloudinit.multipart-mime**; Succeeded: qemu (1) 🟢 ok **cl.cloudinit.script**; Succeeded: qemu (1) 🟢 ok **cl.disk.raid0.data**; Succeeded: qemu (1) 🟢 ok **cl.disk.raid0.root**; Succeeded: qemu (1) 🟢 ok **cl.disk.raid1.data**; Succeeded: qemu (1) 🟢 ok **cl.disk.raid1.root**; Succeeded: qemu (1) 🟢 ok **cl.etcd-member.discovery**; Succeeded: qemu (1) 🟢 ok **cl.etcd-member.etcdctlv3**; Succeeded: qemu (1) 🟢 ok **cl.etcd-member.v2-backup-restore**; Succeeded: qemu (1) 🟢 ok **cl.filesystem**; Succeeded: qemu (1) 🟢 ok **cl.flannel.udp**; Succeeded: qemu (1) 🟢 ok **cl.flannel.vxlan**; Succeeded: qemu (1) 🟢 ok **cl.ignition.instantiated.enable-unit**; Succeeded: qemu (1) 🟢 ok **cl.ignition.kargs**; Succeeded: qemu (1) 🟢 ok **cl.ignition.luks**; Succeeded: qemu (1) 🟢 ok **cl.ignition.oem.indirect**; Succeeded: qemu (1) 🟢 ok **cl.ignition.oem.indirect.new**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _oem.go:199: Couldn_t reboot machine: machine __2cbb4685-6d16-4822-8a64-eb26e12ee500__ failed basic checks: some systemd units failed:" L2: "??? ldconfig.service loaded failed failed Rebuild Dynamic Linker Cache" L3: "status: " L4: "journal:-- No entries --" L5: "harness.go:616: Found systemd unit failed to start (?[0;1;39mldconfig.service?[0m - Rebuild Dynamic Linker Cache. ) on machine 2cbb4685-6d16-4822-8a64-eb26e12ee500 console_" L6: " " ```
🟢 ok **cl.ignition.oem.regular**; Succeeded: qemu (1) 🟢 ok **cl.ignition.oem.regular.new**; Succeeded: qemu (1) 🟢 ok **cl.ignition.oem.reuse**; Succeeded: qemu (1) 🟢 ok **cl.ignition.oem.wipe**; Succeeded: qemu (1) 🟢 ok **cl.ignition.partition_on_boot_disk**; Succeeded: qemu (1) 🟢 ok **cl.ignition.symlink**; Succeeded: qemu (1) 🟢 ok **cl.ignition.translation**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v1.btrfsroot**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v1.ext4root**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v1.groups**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v1.once**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v1.sethostname**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v1.users**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v1.xfsroot**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v2.btrfsroot**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v2.ext4root**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v2.users**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v2.xfsroot**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v2_1.ext4checkexisting**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v2_1.swap**; Succeeded: qemu (1) 🟢 ok **cl.ignition.v2_1.vfat**; Succeeded: qemu (1) 🟢 ok **cl.install.cloudinit**; Succeeded: qemu (1) 🟢 ok **cl.internet**; Succeeded: qemu (1) 🟢 ok **cl.locksmith.cluster**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _harness.go:616: Found systemd unit failed to start (?[0;1;39mldconfig.service?[0m - Rebuild Dynamic Linker Cache. ) on machine b31d9a63-cdbf-4edc-8441-5974be135bd3 console_" L2: " " ```
🟢 ok **cl.misc.falco**; Succeeded: qemu (1) 🟢 ok **cl.network.initramfs.second-boot**; Succeeded: qemu (1) 🟢 ok **cl.network.iptables**; Succeeded: qemu (1) 🟢 ok **cl.network.listeners**; Succeeded: qemu (1) 🟢 ok **cl.network.wireguard**; Succeeded: qemu (1) 🟢 ok **cl.omaha.ping**; Succeeded: qemu (1) 🟢 ok **cl.osreset.ignition-rerun**; Succeeded: qemu (1) 🟢 ok **cl.overlay.cleanup**; Succeeded: qemu (1) 🟢 ok **cl.swap_activation**; Succeeded: qemu (1) 🟢 ok **cl.sysext.boot**; Succeeded: qemu (1) 🟢 ok **cl.sysext.fallbackdownload**; Succeeded: qemu (1) 🟢 ok **cl.tang.nonroot**; Succeeded: qemu (1) 🟢 ok **cl.tang.root**; Succeeded: qemu (1) 🟢 ok **cl.toolbox.dnf-install**; Succeeded: qemu (1) 🟢 ok **cl.tpm.nonroot**; Succeeded: qemu (1) 🟢 ok **cl.tpm.root**; Succeeded: qemu (1) 🟢 ok **cl.tpm.root-cryptenroll**; Succeeded: qemu (1) 🟢 ok **cl.tpm.root-cryptenroll-pcr-noupdate**; Succeeded: qemu (1) 🟢 ok **cl.tpm.root-cryptenroll-pcr-withupdate**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _cluster.go:125: Warning: keyslot operation could fail as it requires more than available memory." L2: "cluster.go:125: New TPM2 token enrolled as key slot 1." L3: "cluster.go:125: Wiped slot 2." L4: "harness.go:616: Found systemd unit failed to start (?[0;1;39mldconfig.service?[0m - Rebuild Dynamic Linker Cache. ) on machine 0f8a05d1-7bef-4800-9d9d-2edc83c6ef6a console_" L5: " " ```
🟢 ok **cl.update.badverity**; Succeeded: qemu (1) 🟢 ok **cl.update.reboot**; Succeeded: qemu (1) 🟢 ok **cl.users.shells**; Succeeded: qemu (1) 🟢 ok **cl.verity**; Succeeded: qemu (1) 🟢 ok **coreos.auth.verify**; Succeeded: qemu (1) 🟢 ok **coreos.ignition.groups**; Succeeded: qemu (1) 🟢 ok **coreos.ignition.once**; Succeeded: qemu (1) 🟢 ok **coreos.ignition.resource.local**; Succeeded: qemu (1) 🟢 ok **coreos.ignition.resource.remote**; Succeeded: qemu (1) 🟢 ok **coreos.ignition.resource.s3.versioned**; Succeeded: qemu (1) 🟢 ok **coreos.ignition.security.tls**; Succeeded: qemu (1) 🟢 ok **coreos.ignition.sethostname**; Succeeded: qemu (1) 🟢 ok **coreos.ignition.systemd.enable-service**; Succeeded: qemu (1) 🟢 ok **coreos.locksmith.reboot**; Succeeded: qemu (1) 🟢 ok **coreos.locksmith.tls**; Succeeded: qemu (1) 🟢 ok **coreos.selinux.boolean**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _harness.go:616: Found systemd dependency unit failed to start (?[0;1;39mserial-getty???S0.service?[0m - Serial Getty on ttyS0. ) on machine 094f9ff2-7984-4577-8891-511bfde4689b console_" L2: " " ```
🟢 ok **coreos.selinux.enforce**; Succeeded: qemu (1) 🟢 ok **coreos.tls.fetch-urls**; Succeeded: qemu (1) 🟢 ok **coreos.update.badusr**; Succeeded: qemu (1) 🟢 ok **devcontainer.docker**; Succeeded: qemu (1) 🟢 ok **devcontainer.systemd-nspawn**; Succeeded: qemu (1) 🟢 ok **docker.base**; Succeeded: qemu (1) 🟢 ok **docker.btrfs-storage**; Succeeded: qemu (1) 🟢 ok **docker.containerd-restart**; Succeeded: qemu (1) 🟢 ok **docker.enable-service.sysext**; Succeeded: qemu (1) 🟢 ok **docker.lib-coreos-dockerd-compat**; Succeeded: qemu (1) 🟢 ok **docker.network-openbsd-nc**; Succeeded: qemu (1) 🟢 ok **docker.selinux**; Succeeded: qemu (1) 🟢 ok **docker.userns**; Succeeded: qemu (1) 🟢 ok **kubeadm.v1.33.8.calico.base**; Succeeded: qemu (1) 🟢 ok **kubeadm.v1.33.8.calico.cgroupv1.base**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _cluster.go:125: I0428 01:13:33.783294 1971 version.go:261] remote version is much newer: v1.36.0; falling back to: stable-1.33" L2: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.11" L3: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.11" L4: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.11" L5: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.11" L6: "cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0" L7: "cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10" L8: "cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0" L9: "cluster.go:125: I0428 01:15:17.818978 2362 version.go:261] remote version is much newer: v1.36.0; falling back to: stable-1.33" L10: "cluster.go:125: [init] Using Kubernetes version: v1.33.11" L11: "cluster.go:125: [preflight] Running pre-flight checks" L12: "cluster.go:125: [WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2" L13: "cluster.go:125: [WARNING Service-Kubelet]: kubelet service is not enabled, please run _systemctl enable kubelet.service_" L14: "cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster" L15: "cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection" L16: "cluster.go:125: [preflight] You can also perform this action beforehand using _kubeadm config images pull_" L17: "cluster.go:125: W0428 01:15:20.483666 2362 checks.go:843] detected that the sandbox image __registry.k8s.io/pause:3.8__ of the container runtime is inconsistent with that used by kubeadm.It is reco?mmended to use __registry.k8s.io/pause:3.10__ as the CRI sandbox image." L18: "cluster.go:125: [certs] Using certificateDir folder __/etc/kubernetes/pki__" L19: "cluster.go:125: [certs] Generating __ca__ certificate and key" L20: "cluster.go:125: [certs] Generating __apiserver__ certificate and key" L21: "cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.3?6]" L22: "cluster.go:125: [certs] Generating __apiserver-kubelet-client__ certificate and key" L23: "cluster.go:125: [certs] Generating __front-proxy-ca__ certificate and key" L24: "cluster.go:125: [certs] Generating __front-proxy-client__ certificate and key" L25: "cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation" L26: "cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation" L27: "cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation" L28: "cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation" L29: "cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation" L30: "cluster.go:125: [certs] Generating __sa__ key and public key" L31: "cluster.go:125: [kubeconfig] Using kubeconfig folder __/etc/kubernetes__" L32: "cluster.go:125: [kubeconfig] Writing __admin.conf__ kubeconfig file" L33: "cluster.go:125: [kubeconfig] Writing __super-admin.conf__ kubeconfig file" L34: "cluster.go:125: [kubeconfig] Writing __kubelet.conf__ kubeconfig file" L35: "cluster.go:125: [kubeconfig] Writing __controller-manager.conf__ kubeconfig file" L36: "cluster.go:125: [kubeconfig] Writing __scheduler.conf__ kubeconfig file" L37: "cluster.go:125: [control-plane] Using manifest folder __/etc/kubernetes/manifests__" L38: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-apiserver__" L39: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-controller-manager__" L40: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-scheduler__" L41: "cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file __/var/lib/kubelet/kubeadm-flags.env__" L42: "cluster.go:125: [kubelet-start] Writing kubelet configuration to file __/var/lib/kubelet/config.yaml__" L43: "cluster.go:125: [kubelet-start] Starting the kubelet" L44: "cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory __/etc/kubernetes/manifests__" L45: "cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s" L46: "cluster.go:125: [kubelet-check] The kubelet is healthy after 9.556124949s" L47: "cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s" L48: "cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.36:6443/livez" L49: "cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz" L50: "cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez" L51: "cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 12.514610067s" L52: "cluster.go:125: [control-plane-check] kube-scheduler is healthy after 33.26645223s" L53: "cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5m26.729805727s" L54: "cluster.go:125: [upload-config] Storing the configuration used in ConfigMap __kubeadm-config__ in the __kube-system__ Namespace" L55: "cluster.go:125: [kubelet] Creating a ConfigMap __kubelet-config__ in namespace kube-system with the configuration for the kubelets in the cluster" L56: "cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs" L57: "cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]" L58: "cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]" L59: "cluster.go:125: [bootstrap-token] Using token: 8myaks.5qepj5pe2c3xu7n4" L60: "cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles" L61: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes" L62: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials" L63: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token" L64: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster" L65: "cluster.go:125: [bootstrap-token] Creating the __cluster-info__ ConfigMap in the __kube-public__ namespace" L66: "cluster.go:125: [kubelet-finalize] Updating __/etc/kubernetes/kubelet.conf__ to point to a rotatable kubelet client certificate and key" L67: "cluster.go:125: [addons] Applied essential addon: CoreDNS" L68: "cluster.go:125: [addons] Applied essential addon: kube-proxy" L69: "cluster.go:125: " L70: "cluster.go:125: Your Kubernetes control-plane has initialized successfully!" L71: "cluster.go:125: " L72: "cluster.go:125: To start using your cluster, you need to run the following as a regular user:" L73: "cluster.go:125: " L74: "cluster.go:125: mkdir -p $HOME/.kube" L75: "cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config" L76: "cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config" L77: "cluster.go:125: " L78: "cluster.go:125: Alternatively, if you are the root user, you can run:" L79: "cluster.go:125: " L80: "cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf" L81: "cluster.go:125: " L82: "cluster.go:125: You should now deploy a pod network to the cluster." L83: "cluster.go:125: Run __kubectl apply -f [podnetwork].yaml__ with one of the options listed at:" L84: "cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/" L85: "cluster.go:125: " L86: "cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:" L87: "cluster.go:125: " L88: "cluster.go:125: kubeadm join 10.0.0.36:6443 --token 8myaks.5qepj5pe2c3xu7n4 _" L89: "cluster.go:125: --discovery-token-ca-cert-hash sha256:de4456cc8fd9d5de8924879e3d22500b44e7870e7bf0b41815adbbc259c5c46a " L90: "cluster.go:125: namespace/tigera-operator created" L91: "cluster.go:125: serviceaccount/tigera-operator created" L92: "cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created" L93: "cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created" L94: "cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created" L95: "cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created" L96: "cluster.go:125: deployment.apps/tigera-operator created" L97: "cluster.go:125: error: timed out waiting for the condition" L98: "kubeadm.go:197: unable to setup cluster: unable to run master script: Process exited with status 1_" L99: " " ```
🟢 ok **kubeadm.v1.33.8.cilium.base**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _cluster.go:125: I0428 00:20:36.273697 1812 version.go:261] remote version is much newer: v1.36.0; falling back to: stable-1.33" L2: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.11" L3: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.11" L4: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.11" L5: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.11" L6: "cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0" L7: "cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10" L8: "cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0" L9: "cluster.go:125: W0428 00:23:55.719822 2191 version.go:109] could not fetch a Kubernetes version from the internet: unable to get URL __https://dl.k8s.io/release/stable-1.txt__: Get __https://dl.k8s?.io/release/stable-1.txt__: context deadline exceeded (Client.Timeout exceeded while awaiting headers)" L10: "cluster.go:125: W0428 00:23:55.727539 2191 version.go:110] falling back to the local client version: v1.33.8" L11: "cluster.go:125: [init] Using Kubernetes version: v1.33.8" L12: "cluster.go:125: [preflight] Running pre-flight checks" L13: "cluster.go:125: [WARNING Service-Kubelet]: kubelet service is not enabled, please run _systemctl enable kubelet.service_" L14: "cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster" L15: "cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection" L16: "cluster.go:125: [preflight] You can also perform this action beforehand using _kubeadm config images pull_" L17: "cluster.go:125: W0428 00:24:39.456394 2191 checks.go:843] detected that the sandbox image __registry.k8s.io/pause:3.8__ of the container runtime is inconsistent with that used by kubeadm.It is reco?mmended to use __registry.k8s.io/pause:3.10__ as the CRI sandbox image." L18: "cluster.go:125: [certs] Using certificateDir folder __/etc/kubernetes/pki__" L19: "cluster.go:125: [certs] Generating __ca__ certificate and key" L20: "cluster.go:125: [certs] Generating __apiserver__ certificate and key" L21: "cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.1?4]" L22: "cluster.go:125: [certs] Generating __apiserver-kubelet-client__ certificate and key" L23: "cluster.go:125: [certs] Generating __front-proxy-ca__ certificate and key" L24: "cluster.go:125: [certs] Generating __front-proxy-client__ certificate and key" L25: "cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation" L26: "cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation" L27: "cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation" L28: "cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation" L29: "cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation" L30: "cluster.go:125: [certs] Generating __sa__ key and public key" L31: "cluster.go:125: [kubeconfig] Using kubeconfig folder __/etc/kubernetes__" L32: "cluster.go:125: [kubeconfig] Writing __admin.conf__ kubeconfig file" L33: "cluster.go:125: [kubeconfig] Writing __super-admin.conf__ kubeconfig file" L34: "cluster.go:125: [kubeconfig] Writing __kubelet.conf__ kubeconfig file" L35: "cluster.go:125: [kubeconfig] Writing __controller-manager.conf__ kubeconfig file" L36: "cluster.go:125: [kubeconfig] Writing __scheduler.conf__ kubeconfig file" L37: "cluster.go:125: [control-plane] Using manifest folder __/etc/kubernetes/manifests__" L38: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-apiserver__" L39: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-controller-manager__" L40: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-scheduler__" L41: "cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file __/var/lib/kubelet/kubeadm-flags.env__" L42: "cluster.go:125: [kubelet-start] Writing kubelet configuration to file __/var/lib/kubelet/config.yaml__" L43: "cluster.go:125: [kubelet-start] Starting the kubelet" L44: "cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory __/etc/kubernetes/manifests__" L45: "cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s" L46: "cluster.go:125: [kubelet-check] The kubelet is healthy after 9.640318265s" L47: "cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s" L48: "cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.14:6443/livez" L49: "cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz" L50: "cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez" L51: "cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2m10.937724322s" L52: "cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2m42.528814298s" L53: "cluster.go:125: [control-plane-check] kube-apiserver is not healthy after 30m0.087375913s" L54: "cluster.go:125: " L55: "cluster.go:125: A control plane component may have crashed or exited when started by the container runtime." L56: "cluster.go:125: To troubleshoot, list all containers using your preferred container runtimes CLI." L57: "cluster.go:125: Here is one example how you may list all running Kubernetes containers by using crictl:" L58: "cluster.go:125: - _crictl --runtime-endpoint unix:///var/run/containerd/containerd.sock ps -a | grep kube | grep -v pause_" L59: "cluster.go:125: Once you have found the failing container, you can inspect its logs with:" L60: "cluster.go:125: - _crictl --runtime-endpoint unix:///var/run/containerd/containerd.sock logs CONTAINERID_" L61: "cluster.go:125: " L62: "cluster.go:125: error execution phase wait-control-plane: failed while waiting for the control plane to start: kube-apiserver check failed at https://10.0.0.14:6443/livez: client rate limiter Wait ret?urned an error: context deadline exceeded" L63: "cluster.go:125: To see the stack trace of this error execute with --v=5 or higher" L64: "kubeadm.go:197: unable to setup cluster: unable to run master script: Process exited with status 1_" L65: " " ```
🟢 ok **kubeadm.v1.33.8.cilium.cgroupv1.base**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _cluster.go:125: W0428 01:21:30.851885 2027 version.go:109] could not fetch a Kubernetes version from the internet: unable to get URL __https://dl.k8s.io/release/stable-1.txt__: Get __https:?//dl.k8s.io/release/stable-1.txt__: context deadline exceeded (Client.Timeout exceeded while awaiting headers)" L2: "cluster.go:125: W0428 01:21:30.868842 2027 version.go:110] falling back to the local client version: v1.33.8" L3: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.8" L4: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.8" L5: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.8" L6: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.8" L7: "cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0" L8: "cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10" L9: "cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0" L10: "cluster.go:125: I0428 01:24:43.676480 2377 version.go:261] remote version is much newer: v1.36.0; falling back to: stable-1.33" L11: "cluster.go:125: [init] Using Kubernetes version: v1.33.11" L12: "cluster.go:125: [preflight] Running pre-flight checks" L13: "cluster.go:125: [WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2" L14: "cluster.go:125: [WARNING Service-Kubelet]: kubelet service is not enabled, please run _systemctl enable kubelet.service_" L15: "cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster" L16: "cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection" L17: "cluster.go:125: [preflight] You can also perform this action beforehand using _kubeadm config images pull_" L18: "cluster.go:125: W0428 01:24:44.837239 2377 checks.go:843] detected that the sandbox image __registry.k8s.io/pause:3.8__ of the container runtime is inconsistent with that used by kubeadm.It is reco?mmended to use __registry.k8s.io/pause:3.10__ as the CRI sandbox image." L19: "cluster.go:125: [certs] Using certificateDir folder __/etc/kubernetes/pki__" L20: "cluster.go:125: [certs] Generating __ca__ certificate and key" L21: "cluster.go:125: [certs] Generating __apiserver__ certificate and key" L22: "cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.3?5]" L23: "cluster.go:125: [certs] Generating __apiserver-kubelet-client__ certificate and key" L24: "cluster.go:125: [certs] Generating __front-proxy-ca__ certificate and key" L25: "cluster.go:125: [certs] Generating __front-proxy-client__ certificate and key" L26: "cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation" L27: "cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation" L28: "cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation" L29: "cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation" L30: "cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation" L31: "cluster.go:125: [certs] Generating __sa__ key and public key" L32: "cluster.go:125: [kubeconfig] Using kubeconfig folder __/etc/kubernetes__" L33: "cluster.go:125: [kubeconfig] Writing __admin.conf__ kubeconfig file" L34: "cluster.go:125: [kubeconfig] Writing __super-admin.conf__ kubeconfig file" L35: "cluster.go:125: [kubeconfig] Writing __kubelet.conf__ kubeconfig file" L36: "cluster.go:125: [kubeconfig] Writing __controller-manager.conf__ kubeconfig file" L37: "cluster.go:125: [kubeconfig] Writing __scheduler.conf__ kubeconfig file" L38: "cluster.go:125: [control-plane] Using manifest folder __/etc/kubernetes/manifests__" L39: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-apiserver__" L40: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-controller-manager__" L41: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-scheduler__" L42: "cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file __/var/lib/kubelet/kubeadm-flags.env__" L43: "cluster.go:125: [kubelet-start] Writing kubelet configuration to file __/var/lib/kubelet/config.yaml__" L44: "cluster.go:125: [kubelet-start] Starting the kubelet" L45: "cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory __/etc/kubernetes/manifests__" L46: "cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s" L47: "cluster.go:125: [kubelet-check] The kubelet is healthy after 3.554147454s" L48: "cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s" L49: "cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.35:6443/livez" L50: "cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz" L51: "cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez" L52: "cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 5.375241645s" L53: "cluster.go:125: [control-plane-check] kube-scheduler is healthy after 13.323298472s" L54: "cluster.go:125: [control-plane-check] kube-apiserver is healthy after 32.509641782s" L55: "cluster.go:125: [upload-config] Storing the configuration used in ConfigMap __kubeadm-config__ in the __kube-system__ Namespace" L56: "cluster.go:125: [kubelet] Creating a ConfigMap __kubelet-config__ in namespace kube-system with the configuration for the kubelets in the cluster" L57: "cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs" L58: "cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]" L59: "cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]" L60: "cluster.go:125: [bootstrap-token] Using token: 7zpwer.5wd84qqsn1hxwga5" L61: "cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles" L62: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes" L63: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials" L64: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token" L65: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster" L66: "cluster.go:125: [bootstrap-token] Creating the __cluster-info__ ConfigMap in the __kube-public__ namespace" L67: "cluster.go:125: [kubelet-finalize] Updating __/etc/kubernetes/kubelet.conf__ to point to a rotatable kubelet client certificate and key" L68: "cluster.go:125: [addons] Applied essential addon: CoreDNS" L69: "cluster.go:125: [addons] Applied essential addon: kube-proxy" L70: "cluster.go:125: " L71: "cluster.go:125: Your Kubernetes control-plane has initialized successfully!" L72: "cluster.go:125: " L73: "cluster.go:125: To start using your cluster, you need to run the following as a regular user:" L74: "cluster.go:125: " L75: "cluster.go:125: mkdir -p $HOME/.kube" L76: "cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config" L77: "cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config" L78: "cluster.go:125: " L79: "cluster.go:125: Alternatively, if you are the root user, you can run:" L80: "cluster.go:125: " L81: "cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf" L82: "cluster.go:125: " L83: "cluster.go:125: You should now deploy a pod network to the cluster." L84: "cluster.go:125: Run __kubectl apply -f [podnetwork].yaml__ with one of the options listed at:" L85: "cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/" L86: "cluster.go:125: " L87: "cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:" L88: "cluster.go:125: " L89: "cluster.go:125: kubeadm join 10.0.0.35:6443 --token 7zpwer.5wd84qqsn1hxwga5 _" L90: "cluster.go:125: --discovery-token-ca-cert-hash sha256:23719da175e4aa745482fe0c9bd1fdb4dd49ea7b7aa0720d9af0b9d8efc1b2db " L91: "cluster.go:125: i Using Cilium version 1.12.5" L92: "cluster.go:125: ? Auto-detected cluster name: kubernetes" L93: "cluster.go:125: ? Auto-detected datapath mode: tunnel" L94: "cluster.go:125: ? Auto-detected kube-proxy has been installed" L95: "cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-?cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vx?lan" L96: "cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret" L97: "cluster.go:125: ? Created CA in secret cilium-ca" L98: "cluster.go:125: ? Generating certificates for Hubble..." L99: "cluster.go:125: ? Creating Service accounts..." L100: "cluster.go:125: ? Creating Cluster roles..." L101: "cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5..." L102: "cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true" L103: "cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17" L104: "cluster.go:125: ? Creating Agent DaemonSet..." L105: "cluster.go:125: level=warning msg=__spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the ___appArmorProfile___ field instead?__ subsys=klog" L106: "cluster.go:125: level=warning msg=__spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the ___appArmorProfile___ fi?eld instead__ subsys=klog" L107: "cluster.go:125: level=warning msg=__spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the ___appArmorProfile___ field i?nstead__ subsys=klog" L108: "cluster.go:125: level=warning msg=__spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the ___appArmorProfile___ field instead?__ subsys=klog" L109: "cluster.go:125: ? Creating Operator Deployment..." L110: "cluster.go:125: ? Waiting for Cilium to be installed and ready..." L111: "cluster.go:125: ? Cilium was successfully installed! Run _cilium status_ to view installation health" L112: "cluster.go:125: ?[33m /??_" L113: "cluster.go:125: ?[36m /???[33m___/?[32m??_?[0m Cilium: ?[32mOK?[0m" L114: "cluster.go:125: ?[36m ___?[31m/??_?[32m__/?[0m Operator: ?[32mOK?[0m" L115: "cluster.go:125: ?[32m /???[31m___/?[35m??_?[0m Hubble: ?[36mdisabled?[0m" L116: "cluster.go:125: ?[32m ___?[34m/??_?[35m__/?[0m ClusterMesh: ?[36mdisabled?[0m" L117: "cluster.go:125: ?[34m ___/" L118: "cluster.go:125: ?[0m" L119: "cluster.go:125: Deployment cilium-operator Desired: 1, Ready: ?[32m1/1?[0m, Available: ?[32m1/1?[0m" L120: "cluster.go:125: DaemonSet cilium Desired: 1, Ready: ?[32m1/1?[0m, Available: ?[32m1/1?[0m" L121: "cluster.go:125: Containers: cilium-operator Running: ?[32m1?[0m" L122: "cluster.go:125: cilium Running: ?[32m1?[0m" L123: "cluster.go:125: Cluster Pods: 2/2 managed by Cilium" L124: "cluster.go:125: Image versions cilium quay.io/cilium/cilium:v1.12.5@sha256:06ce2b0a0a472e73334a7504ee5c5d8b2e2d7b72ef728ad94e564740dd505be5: 1" L125: "cluster.go:125: cilium-operator quay.io/cilium/operator-generic:v1.12.5@sha256:b296eb7f0f7656a5cc19724f40a8a7121b7fd725278b7d61dc91fe0b7ffd7c0e: 1" L126: "cluster.go:125: W0428 01:27:01.503855 1768 joinconfiguration.go:113] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration" L127: "cluster.go:125: [WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2" L128: "cluster.go:125: [WARNING Service-Kubelet]: kubelet service is not enabled, please run _systemctl enable kubelet.service_" L129: "--- FAIL: kubeadm.v1.33.8.cilium.cgroupv1.base/IPSec_encryption (82.16s)" L130: "cluster.go:125: level=warning msg=__spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the ___appArmorProfile___ field instead?__ subsys=klog" L131: "cluster.go:125: level=warning msg=__spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the ___appArmorProfile___ fi?eld instead__ subsys=klog" L132: "cluster.go:125: level=warning msg=__spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the ___appArmorProfile___ field i?nstead__ subsys=klog" L133: "cluster.go:125: level=warning msg=__spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the ___appArmorProfile___ field instead?__ subsys=klog" L134: "cluster.go:125: Error: Unable to determine status: timeout while waiting for status to become successful: context deadline exceeded" L135: "cluster.go:145: __/opt/bin/cilium status --wait --wait-duration 1m__ failed: output ?[33m /????_" L136: "?[36m /?????[33m___/?[32m????_?[0m Cilium: ?[31m1 errors?[0m, ?[33m1 warnings?[0m" L137: "?[36m ___?[31m/????_?[32m__/?[0m Operator: ?[31m1 errors?[0m" L138: "?[32m /?????[31m___/?[35m????_?[0m Hubble: ?[33m1 warnings?[0m" L139: "?[32m ___?[34m/????_?[35m__/?[0m ClusterMesh: ?[33m1 warnings?[0m" L140: "?[34m ___/" L141: "?[0m" L142: "Deployment cilium-operator Desired: 1, Unavailable: ?[31m1/1?[0m" L143: "Containers: cilium Running: ?[32m1?[0m, Pending: ?[32m1?[0m" L144: "Cluster Pods: 0/0 managed by Cilium" L145: "Image versions cilium quay.io/cilium/cilium:v1.12.5@sha256:06ce2b0a0a472e73334a7504ee5c5d8b2e2d7b72ef728ad94e564740dd505be5: 2" L146: "Errors: cilium cilium Get __https://10.0.0.35:6443/apis/apps/v1/namespaces/kube-system/daemonsets/cilium__: context deadline exceeded" L147: "cilium-operator cilium-operator 1 pods of Deployment cilium-operator are not ready" L148: "Warnings: cilium cilium-gjq5g pod is pending" L149: "hubble-ui hubble-ui hubble ui is not deployed" L150: "hubble-relay hubble-relay hubble relay is not deployed" L151: "clustermesh-apiserver clustermesh-apiserver clustermesh is not deployed, status Process exited with status 1_" L152: " " ```
🟢 ok **kubeadm.v1.33.8.flannel.base**; Succeeded: qemu (1) 🟢 ok **kubeadm.v1.33.8.flannel.cgroupv1.base**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _cluster.go:125: I0428 00:55:03.285709 1972 version.go:261] remote version is much newer: v1.36.0; falling back to: stable-1.33" L2: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.33.11" L3: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.33.11" L4: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.33.11" L5: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.33.11" L6: "cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.0" L7: "cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10" L8: "cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.5.24-0" L9: "cluster.go:125: I0428 00:58:12.941838 2414 version.go:261] remote version is much newer: v1.36.0; falling back to: stable-1.33" L10: "cluster.go:125: [init] Using Kubernetes version: v1.33.11" L11: "cluster.go:125: [preflight] Running pre-flight checks" L12: "cluster.go:125: [WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2" L13: "cluster.go:125: [WARNING Service-Kubelet]: kubelet service is not enabled, please run _systemctl enable kubelet.service_" L14: "cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster" L15: "cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection" L16: "cluster.go:125: [preflight] You can also perform this action beforehand using _kubeadm config images pull_" L17: "cluster.go:125: W0428 00:58:18.297160 2414 checks.go:843] detected that the sandbox image __registry.k8s.io/pause:3.8__ of the container runtime is inconsistent with that used by kubeadm.It is reco?mmended to use __registry.k8s.io/pause:3.10__ as the CRI sandbox image." L18: "cluster.go:125: [certs] Using certificateDir folder __/etc/kubernetes/pki__" L19: "cluster.go:125: [certs] Generating __ca__ certificate and key" L20: "cluster.go:125: [certs] Generating __apiserver__ certificate and key" L21: "cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.2?1]" L22: "cluster.go:125: [certs] Generating __apiserver-kubelet-client__ certificate and key" L23: "cluster.go:125: [certs] Generating __front-proxy-ca__ certificate and key" L24: "cluster.go:125: [certs] Generating __front-proxy-client__ certificate and key" L25: "cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation" L26: "cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation" L27: "cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation" L28: "cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation" L29: "cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation" L30: "cluster.go:125: [certs] Generating __sa__ key and public key" L31: "cluster.go:125: [kubeconfig] Using kubeconfig folder __/etc/kubernetes__" L32: "cluster.go:125: [kubeconfig] Writing __admin.conf__ kubeconfig file" L33: "cluster.go:125: [kubeconfig] Writing __super-admin.conf__ kubeconfig file" L34: "cluster.go:125: [kubeconfig] Writing __kubelet.conf__ kubeconfig file" L35: "cluster.go:125: [kubeconfig] Writing __controller-manager.conf__ kubeconfig file" L36: "cluster.go:125: [kubeconfig] Writing __scheduler.conf__ kubeconfig file" L37: "cluster.go:125: [control-plane] Using manifest folder __/etc/kubernetes/manifests__" L38: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-apiserver__" L39: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-controller-manager__" L40: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-scheduler__" L41: "cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file __/var/lib/kubelet/kubeadm-flags.env__" L42: "cluster.go:125: [kubelet-start] Writing kubelet configuration to file __/var/lib/kubelet/config.yaml__" L43: "cluster.go:125: [kubelet-start] Starting the kubelet" L44: "cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory __/etc/kubernetes/manifests__" L45: "cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s" L46: "cluster.go:125: [kubelet-check] The kubelet is healthy after 15.196539171s" L47: "cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s" L48: "cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.21:6443/livez" L49: "cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz" L50: "cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez" L51: "cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 17.004123935s" L52: "cluster.go:125: [control-plane-check] kube-scheduler is healthy after 39.07518495s" L53: "cluster.go:125: [control-plane-check] kube-apiserver is healthy after 1m42.86595595s" L54: "cluster.go:125: [upload-config] Storing the configuration used in ConfigMap __kubeadm-config__ in the __kube-system__ Namespace" L55: "cluster.go:125: [kubelet] Creating a ConfigMap __kubelet-config__ in namespace kube-system with the configuration for the kubelets in the cluster" L56: "cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs" L57: "cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]" L58: "cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]" L59: "cluster.go:125: [bootstrap-token] Using token: p9a51q.tzl6n3ghtfr15fyz" L60: "cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles" L61: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes" L62: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials" L63: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token" L64: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster" L65: "cluster.go:125: [bootstrap-token] Creating the __cluster-info__ ConfigMap in the __kube-public__ namespace" L66: "cluster.go:125: [kubelet-finalize] Updating __/etc/kubernetes/kubelet.conf__ to point to a rotatable kubelet client certificate and key" L67: "cluster.go:125: [addons] Applied essential addon: CoreDNS" L68: "cluster.go:125: [addons] Applied essential addon: kube-proxy" L69: "cluster.go:125: " L70: "cluster.go:125: Your Kubernetes control-plane has initialized successfully!" L71: "cluster.go:125: " L72: "cluster.go:125: To start using your cluster, you need to run the following as a regular user:" L73: "cluster.go:125: " L74: "cluster.go:125: mkdir -p $HOME/.kube" L75: "cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config" L76: "cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config" L77: "cluster.go:125: " L78: "cluster.go:125: Alternatively, if you are the root user, you can run:" L79: "cluster.go:125: " L80: "cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf" L81: "cluster.go:125: " L82: "cluster.go:125: You should now deploy a pod network to the cluster." L83: "cluster.go:125: Run __kubectl apply -f [podnetwork].yaml__ with one of the options listed at:" L84: "cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/" L85: "cluster.go:125: " L86: "cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:" L87: "cluster.go:125: " L88: "cluster.go:125: kubeadm join 10.0.0.21:6443 --token p9a51q.tzl6n3ghtfr15fyz _" L89: "cluster.go:125: --discovery-token-ca-cert-hash sha256:43230dfec91638f8352f4cca720a20ceb427cad564b7c4818e08538011ae1330 " L90: "cluster.go:125: namespace/kube-flannel created" L91: "cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created" L92: "cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created" L93: "cluster.go:125: serviceaccount/flannel created" L94: "cluster.go:125: configmap/kube-flannel-cfg created" L95: "cluster.go:125: daemonset.apps/kube-flannel-ds created" L96: "cluster.go:125: W0428 01:02:44.902296 1758 joinconfiguration.go:113] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration" L97: "cluster.go:125: [WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2" L98: "cluster.go:125: [WARNING Service-Kubelet]: kubelet service is not enabled, please run _systemctl enable kubelet.service_" L99: "--- FAIL: kubeadm.v1.33.8.flannel.cgroupv1.base/NFS_deployment (826.97s)" L100: "cluster.go:125: error when retrieving current configuration of:" L101: "cluster.go:125: Resource: __/v1, Resource=pods__, GroupVersionKind: __/v1, Kind=Pod__" L102: "cluster.go:125: Name: __test-pod-1__, Namespace: __default__" L103: "cluster.go:125: from server for: __nfs-pod.yaml__: Get __https://10.0.0.21:6443/api/v1/namespaces/default/pods/test-pod-1__: net/http: TLS handshake timeout" L104: "cluster.go:125: error when retrieving current configuration of:" L105: "cluster.go:125: Resource: __/v1, Resource=persistentvolumeclaims__, GroupVersionKind: __/v1, Kind=PersistentVolumeClaim__" L106: "cluster.go:125: Name: __test-dynamic-volume-claim__, Namespace: __default__" L107: "cluster.go:125: from server for: __nfs-pvc.yaml__: Get __https://10.0.0.21:6443/api/v1/namespaces/default/persistentvolumeclaims/test-dynamic-volume-claim__: net/http: TLS handshake timeout" L108: "kubeadm.go:247: unable to create NFS pod and pvc: Process exited with status 1_" L109: " " ```
🟢 ok **kubeadm.v1.34.4.calico.base**; Succeeded: qemu (1) 🟢 ok **kubeadm.v1.34.4.cilium.base**; Succeeded: qemu (1) 🟢 ok **kubeadm.v1.34.4.flannel.base**; Succeeded: qemu (2); Failed: qemu (1)
                Diagnostic output for qemu, run 1 ``` L1: " Error: _cluster.go:125: I0428 00:18:55.154190 1759 version.go:260] remote version is much newer: v1.36.0; falling back to: stable-1.34" L2: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.7" L3: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.7" L4: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.7" L5: "cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.7" L6: "cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1" L7: "cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1" L8: "cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0" L9: "cluster.go:125: I0428 00:19:21.798179 2030 version.go:260] remote version is much newer: v1.36.0; falling back to: stable-1.34" L10: "cluster.go:125: [init] Using Kubernetes version: v1.34.7" L11: "cluster.go:125: [preflight] Running pre-flight checks" L12: "cluster.go:125: [WARNING Service-Kubelet]: kubelet service is not enabled, please run _systemctl enable kubelet.service_" L13: "cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster" L14: "cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection" L15: "cluster.go:125: [preflight] You can also perform this action beforehand using _kubeadm config images pull_" L16: "cluster.go:125: W0428 00:19:22.608460 2030 checks.go:827] detected that the sandbox image __registry.k8s.io/pause:3.8__ of the container runtime is inconsistent with that used by kubeadm. It is rec?ommended to use __registry.k8s.io/pause:3.10.1__ as the CRI sandbox image." L17: "cluster.go:125: [certs] Using certificateDir folder __/etc/kubernetes/pki__" L18: "cluster.go:125: [certs] Generating __ca__ certificate and key" L19: "cluster.go:125: [certs] Generating __apiserver__ certificate and key" L20: "cluster.go:125: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost] and IPs [10.96.0.1 10.0.0.1?1]" L21: "cluster.go:125: [certs] Generating __apiserver-kubelet-client__ certificate and key" L22: "cluster.go:125: [certs] Generating __front-proxy-ca__ certificate and key" L23: "cluster.go:125: [certs] Generating __front-proxy-client__ certificate and key" L24: "cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation" L25: "cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation" L26: "cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation" L27: "cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation" L28: "cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation" L29: "cluster.go:125: [certs] Generating __sa__ key and public key" L30: "cluster.go:125: [kubeconfig] Using kubeconfig folder __/etc/kubernetes__" L31: "cluster.go:125: [kubeconfig] Writing __admin.conf__ kubeconfig file" L32: "cluster.go:125: [kubeconfig] Writing __super-admin.conf__ kubeconfig file" L33: "cluster.go:125: [kubeconfig] Writing __kubelet.conf__ kubeconfig file" L34: "cluster.go:125: [kubeconfig] Writing __controller-manager.conf__ kubeconfig file" L35: "cluster.go:125: [kubeconfig] Writing __scheduler.conf__ kubeconfig file" L36: "cluster.go:125: [control-plane] Using manifest folder __/etc/kubernetes/manifests__" L37: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-apiserver__" L38: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-controller-manager__" L39: "cluster.go:125: [control-plane] Creating static Pod manifest for __kube-scheduler__" L40: "cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file __/var/lib/kubelet/kubeadm-flags.env__" L41: "cluster.go:125: [kubelet-start] Writing kubelet configuration to file __/var/lib/kubelet/instance-config.yaml__" L42: "cluster.go:125: [patches] Applied patch of type __application/strategic-merge-patch+json__ to target __kubeletconfiguration__" L43: "cluster.go:125: [kubelet-start] Writing kubelet configuration to file __/var/lib/kubelet/config.yaml__" L44: "cluster.go:125: [kubelet-start] Starting the kubelet" L45: "cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory __/etc/kubernetes/manifests__" L46: "cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s" L47: "cluster.go:125: [kubelet-check] The kubelet is healthy after 1.529342039s" L48: "cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s" L49: "cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.11:6443/livez" L50: "cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz" L51: "cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez" L52: "cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 4.577081937s" L53: "cluster.go:125: [control-plane-check] kube-scheduler is healthy after 12.635958569s" L54: "cluster.go:125: [control-plane-check] kube-apiserver is healthy after 31.186965961s" L55: "cluster.go:125: [upload-config] Storing the configuration used in ConfigMap __kubeadm-config__ in the __kube-system__ Namespace" L56: "cluster.go:125: [kubelet] Creating a ConfigMap __kubelet-config__ in namespace kube-system with the configuration for the kubelets in the cluster" L57: "cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs" L58: "cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]" L59: "cluster.go:125: [mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]" L60: "cluster.go:125: [bootstrap-token] Using token: fzdybk.2tcwkzwrz9p2oj9p" L61: "cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles" L62: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes" L63: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials" L64: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token" L65: "cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster" L66: "cluster.go:125: [bootstrap-token] Creating the __cluster-info__ ConfigMap in the __kube-public__ namespace" L67: "cluster.go:125: [kubelet-finalize] Updating __/etc/kubernetes/kubelet.conf__ to point to a rotatable kubelet client certificate and key" L68: "cluster.go:125: [addons] Applied essential addon: CoreDNS" L69: "cluster.go:125: [addons] Applied essential addon: kube-proxy" L70: "cluster.go:125: " L71: "cluster.go:125: Your Kubernetes control-plane has initialized successfully!" L72: "cluster.go:125: " L73: "cluster.go:125: To start using your cluster, you need to run the following as a regular user:" L74: "cluster.go:125: " L75: "cluster.go:125: mkdir -p $HOME/.kube" L76: "cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config" L77: "cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config" L78: "cluster.go:125: " L79: "cluster.go:125: Alternatively, if you are the root user, you can run:" L80: "cluster.go:125: " L81: "cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf" L82: "cluster.go:125: " L83: "cluster.go:125: You should now deploy a pod network to the cluster." L84: "cluster.go:125: Run __kubectl apply -f [podnetwork].yaml__ with one of the options listed at:" L85: "cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/" L86: "cluster.go:125: " L87: "cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:" L88: "cluster.go:125: " L89: "cluster.go:125: kubeadm join 10.0.0.11:6443 --token fzdybk.2tcwkzwrz9p2oj9p _" L90: "cluster.go:125: --discovery-token-ca-cert-hash sha256:b7027155ade925caa74c5e435d63073ece0c3f245079281d3b5dae8157a4c56d " L91: "cluster.go:125: namespace/kube-flannel created" L92: "cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created" L93: "cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created" L94: "cluster.go:125: serviceaccount/flannel created" L95: "cluster.go:125: configmap/kube-flannel-cfg created" L96: "cluster.go:125: daemonset.apps/kube-flannel-ds created" L97: "cluster.go:125: W0428 00:22:58.598329 1630 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration" L98: "cluster.go:125: [WARNING Service-Kubelet]: kubelet service is not enabled, please run _systemctl enable kubelet.service_" L99: "--- FAIL: kubeadm.v1.34.4.flannel.base/nginx_deployment (1249.95s)" L100: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L101: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L102: "cluster.go:125: error: Get __https://10.0.0.11:6443/apis/apps/v1/namespaces/default/deployments?limit=500__: dial tcp 10.0.0.11:6443: connect: connection refused - error from a previous attempt: read ?tcp 10.0.0.11:59690-_10.0.0.11:6443: read: connection reset by peer" L103: "cluster.go:125: The connection to the server 10.0.0.11:6443 was refused - did you specify the right host or port?" L104: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L105: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L106: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L107: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L108: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L109: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L110: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L111: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L112: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L113: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L114: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L115: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L116: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L117: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L118: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L119: "cluster.go:125: The connection to the server 10.0.0.11:6443 was refused - did you specify the right host or port?" L120: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L121: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L122: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L123: "cluster.go:125: Unable to connect to the server: net/http: TLS handshake timeout" L124: "kubeadm.go:232: nginx is not deployed: ready replicas should be equal to 1: null" L125: "--- FAIL: kubeadm.v1.34.4.flannel.base/NFS_deployment (624.90s)" L126: "cluster.go:125: jq: error (at 🟢 ok **kubeadm.v1.35.1.calico.base**; Succeeded: qemu (1) 🟢 ok **kubeadm.v1.35.1.cilium.base**; Succeeded: qemu (1) 🟢 ok **kubeadm.v1.35.1.flannel.base**; Succeeded: qemu (1) 🟢 ok **linux.nfs.v3**; Succeeded: qemu (1) 🟢 ok **linux.nfs.v4**; Succeeded: qemu (1) 🟢 ok **linux.ntp**; Succeeded: qemu (1) 🟢 ok **misc.fips**; Succeeded: qemu (1) 🟢 ok **packages**; Succeeded: qemu (1) 🟢 ok **sysext.custom-docker.sysext**; Succeeded: qemu (1) 🟢 ok **sysext.custom-oem**; Succeeded: qemu (1) 🟢 ok **sysext.disable-containerd**; Succeeded: qemu (1) 🟢 ok **sysext.disable-docker**; Succeeded: qemu (1) 🟢 ok **sysext.simple**; Succeeded: qemu (1) 🟢 ok **systemd.journal.remote**; Succeeded: qemu (1) 🟢 ok **systemd.journal.user**; Succeeded: qemu (1) 🟢 ok **systemd.sysusers.gshadow**; Succeeded: qemu (1)