{"tests":[{"name":"cl.install.cloudinit","result":"PASS","duration":124945344727,"output":""},{"name":"cl.flannel.udp","result":"PASS","duration":213068217418,"output":" cluster.go:125: Timeout occurred while waiting for network connectivity.\n flannel.go:121: ping from 108789675(10.254.13.0) to 108789676(10.254.77.1)\n"},{"name":"coreos.ignition.ssh.key","result":"PASS","duration":109822042740,"output":""},{"name":"cl.ignition.v2.btrfsroot","result":"PASS","duration":120128069828,"output":""},{"name":"cl.basic/CloudConfig","result":"PASS","duration":1720401828,"output":""},{"name":"cl.basic/Script","result":"PASS","duration":1254020956,"output":""},{"name":"cl.basic/PortSSH","result":"PASS","duration":1197745683,"output":""},{"name":"cl.basic/DbusPerms","result":"PASS","duration":1305985369,"output":""},{"name":"cl.basic/UpdateEngineKeys","result":"PASS","duration":1210469175,"output":""},{"name":"cl.basic/ServicesActive","result":"PASS","duration":1193920385,"output":""},{"name":"cl.basic/MachineID","result":"PASS","duration":1229932825,"output":""},{"name":"cl.basic/Symlink","result":"PASS","duration":1231649211,"output":""},{"name":"kubeadm.v1.37.0.flannel.base/node_readiness","result":"PASS","duration":7549549021,"output":""},{"name":"cl.basic/SymlinkFlatcar","result":"PASS","duration":1218600926,"output":""},{"name":"cl.basic/ReadOnly","result":"PASS","duration":1218158307,"output":""},{"name":"cl.basic/RandomUUID","result":"PASS","duration":1245019643,"output":""},{"name":"cl.basic/Useradd","result":"PASS","duration":1281017508,"output":""},{"name":"cl.basic/Microcode","result":"PASS","duration":1234933684,"output":""},{"name":"cl.basic","result":"PASS","duration":135720841982,"output":" --- PASS: cl.basic/CloudConfig (1.72s)\n --- PASS: cl.basic/Script (1.25s)\n --- PASS: cl.basic/PortSSH (1.20s)\n --- PASS: cl.basic/DbusPerms (1.31s)\n --- PASS: cl.basic/UpdateEngineKeys (1.21s)\n --- PASS: cl.basic/ServicesActive (1.19s)\n --- PASS: cl.basic/MachineID (1.23s)\n --- PASS: cl.basic/Symlink (1.23s)\n --- PASS: cl.basic/SymlinkFlatcar (1.22s)\n --- PASS: cl.basic/ReadOnly (1.22s)\n --- PASS: cl.basic/RandomUUID (1.25s)\n --- PASS: cl.basic/Useradd (1.28s)\n --- PASS: cl.basic/Microcode (1.23s)\n"},{"name":"kubeadm.v1.37.0.flannel.base/nginx_deployment","result":"PASS","duration":8771127440,"output":""},{"name":"kubeadm.v1.37.0.cilium.base/node_readiness","result":"PASS","duration":13849657632,"output":""},{"name":"kubeadm.v1.37.0.cilium.base/nginx_deployment","result":"PASS","duration":8847654305,"output":""},{"name":"kubeadm.v1.37.0.flannel.base/NFS_deployment","result":"PASS","duration":18146855137,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.37.0.flannel.base","result":"PASS","duration":392165989372,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.7.0-0\n cluster.go:125: [init] Using Kubernetes version: v1.37.1\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: E1021 15:35:07.442094 1982 remote_runtime.go:1359] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.38. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:35:07.557648 1982 checks.go:920] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-236-97-86 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.236.97.86]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 535.69µs\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.236.97.86:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 6.952625ms\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 22.027576ms\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 1.500779991s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-236-97-86 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-236-97-86 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: ehii23.fjn7n5d6r4i5wmc3\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the API server kubelet client certificate to access the kubelet API\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.236.97.86:6443 --token ehii23.fjn7n5d6r4i5wmc3 \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:fb7ba64cf7ff07c66a8400e9146deef9def108318a7edd57dd348ece50f026b6 \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W1021 15:37:04.970462 1646 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: E1021 15:37:04.986147 1646 remote_runtime.go:1359] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.38. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.37.0.flannel.base/node_readiness (7.55s)\n --- PASS: kubeadm.v1.37.0.flannel.base/nginx_deployment (8.77s)\n --- PASS: kubeadm.v1.37.0.flannel.base/NFS_deployment (18.15s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.37.0.cilium.base/NFS_deployment","result":"PASS","duration":18398156803,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.37.0.cilium.base/IPSec_encryption","result":"PASS","duration":22113155289,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.37.0.cilium.base","result":"PASS","duration":429097138885,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.7.0-0\n cluster.go:125: [init] Using Kubernetes version: v1.37.1\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: E1021 15:35:13.528924 2012 remote_runtime.go:1359] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.38. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:35:13.653616 2012 checks.go:920] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-239-48-179 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.239.48.179]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 812.69µs\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.239.48.179:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 8.002944ms\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 15.109988ms\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 1.50103142s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-239-48-179 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-239-48-179 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: 8zi633.21hdjgm7r8pkekjh\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the API server kubelet client certificate to access the kubelet API\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.239.48.179:6443 --token 8zi633.21hdjgm7r8pkekjh \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:4730c475f81cf3fa6d2cf81eef993dec916a560732bd212a49c4f9c01901a35d \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: Deployment cilium-operator \n cluster.go:125: DaemonSet cilium \n cluster.go:125: Containers: cilium \n cluster.go:125: cilium-operator \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W1021 15:37:13.614871 1688 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: E1021 15:37:13.630430 1688 remote_runtime.go:1359] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.38. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.37.0.cilium.base/node_readiness (13.85s)\n --- PASS: kubeadm.v1.37.0.cilium.base/nginx_deployment (8.85s)\n --- PASS: kubeadm.v1.37.0.cilium.base/NFS_deployment (18.40s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.37.0.cilium.base/IPSec_encryption (22.11s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"cl.ignition.kargs","result":"PASS","duration":135817432430,"output":" cluster.go:152: + cat /proc/cmdline\n"},{"name":"coreos.ignition.sethostname","result":"PASS","duration":118500772963,"output":""},{"name":"coreos.ignition.resource.remote","result":"PASS","duration":116978570221,"output":""},{"name":"coreos.ignition.once","result":"PASS","duration":190037878708,"output":""},{"name":"kubeadm.v1.35.1.flannel.cgroupv1.base/node_readiness","result":"PASS","duration":13847344700,"output":""},{"name":"kubeadm.v1.35.1.flannel.cgroupv1.base/nginx_deployment","result":"PASS","duration":8782062034,"output":""},{"name":"kubeadm.v1.35.1.flannel.cgroupv1.base/NFS_deployment","result":"PASS","duration":18232479219,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.flannel.cgroupv1.base","result":"PASS","duration":403054666019,"output":" cluster.go:125: I1021 15:41:02.304809 1912 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: I1021 15:41:11.889627 2129 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [init] Using Kubernetes version: v1.35.9\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: [preflight] The system verification failed. Printing the output from the verification:\n cluster.go:125: \u001b[0;37mKERNEL_VERSION\u001b[0m: \u001b[0;32m6.6.159-flatcar\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NAMESPACES\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NET_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_PID_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_IPC_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_UTS_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CPUSETS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_MEMCG\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_INET\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_EXT4_FS\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_PROC_FS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NETFILTER_XT_TARGET_REDIRECT\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NETFILTER_XT_MATCH_COMMENT\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_FAIR_GROUP_SCHED\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUPS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_CPUACCT\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_DEVICE\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_FREEZER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_PIDS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_SCHED\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_OVERLAY_FS\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_AUFS_FS\u001b[0m: \u001b[0;33mnot set - Required for aufs.\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_BLK_DEV_DM\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CFS_BANDWIDTH\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_SECCOMP\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_SECCOMP_FILTER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mOS\u001b[0m: \u001b[0;32mLinux\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPU\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPUACCT\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPUSET\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_DEVICES\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_FREEZER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_MEMORY\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_PIDS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_HUGETLB\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_BLKIO\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is deprecated and will be removed in a future release. Please migrate to cgroups v2. To explicitly enable cgroups v1 support for kubelet v1.35 or newer, you must set the kubelet configuration option 'FailCgroupV1' to 'false'. You must also explicitly skip this validation. For more information, see https://git.k8s.io/enhancements/keps/sig-node/5573-remove-cgroup-v1\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:41:12.082757 2129 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-239-48-155 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.239.48.155]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 501.2647ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.239.48.155:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.01578744s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.91376882s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 4.50257344s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-239-48-155 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-239-48-155 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: 4gf8ww.rijinc1mc6d7ag8u\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.239.48.155:6443 --token 4gf8ww.rijinc1mc6d7ag8u \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:b27dd09cd4ec94c836cad0031b66bab1c80c0fe7be8e99b69adfab9b3f6da129 \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W1021 15:43:19.956605 1786 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is deprecated and will be removed in a future release. Please migrate to cgroups v2. To explicitly enable cgroups v1 support for kubelet v1.35 or newer, you must set the kubelet configuration option 'FailCgroupV1' to 'false'. You must also explicitly skip this validation. For more information, see https://git.k8s.io/enhancements/keps/sig-node/5573-remove-cgroup-v1\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.flannel.cgroupv1.base/node_readiness (13.85s)\n --- PASS: kubeadm.v1.35.1.flannel.cgroupv1.base/nginx_deployment (8.78s)\n --- PASS: kubeadm.v1.35.1.flannel.cgroupv1.base/NFS_deployment (18.23s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"docker.network-openbsd-nc","result":"FAIL","duration":286429049287,"output":" docker.go:411: creating netcat containers\n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.45MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:697f071d04cd59e438c7e48a711d42cf04a3efc89d88b1c0e3841aa0583bda56 done\n cluster.go:125: #5 naming to docker.io/library/netcat done\n cluster.go:125: #5 DONE 0.0s\n cluster.go:125: #1 [internal] load build definition from Dockerfile\n cluster.go:125: #1 transferring dockerfile: 108B done\n cluster.go:125: #1 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #2 [internal] load .dockerignore\n cluster.go:125: #2 transferring context: 2B done\n cluster.go:125: #2 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #3 [internal] load build context\n cluster.go:125: #3 transferring context: 2.45MB 0.0s done\n cluster.go:125: #3 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #4 [1/1] COPY . /\n cluster.go:125: #4 DONE 0.0s\n cluster.go:125: \n cluster.go:125: #5 exporting to image\n cluster.go:125: #5 exporting layers 0.0s done\n cluster.go:125: #5 writing image sha256:c3a98eef948973ff0f4d34e6a23061ee4913992b680929b2337db70e24772276 done\n cluster.go:125: #5 naming to docker.io/library/netcat done\n cluster.go:125: #5 DONE 0.0s\n docker.go:469: [0] Process exited with status 124 [1] Process exited with status 1\n"},{"name":"kubeadm.v1.35.1.calico.cgroupv1.base/node_readiness","result":"PASS","duration":13919252918,"output":""},{"name":"kubeadm.v1.35.1.calico.cgroupv1.base/nginx_deployment","result":"PASS","duration":8960487878,"output":""},{"name":"kubeadm.v1.35.1.calico.cgroupv1.base/NFS_deployment","result":"PASS","duration":18437796596,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.calico.cgroupv1.base","result":"PASS","duration":413172839727,"output":" cluster.go:125: I1021 15:42:57.942004 1966 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: I1021 15:43:07.961633 2182 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [init] Using Kubernetes version: v1.35.9\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: [preflight] The system verification failed. Printing the output from the verification:\n cluster.go:125: \u001b[0;37mKERNEL_VERSION\u001b[0m: \u001b[0;32m6.6.159-flatcar\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NAMESPACES\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NET_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_PID_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_IPC_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_UTS_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CPUSETS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_MEMCG\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_INET\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_EXT4_FS\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_PROC_FS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NETFILTER_XT_TARGET_REDIRECT\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NETFILTER_XT_MATCH_COMMENT\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_FAIR_GROUP_SCHED\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUPS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_CPUACCT\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_DEVICE\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_FREEZER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_PIDS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_SCHED\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_OVERLAY_FS\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_AUFS_FS\u001b[0m: \u001b[0;33mnot set - Required for aufs.\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_BLK_DEV_DM\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CFS_BANDWIDTH\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_SECCOMP\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_SECCOMP_FILTER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mOS\u001b[0m: \u001b[0;32mLinux\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPU\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPUACCT\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPUSET\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_DEVICES\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_FREEZER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_MEMORY\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_PIDS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_HUGETLB\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_BLKIO\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is deprecated and will be removed in a future release. Please migrate to cgroups v2. To explicitly enable cgroups v1 support for kubelet v1.35 or newer, you must set the kubelet configuration option 'FailCgroupV1' to 'false'. You must also explicitly skip this validation. For more information, see https://git.k8s.io/enhancements/keps/sig-node/5573-remove-cgroup-v1\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:43:08.169884 2182 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-237-131-103 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.237.131.103]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.00079788s\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.237.131.103:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.009392734s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.52057149s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 4.000964659s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-237-131-103 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-237-131-103 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: f9uh7k.z9ffxupb72mkusiw\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.237.131.103:6443 --token f9uh7k.z9ffxupb72mkusiw \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:d206596e6e0c3ab7005528a255747c8bac0f0af0dfe9292fbb35c04c5bd472ff \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W1021 15:45:08.310193 1827 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is deprecated and will be removed in a future release. Please migrate to cgroups v2. To explicitly enable cgroups v1 support for kubelet v1.35 or newer, you must set the kubelet configuration option 'FailCgroupV1' to 'false'. You must also explicitly skip this validation. For more information, see https://git.k8s.io/enhancements/keps/sig-node/5573-remove-cgroup-v1\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.calico.cgroupv1.base/node_readiness (13.92s)\n --- PASS: kubeadm.v1.35.1.calico.cgroupv1.base/nginx_deployment (8.96s)\n --- PASS: kubeadm.v1.35.1.calico.cgroupv1.base/NFS_deployment (18.44s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.flannel.base/node_readiness","result":"PASS","duration":7526675322,"output":""},{"name":"coreos.ignition.security.tls","result":"PASS","duration":243268652915,"output":""},{"name":"kubeadm.v1.35.1.flannel.base/nginx_deployment","result":"PASS","duration":8758628259,"output":""},{"name":"kubeadm.v1.35.1.flannel.base/NFS_deployment","result":"PASS","duration":18292341464,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.flannel.base","result":"PASS","duration":402111020221,"output":" cluster.go:125: I1021 15:46:49.382692 1793 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: I1021 15:46:58.863317 2005 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [init] Using Kubernetes version: v1.35.9\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:46:59.046655 2005 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-239-48-158 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.239.48.158]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 501.89442ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.239.48.158:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.0055506s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.42652661s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 4.00152361s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-239-48-158 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-239-48-158 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: peox7h.xh3y2i6z9anzy2gr\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.239.48.158:6443 --token peox7h.xh3y2i6z9anzy2gr \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:5a87127281057a3861d2eade3067ced41931f624819139a269496923fd113777 \n cluster.go:125: namespace/kube-flannel created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n cluster.go:125: serviceaccount/flannel created\n cluster.go:125: configmap/kube-flannel-cfg created\n cluster.go:125: daemonset.apps/kube-flannel-ds created\n cluster.go:125: W1021 15:48:55.960273 1651 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.flannel.base/node_readiness (7.53s)\n --- PASS: kubeadm.v1.35.1.flannel.base/nginx_deployment (8.76s)\n --- PASS: kubeadm.v1.35.1.flannel.base/NFS_deployment (18.29s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.calico.base/node_readiness","result":"PASS","duration":13965796670,"output":""},{"name":"kubeadm.v1.35.1.calico.base/nginx_deployment","result":"PASS","duration":8972913195,"output":""},{"name":"kubeadm.v1.35.1.calico.base/NFS_deployment","result":"PASS","duration":18628228106,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.calico.base","result":"PASS","duration":430424338745,"output":" cluster.go:125: I1021 15:48:00.701687 1833 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: I1021 15:48:12.863259 2060 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [init] Using Kubernetes version: v1.35.9\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:48:13.082198 2060 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-237-158-44 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.237.158.44]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 501.624161ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.237.158.44:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.511062525s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.470090624s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.008774876s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-237-158-44 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-237-158-44 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: eptr9k.cyij9eia02cfiaov\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.237.158.44:6443 --token eptr9k.cyij9eia02cfiaov \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:fbb778faf91c8b1c64d24ef64c43f1c0837b08ed40cac17e0882486b1e29363f \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W1021 15:50:30.345432 1688 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.calico.base/node_readiness (13.97s)\n --- PASS: kubeadm.v1.35.1.calico.base/nginx_deployment (8.97s)\n --- PASS: kubeadm.v1.35.1.calico.base/NFS_deployment (18.63s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.36.1.calico.base/node_readiness","result":"PASS","duration":13781136756,"output":""},{"name":"kubeadm.v1.36.1.calico.base/nginx_deployment","result":"PASS","duration":8748862330,"output":""},{"name":"kubeadm.v1.36.1.calico.base/NFS_deployment","result":"PASS","duration":18439219781,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.36.1.calico.base","result":"PASS","duration":412699697629,"output":" cluster.go:125: I1021 15:49:33.981300 1843 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.36\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.8-0\n cluster.go:125: I1021 15:49:43.969327 2075 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.36\n cluster.go:125: [init] Using Kubernetes version: v1.36.5\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: E1021 15:49:44.023500 2075 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:49:44.203169 2075 checks.go:907] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-234-23-55 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.234.23.55]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.124261ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.234.23.55:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 10.988035ms\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 16.859798ms\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 1.50160412s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-234-23-55 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-234-23-55 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: s19tx8.kl2fbxziwb57ih5x\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the API server kubelet client certificate to access the kubelet API\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.234.23.55:6443 --token s19tx8.kl2fbxziwb57ih5x \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:7afb3af175865bd53036ef9c9635f930477cc431bd06ae427d8037060a1da386 \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W1021 15:52:00.763981 1682 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: E1021 15:52:00.785832 1682 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: W1021 15:52:00.993654 1682 utils.go:69] The recommended value for \"bindAddress\" in \"KubeProxyConfiguration\" is: ::; the provided value is: 0.0.0.0\n --- PASS: kubeadm.v1.36.1.calico.base/node_readiness (13.78s)\n --- PASS: kubeadm.v1.36.1.calico.base/nginx_deployment (8.75s)\n --- PASS: kubeadm.v1.36.1.calico.base/NFS_deployment (18.44s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.network.initramfs.second-boot","result":"PASS","duration":232465973404,"output":""},{"name":"cl.etcd-member.discovery","result":"PASS","duration":139337533989,"output":""},{"name":"kubeadm.v1.35.1.cilium.cgroupv1.base/node_readiness","result":"PASS","duration":19952632782,"output":""},{"name":"kubeadm.v1.35.1.cilium.cgroupv1.base/nginx_deployment","result":"PASS","duration":8747164809,"output":""},{"name":"kubeadm.v1.35.1.cilium.cgroupv1.base/NFS_deployment","result":"PASS","duration":17935588700,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.cilium.cgroupv1.base/IPSec_encryption","result":"PASS","duration":22127951300,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.35.1.cilium.cgroupv1.base","result":"PASS","duration":422346036100,"output":" cluster.go:125: I1021 15:52:39.255641 1971 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: I1021 15:52:47.064301 2183 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [init] Using Kubernetes version: v1.35.9\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: [preflight] The system verification failed. Printing the output from the verification:\n cluster.go:125: \u001b[0;37mKERNEL_VERSION\u001b[0m: \u001b[0;32m6.6.159-flatcar\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NAMESPACES\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NET_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_PID_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_IPC_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_UTS_NS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CPUSETS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_MEMCG\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_INET\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_EXT4_FS\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_PROC_FS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NETFILTER_XT_TARGET_REDIRECT\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_NETFILTER_XT_MATCH_COMMENT\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_FAIR_GROUP_SCHED\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUPS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_CPUACCT\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_DEVICE\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_FREEZER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_PIDS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CGROUP_SCHED\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_OVERLAY_FS\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_AUFS_FS\u001b[0m: \u001b[0;33mnot set - Required for aufs.\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_BLK_DEV_DM\u001b[0m: \u001b[0;32menabled (as module)\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_CFS_BANDWIDTH\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_SECCOMP\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCONFIG_SECCOMP_FILTER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mOS\u001b[0m: \u001b[0;32mLinux\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPU\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPUACCT\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_CPUSET\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_DEVICES\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_FREEZER\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_MEMORY\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_PIDS\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_HUGETLB\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \u001b[0;37mCGROUPS_BLKIO\u001b[0m: \u001b[0;32menabled\u001b[0m\n cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is deprecated and will be removed in a future release. Please migrate to cgroups v2. To explicitly enable cgroups v1 support for kubelet v1.35 or newer, you must set the kubelet configuration option 'FailCgroupV1' to 'false'. You must also explicitly skip this validation. For more information, see https://git.k8s.io/enhancements/keps/sig-node/5573-remove-cgroup-v1\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:52:47.213891 2183 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-236-109-197 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.236.109.197]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 501.860891ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.236.109.197:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.009003423s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 2.244304311s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 4.002013859s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-236-109-197 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-236-109-197 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: 2mkg4o.dwm29sr858xb2ga3\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.236.109.197:6443 --token 2mkg4o.dwm29sr858xb2ga3 \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:c64b9c967ceeddab36e950158b787a5031fd22f57c02610c2aff6074734d647f \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: Deployment cilium-operator \n cluster.go:125: DaemonSet cilium \n cluster.go:125: Containers: cilium \n cluster.go:125: cilium-operator \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W1021 15:54:56.075086 1830 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is deprecated and will be removed in a future release. Please migrate to cgroups v2. To explicitly enable cgroups v1 support for kubelet v1.35 or newer, you must set the kubelet configuration option 'FailCgroupV1' to 'false'. You must also explicitly skip this validation. For more information, see https://git.k8s.io/enhancements/keps/sig-node/5573-remove-cgroup-v1\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.cilium.cgroupv1.base/node_readiness (19.95s)\n --- PASS: kubeadm.v1.35.1.cilium.cgroupv1.base/nginx_deployment (8.75s)\n --- PASS: kubeadm.v1.35.1.cilium.cgroupv1.base/NFS_deployment (17.94s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.35.1.cilium.cgroupv1.base/IPSec_encryption (22.13s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.36.1.cilium.base/node_readiness","result":"PASS","duration":13642923764,"output":""},{"name":"kubeadm.v1.36.1.cilium.base/nginx_deployment","result":"PASS","duration":14894220918,"output":""},{"name":"kubeadm.v1.36.1.cilium.base/NFS_deployment","result":"PASS","duration":17909753616,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.36.1.cilium.base/IPSec_encryption","result":"PASS","duration":19532970823,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.36.1.cilium.base","result":"PASS","duration":428429480646,"output":" cluster.go:125: I1021 15:55:12.337493 1834 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.36\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.8-0\n cluster.go:125: I1021 15:55:21.336643 2061 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.36\n cluster.go:125: [init] Using Kubernetes version: v1.36.5\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: E1021 15:55:21.365958 2061 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:55:21.478174 2061 checks.go:907] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-239-48-155 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.239.48.155]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 1.723231ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.239.48.155:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 6.470774ms\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 9.161114ms\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 1.50093186s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-239-48-155 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-239-48-155 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: wi4v9t.t79ysefyxf1j4arm\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the API server kubelet client certificate to access the kubelet API\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.239.48.155:6443 --token wi4v9t.t79ysefyxf1j4arm \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:d7caedc83b46c5a92c2b61d7ae28c799e6f4b4cdad67d98f8890878f3910bcac \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: Deployment cilium-operator \n cluster.go:125: DaemonSet cilium \n cluster.go:125: Containers: cilium \n cluster.go:125: cilium-operator \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W1021 15:57:13.909774 1694 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: E1021 15:57:13.922556 1694 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: W1021 15:57:14.118492 1694 utils.go:69] The recommended value for \"bindAddress\" in \"KubeProxyConfiguration\" is: ::; the provided value is: 0.0.0.0\n --- PASS: kubeadm.v1.36.1.cilium.base/node_readiness (13.64s)\n --- PASS: kubeadm.v1.36.1.cilium.base/nginx_deployment (14.89s)\n --- PASS: kubeadm.v1.36.1.cilium.base/NFS_deployment (17.91s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.36.1.cilium.base/IPSec_encryption (19.53s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.36.1.flannel.base","result":"FAIL","duration":346935511995,"output":" cluster.go:125: I1021 15:57:58.311886 1786 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.36\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.36.5\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.8-0\n cluster.go:125: I1021 15:58:09.623131 2017 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.36\n cluster.go:125: [init] Using Kubernetes version: v1.36.5\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: E1021 15:58:09.655195 2017 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:58:09.792191 2017 checks.go:907] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-237-129-15 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.237.129.15]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: error: error execution phase wait-control-plane: cannot obtain client without bootstrap: could not bootstrap the admin user in file admin.conf: unable to create ClusterRoleBinding: Post \"https://172.237.129.15:6443/apis/rbac.authorization.k8s.io/v1/clusterrolebindings?timeout=10s\": context deadline exceeded\n cluster.go:125: To see the stack trace of this error execute with --v=5 or higher\n kubeadm.go:197: unable to setup cluster: unable to run master script: Process exited with status 1\n"},{"name":"coreos.ignition.resource.local","result":"PASS","duration":234131254201,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/node_readiness","result":"PASS","duration":20204522052,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/nginx_deployment","result":"PASS","duration":15246842907,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/NFS_deployment","result":"PASS","duration":18332257448,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.cilium.base/IPSec_encryption","result":"PASS","duration":22414149629,"output":" cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"cl.flannel.vxlan","result":"PASS","duration":156499333225,"output":" flannel.go:121: ping from 108791562(10.254.97.0) to 108791567(10.254.94.0)\n"},{"name":"kubeadm.v1.35.1.cilium.base","result":"PASS","duration":407095276386,"output":" cluster.go:125: I1021 15:58:33.900213 1847 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.9\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n cluster.go:125: I1021 15:58:47.068745 2082 version.go:260] remote version is much newer: v1.37.1; falling back to: stable-1.35\n cluster.go:125: [init] Using Kubernetes version: v1.35.9\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 15:58:47.347101 2082 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-234-23-25 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.234.23.25]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 502.923561ms\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.234.23.25:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.518548099s\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 4.00849911s\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.501769723s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-234-23-25 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-234-23-25 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: ubetws.jyfy0o0rxoiem06y\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.234.23.25:6443 --token ubetws.jyfy0o0rxoiem06y \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:ba4027855471c9df206facb30accea8069029837412e43bf1daaf466986aac84 \n cluster.go:125: i Using Cilium version 1.12.5\n cluster.go:125: ? Auto-detected cluster name: kubernetes\n cluster.go:125: ? Auto-detected datapath mode: tunnel\n cluster.go:125: ? Auto-detected kube-proxy has been installed\n cluster.go:125: i helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n cluster.go:125: i Storing helm values file in kube-system/cilium-cli-helm-values Secret\n cluster.go:125: ? Created CA in secret cilium-ca\n cluster.go:125: ? Generating certificates for Hubble...\n cluster.go:125: ? Creating Service accounts...\n cluster.go:125: ? Creating Cluster roles...\n cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n cluster.go:125: i Manual overwrite in ConfigMap: enable-endpoint-routes=true\n cluster.go:125: i Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n cluster.go:125: ? Creating Agent DaemonSet...\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: ? Creating Operator Deployment...\n cluster.go:125: ? Waiting for Cilium to be installed and ready...\n cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n cluster.go:125: \u001b[33m /??\\\n cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m Cilium: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m Operator: \u001b[32mOK\u001b[0m\n cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m Hubble: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m ClusterMesh: \u001b[36mdisabled\u001b[0m\n cluster.go:125: \u001b[34m \\__/\n cluster.go:125: \u001b[0m\n cluster.go:125: DaemonSet cilium \n cluster.go:125: Deployment cilium-operator \n cluster.go:125: Containers: cilium-operator \n cluster.go:125: cilium \n cluster.go:125: Cluster Pods: 0/0 managed by Cilium\n cluster.go:125: W1021 16:00:32.715190 1682 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.35.1.cilium.base/node_readiness (20.20s)\n --- PASS: kubeadm.v1.35.1.cilium.base/nginx_deployment (15.25s)\n --- PASS: kubeadm.v1.35.1.cilium.base/NFS_deployment (18.33s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n --- PASS: kubeadm.v1.35.1.cilium.base/IPSec_encryption (22.41s)\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"cl.internet/DockerPing","result":"PASS","duration":8540137141,"output":""},{"name":"cl.internet/DockerEcho","result":"PASS","duration":1604320298,"output":""},{"name":"cl.internet/NTPDate","result":"PASS","duration":8140407893,"output":""},{"name":"cl.internet/UpdateEngine","result":"PASS","duration":1183947338,"output":""},{"name":"cl.internet","result":"PASS","duration":146525245432,"output":" --- PASS: cl.internet/DockerPing (8.54s)\n --- PASS: cl.internet/DockerEcho (1.60s)\n --- PASS: cl.internet/NTPDate (8.14s)\n --- PASS: cl.internet/UpdateEngine (1.18s)\n"},{"name":"kubeadm.v1.37.0.calico.base/node_readiness","result":"PASS","duration":13651061141,"output":""},{"name":"kubeadm.v1.37.0.calico.base/nginx_deployment","result":"PASS","duration":8742055175,"output":""},{"name":"kubeadm.v1.37.0.calico.base/NFS_deployment","result":"PASS","duration":30793983770,"output":" cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.37.0.calico.base","result":"PASS","duration":422608000138,"output":" cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.37.1\n cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.6\n cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.7.0-0\n cluster.go:125: [init] Using Kubernetes version: v1.37.1\n cluster.go:125: [preflight] Running pre-flight checks\n cluster.go:125: E1021 16:02:16.556682 2029 remote_runtime.go:1359] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.38. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n cluster.go:125: W1021 16:02:16.672472 2029 checks.go:920] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n cluster.go:125: [certs] Generating \"ca\" certificate and key\n cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n cluster.go:125: [certs] apiserver serving cert is signed for DNS names [172-234-23-55 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.234.23.55]\n cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n cluster.go:125: [certs] Generating \"sa\" key and public key\n cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n cluster.go:125: [kubelet-start] Starting the kubelet\n cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n cluster.go:125: [kubelet-check] The kubelet is healthy after 644.191µs\n cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n cluster.go:125: [control-plane-check] Checking kube-apiserver at https://172.234.23.55:6443/livez\n cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 4.021544ms\n cluster.go:125: [control-plane-check] kube-scheduler is healthy after 7.344967ms\n cluster.go:125: [control-plane-check] kube-apiserver is healthy after 1.50091105s\n cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n cluster.go:125: [mark-control-plane] Marking the node 172-234-23-55 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n cluster.go:125: [mark-control-plane] Marking the node 172-234-23-55 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n cluster.go:125: [bootstrap-token] Using token: ncen5o.v2fe43mgojknp3id\n cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the API server kubelet client certificate to access the kubelet API\n cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n cluster.go:125: [addons] Applied essential addon: CoreDNS\n cluster.go:125: [addons] Applied essential addon: kube-proxy\n cluster.go:125: \n cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n cluster.go:125: \n cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n cluster.go:125: \n cluster.go:125: mkdir -p $HOME/.kube\n cluster.go:125: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n cluster.go:125: sudo chown $(id -u):$(id -g) $HOME/.kube/config\n cluster.go:125: \n cluster.go:125: Alternatively, if you are the root user, you can run:\n cluster.go:125: \n cluster.go:125: export KUBECONFIG=/etc/kubernetes/admin.conf\n cluster.go:125: \n cluster.go:125: You should now deploy a pod network to the cluster.\n cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n cluster.go:125: https://kubernetes.io/docs/concepts/cluster-administration/addons/\n cluster.go:125: \n cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n cluster.go:125: \n cluster.go:125: kubeadm join 172.234.23.55:6443 --token ncen5o.v2fe43mgojknp3id \\\n cluster.go:125: \t--discovery-token-ca-cert-hash sha256:bbcda4b8261f8bd72210eb1bd45093a773b4d1669cb0796571b6c875f3a06d47 \n cluster.go:125: namespace/tigera-operator created\n cluster.go:125: serviceaccount/tigera-operator created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n cluster.go:125: deployment.apps/tigera-operator created\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n cluster.go:125: installation.operator.tigera.io/default created\n cluster.go:125: apiserver.operator.tigera.io/default created\n cluster.go:125: goldmane.operator.tigera.io/default created\n cluster.go:125: whisker.operator.tigera.io/default created\n cluster.go:125: W1021 16:04:29.606995 1690 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n cluster.go:125: E1021 16:04:29.621719 1690 remote_runtime.go:1359] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.38. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n --- PASS: kubeadm.v1.37.0.calico.base/node_readiness (13.65s)\n --- PASS: kubeadm.v1.37.0.calico.base/nginx_deployment (8.74s)\n --- PASS: kubeadm.v1.37.0.calico.base/NFS_deployment (30.79s)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"linux.nfs.v4","result":"PASS","duration":235904989506,"output":" nfs.go:80: NFS server booted.\n nfs.go:85: Test file \"/tmp/tmp.Oyv6RBm7R8\" created on server.\n nfs.go:125: NFS client booted.\n nfs.go:133: Got NFS mount.\n"},{"name":"linux.nfs.v3","result":"PASS","duration":233886907766,"output":" nfs.go:80: NFS server booted.\n nfs.go:85: Test file \"/tmp/tmp.apewG8xVg1\" created on server.\n nfs.go:125: NFS client booted.\n nfs.go:133: Got NFS mount.\n"}],"result":"FAIL","platform":"akamai","version":"4081.3.11"}