{"tests":[{"name":"docker.base/docker-info","result":"PASS","duration":4347242353,"output":""},{"name":"bpf.ig/ig","result":"FAIL","duration":95866461954,"output":"        cluster.go:125: + sudo ig run trace_exec:v0.50.0 --help\n        cluster.go:125: time=\"2026-09-04T02:19:27Z\" level=warning msg=\"Failed to create container-collection\"\n        cluster.go:125: + trap 'kill %%' ERR\n        cluster.go:125: + timeout 30 grep -F -m1 running...\n        cluster.go:125: + sudo ig run trace_exec:v0.50.0 --host --filter proc.comm=docker,args~ps --output json --verbose\n        cluster.go:125: ++ kill %%\n        cluster.go:125: bash: line 6: kill: %%: no such job\n        ig.go:79: ig run trace_exec did not behave as expected: Process exited with status 1\n"},{"name":"docker.lib-coreos-dockerd-compat/docker-info","result":"PASS","duration":4821913070,"output":""},{"name":"sysext.disable-containerd","result":"PASS","duration":96920193898,"output":""},{"name":"cl.network.iptables","result":"PASS","duration":97200534072,"output":"        cluster.go:152: + sudo nft --json list ruleset | jq '.nftables[] | select(.rule) | .rule.expr[0].match.right'\n"},{"name":"coreos.ignition.systemd.enable-service","result":"PASS","duration":97678704705,"output":""},{"name":"bpf.ig","result":"FAIL","duration":98538576850,"output":"    --- FAIL: bpf.ig/ig (95.87s)\n            cluster.go:125: + sudo ig run trace_exec:v0.50.0 --help\n            cluster.go:125: time=\"2026-09-04T02:19:27Z\" level=warning msg=\"Failed to create container-collection\"\n            cluster.go:125: + trap 'kill %%' ERR\n            cluster.go:125: + timeout 30 grep -F -m1 running...\n            cluster.go:125: + sudo ig run trace_exec:v0.50.0 --host --filter proc.comm=docker,args~ps --output json --verbose\n            cluster.go:125: ++ kill %%\n            cluster.go:125: bash: line 6: kill: %%: no such job\n            ig.go:79: ig run trace_exec did not behave as expected: Process exited with status 1\n"},{"name":"azure.nvme-friendly-naming","result":"SKIP","duration":98896311748,"output":"        cluster.go:125: ls: cannot access '/dev/nvme0n1': No such file or directory\n        nvme.go:47: no NVMe disk found on this instance\n"},{"name":"docker.btrfs-storage","result":"PASS","duration":100633754984,"output":""},{"name":"docker.base/resources","result":"PASS","duration":10194687650,"output":"        cluster.go:125: #1 [internal] load build definition from Dockerfile\n        cluster.go:125: #1 transferring dockerfile: 108B done\n        cluster.go:125: #1 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #2 [internal] load .dockerignore\n        cluster.go:125: #2 transferring context:\n        cluster.go:125: #2 transferring context: 2B done\n        cluster.go:125: #2 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #3 [internal] load build context\n        cluster.go:125: #3 transferring context: 2.19MB 0.0s done\n        cluster.go:125: #3 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #4 [1/1] COPY . /\n        cluster.go:125: #4 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #5 exporting to image\n        cluster.go:125: #5 exporting layers 0.0s done\n        cluster.go:125: #5 writing image sha256:68e1715712936b52db579fdd840019712e7af832ab740483e963491799ee9812 done\n        cluster.go:125: #5 naming to docker.io/library/sleep done\n        cluster.go:125: #5 DONE 0.1s\n        cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n        cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n"},{"name":"docker.lib-coreos-dockerd-compat/resources","result":"PASS","duration":10771624722,"output":"        cluster.go:125: #1 [internal] load build definition from Dockerfile\n        cluster.go:125: #1 transferring dockerfile: 108B done\n        cluster.go:125: #1 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #2 [internal] load .dockerignore\n        cluster.go:125: #2 transferring context:\n        cluster.go:125: #2 transferring context: 2B done\n        cluster.go:125: #2 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #3 [internal] load build context\n        cluster.go:125: #3 transferring context: 2.19MB 0.0s done\n        cluster.go:125: #3 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #4 [1/1] COPY . /\n        cluster.go:125: #4 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #5 exporting to image\n        cluster.go:125: #5 exporting layers 0.1s done\n        cluster.go:125: #5 writing image sha256:f01af943ec5437e5b1bb72cc65b962176b7200f5b31c4faa8fe1353a02dd575c done\n        cluster.go:125: #5 naming to docker.io/library/sleep 0.0s done\n        cluster.go:125: #5 DONE 0.1s\n        cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n        cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n"},{"name":"cl.ignition.kargs","result":"PASS","duration":126224775214,"output":"        cluster.go:152: + cat /proc/cmdline\n"},{"name":"cl.ignition.v2_1.vfat","result":"PASS","duration":128219577317,"output":""},{"name":"cl.etcd-member.v2-backup-restore","result":"PASS","duration":130634299482,"output":"        cluster.go:125: 2026-09-04T02:20:00Z\tinfo\tetcdutl/backup_command.go:216\tignoring EntryConfChange raft entry\n        cluster.go:125: 2026-09-04T02:20:00Z\tinfo\tetcdutl/backup_command.go:231\tignoring member attribute update on\t{\"entry\": \"Term:2 Index:3 Data:\\\"\\\\010\\\\202\\\\354\\\\326\\\\266\\\\243\\\\215\\\\350\\\\223s\\\\022\\\\003PUT\\\\032%/0/members/17f39624baa7327/attributes\\\\\\\"Q{\\\\\\\"name\\\\\\\":\\\\\\\"326fc28b2a45495eba8b05797e1a2486\\\\\\\",\\\\\\\"clientURLs\\\\\\\":[\\\\\\\"http://10.0.0.8:2379\\\\\\\"]}(\\\\0002\\\\0008\\\\000H\\\\000P\\\\000X\\\\000`\\\\000h\\\\000p\\\\000x\\\\000\\\\200\\\\001\\\\000\\\" \", \"v2Req.Path\": \"/0/members/17f39624baa7327/attributes\"}\n        cluster.go:125: 2026-09-04T02:20:00Z\tinfo\tetcdutl/backup_command.go:252\tignoring v3 raft entry\n        cluster.go:125: 2026-09-04T02:20:00Z\tinfo\tmembership/store.go:119\tTrimming membership information from the backend...\n"},{"name":"cl.ignition.translation","result":"PASS","duration":131895456437,"output":"        cluster.go:152: + ip --json address show kola | jq -r '.[] | .addr_info | .[] | select( .family == \"inet\") | .local'\n        cluster.go:152: + cat /etc/systemd/network/00-dummy.network\n"},{"name":"sysext.custom-docker.sysext","result":"PASS","duration":150702366681,"output":"        cluster.go:125: bash: line 1: docker: command not found\n        cluster.go:125: Cloning into 'sysext-bakery'...\n        cluster.go:125: Note: switching to '9850ffd5b2353f45a9b3bf4fb84f8138a149e3e7'.\n        cluster.go:125: \n        cluster.go:125: You are in 'detached HEAD' state. You can look around, make experimental\n        cluster.go:125: changes and commit them, and you can discard any commits you make in this\n        cluster.go:125: state without impacting any branches by switching back to a branch.\n        cluster.go:125: \n        cluster.go:125: If you want to create a new branch to retain commits you create, you may\n        cluster.go:125: do so (now or later) by using -c with the switch command. Example:\n        cluster.go:125: \n        cluster.go:125:   git switch -c \u003cnew-branch-name\u003e\n        cluster.go:125: \n        cluster.go:125: Or undo this operation with:\n        cluster.go:125: \n        cluster.go:125:   git switch -\n        cluster.go:125: \n        cluster.go:125: Turn off this advice by setting config variable advice.detachedHead to false\n        cluster.go:125: \n        cluster.go:125: HEAD is now at 9850ffd Merge pull request #31 from flatcar/t-lo/fix-docker-23-containerd-shim\n        cluster.go:125: mke2fs 1.47.1 (20-May-2024)\n        cluster.go:125: resize2fs 1.47.1 (20-May-2024)\n        cluster.go:125: mke2fs 1.47.1 (20-May-2024)\n        cluster.go:125: resize2fs 1.47.1 (20-May-2024)\n        cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n        cluster.go:125: latest: Pulling from flatcar/busybox\n        cluster.go:125: dbc3eadfebd7: Pulling fs layer\n        cluster.go:125: dbc3eadfebd7: Verifying Checksum\n        cluster.go:125: dbc3eadfebd7: Download complete\n        cluster.go:125: dbc3eadfebd7: Pull complete\n        cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n        cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n        cluster.go:125: mke2fs 1.47.1 (20-May-2024)\n        cluster.go:125: resize2fs 1.47.1 (20-May-2024)\n        cluster.go:125: mke2fs 1.47.1 (20-May-2024)\n        cluster.go:125: resize2fs 1.47.1 (20-May-2024)\n"},{"name":"docker.network-openbsd-nc","result":"PASS","duration":150754304142,"output":"        docker.go:411: creating netcat containers\n        cluster.go:125: #1 [internal] load build definition from Dockerfile\n        cluster.go:125: #1 transferring dockerfile: 108B done\n        cluster.go:125: #1 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #2 [internal] load .dockerignore\n        cluster.go:125: #2 transferring context:\n        cluster.go:125: #2 transferring context: 2B done\n        cluster.go:125: #2 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #3 [internal] load build context\n        cluster.go:125: #3 transferring context: 2.53MB 0.0s done\n        cluster.go:125: #3 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #4 [1/1] COPY . /\n        cluster.go:125: #4 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #5 exporting to image\n        cluster.go:125: #5 exporting layers 0.1s done\n        cluster.go:125: #5 writing image sha256:fe317a68a0f316c3f479f2042f3efbff32e52c5172904611996c93e85e110593 done\n        cluster.go:125: #5 naming to docker.io/library/netcat 0.0s done\n        cluster.go:125: #5 DONE 0.1s\n        cluster.go:125: #1 [internal] load build definition from Dockerfile\n        cluster.go:125: #1 transferring dockerfile: 108B done\n        cluster.go:125: #1 DONE 0.4s\n        cluster.go:125: \n        cluster.go:125: #2 [internal] load .dockerignore\n        cluster.go:125: #2 transferring context: 2B done\n        cluster.go:125: #2 DONE 0.3s\n        cluster.go:125: \n        cluster.go:125: #3 [internal] load build context\n        cluster.go:125: #3 transferring context: 2.53MB 0.0s done\n        cluster.go:125: #3 DONE 0.3s\n        cluster.go:125: \n        cluster.go:125: #4 [1/1] COPY . /\n        cluster.go:125: #4 DONE 0.3s\n        cluster.go:125: \n        cluster.go:125: #5 exporting to image\n        cluster.go:125: #5 exporting layers\n        cluster.go:125: #5 exporting layers 0.3s done\n        cluster.go:125: #5 writing image sha256:4ac2a90111096e5afbd504f897f7f9ec75ef41d7940e26a03e2763f08d6b1f7c 0.0s done\n        cluster.go:125: #5 naming to docker.io/library/netcat 0.0s done\n        cluster.go:125: #5 DONE 0.6s\n"},{"name":"cl.update.reboot","result":"PASS","duration":159434733657,"output":""},{"name":"cl.ignition.v2.noop","result":"PASS","duration":95299686069,"output":""},{"name":"cl.verity/verify","result":"PASS","duration":102928043798,"output":"        cluster.go:125: Success\n"},{"name":"cl.ignition.v2_1.ext4checkexisting","result":"PASS","duration":221114075562,"output":""},{"name":"cl.flannel.vxlan","result":"PASS","duration":142306513347,"output":"        flannel.go:121: ping from ci-4081.3.10--442ead09d4(10.254.38.0) to ci-4081.3.10--7277b9e756(10.254.67.0)\n"},{"name":"docker.base/networks-reliably","result":"PASS","duration":143571840082,"output":"        cluster.go:125: #1 [internal] load build definition from Dockerfile\n        cluster.go:125: #1 transferring dockerfile: 108B done\n        cluster.go:125: #1 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #2 [internal] load .dockerignore\n        cluster.go:125: #2 transferring context: 2B done\n        cluster.go:125: #2 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #3 [internal] load build context\n        cluster.go:125: #3 transferring context: 4.16MB 0.0s done\n        cluster.go:125: #3 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #4 [1/1] COPY . /\n        cluster.go:125: #4 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #5 exporting to image\n        cluster.go:125: #5 exporting layers\n        cluster.go:125: #5 exporting layers 0.0s done\n        cluster.go:125: #5 writing image sha256:9aa459f98a8f1e35bbb3223568eeebd0c4e556a9f48ab27eeb4e51314dee83e7 done\n        cluster.go:125: #5 naming to docker.io/library/ping done\n        cluster.go:125: #5 DONE 0.1s\n"},{"name":"cl.ignition.v1.noop","result":"PASS","duration":126040374635,"output":""},{"name":"docker.base/user-no-caps","result":"PASS","duration":4337341145,"output":"        cluster.go:125: #1 [internal] load build definition from Dockerfile\n        cluster.go:125: #1 transferring dockerfile: 108B done\n        cluster.go:125: #1 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #2 [internal] load .dockerignore\n        cluster.go:125: #2 transferring context: 2B done\n        cluster.go:125: #2 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #3 [internal] load build context\n        cluster.go:125: #3 transferring context: 5.22MB 0.0s done\n        cluster.go:125: #3 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #4 [1/1] COPY . /\n        cluster.go:125: #4 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #5 exporting to image\n        cluster.go:125: #5 exporting layers 0.0s done\n        cluster.go:125: #5 writing image sha256:b7552f4d69d95f598570ff08188809b157b240cf7d0e2c9faea56e698c6e7a28 done\n        cluster.go:125: #5 naming to docker.io/library/captest done\n        cluster.go:125: #5 DONE 0.1s\n"},{"name":"docker.enable-service.sysext","result":"PASS","duration":125946863603,"output":"        cluster.go:152: + systemctl is-enabled docker\n"},{"name":"docker.lib-coreos-dockerd-compat/networks-reliably","result":"PASS","duration":151220726368,"output":"        cluster.go:125: #1 [internal] load build definition from Dockerfile\n        cluster.go:125: #1 transferring dockerfile: 108B done\n        cluster.go:125: #1 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #2 [internal] load .dockerignore\n        cluster.go:125: #2 transferring context: 2B done\n        cluster.go:125: #2 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #3 [internal] load build context\n        cluster.go:125: #3 transferring context: 4.16MB 0.0s done\n        cluster.go:125: #3 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #4 [1/1] COPY . /\n        cluster.go:125: #4 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #5 exporting to image\n        cluster.go:125: #5 exporting layers 0.1s done\n        cluster.go:125: #5 writing image sha256:b6f8de3b45d280804d056914d8df2e16ff6764a980065693c2db90917bacaee0 done\n        cluster.go:125: #5 naming to docker.io/library/ping 0.0s done\n        cluster.go:125: #5 DONE 0.1s\n"},{"name":"docker.base/ownership","result":"PASS","duration":8979568529,"output":"        cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n        cluster.go:125: latest: Pulling from flatcar/nginx\n        cluster.go:125: 492b5f090343: Pulling fs layer\n        cluster.go:125: 0fed669acb5d: Pulling fs layer\n        cluster.go:125: e262069eea4f: Pulling fs layer\n        cluster.go:125: f0e6b76bc26b: Pulling fs layer\n        cluster.go:125: b0231c9ece2d: Pulling fs layer\n        cluster.go:125: f4978e9dba23: Pulling fs layer\n        cluster.go:125: ced25bc5fda8: Pulling fs layer\n        cluster.go:125: f0e6b76bc26b: Waiting\n        cluster.go:125: b0231c9ece2d: Waiting\n        cluster.go:125: f4978e9dba23: Waiting\n        cluster.go:125: ced25bc5fda8: Waiting\n        cluster.go:125: e262069eea4f: Verifying Checksum\n        cluster.go:125: e262069eea4f: Download complete\n        cluster.go:125: f0e6b76bc26b: Verifying Checksum\n        cluster.go:125: f0e6b76bc26b: Download complete\n        cluster.go:125: b0231c9ece2d: Download complete\n        cluster.go:125: f4978e9dba23: Verifying Checksum\n        cluster.go:125: f4978e9dba23: Download complete\n        cluster.go:125: 492b5f090343: Verifying Checksum\n        cluster.go:125: 492b5f090343: Download complete\n        cluster.go:125: 0fed669acb5d: Verifying Checksum\n        cluster.go:125: 0fed669acb5d: Download complete\n        cluster.go:125: ced25bc5fda8: Verifying Checksum\n        cluster.go:125: ced25bc5fda8: Download complete\n        cluster.go:125: 492b5f090343: Pull complete\n        cluster.go:125: 0fed669acb5d: Pull complete\n        cluster.go:125: e262069eea4f: Pull complete\n        cluster.go:125: f0e6b76bc26b: Pull complete\n        cluster.go:125: b0231c9ece2d: Pull complete\n        cluster.go:125: f4978e9dba23: Pull complete\n        cluster.go:125: ced25bc5fda8: Pull complete\n        cluster.go:125: Digest: sha256:922a5603984560970f4e265613fdc25077f4826efbaf4a082670f2a86a3849f0\n        cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"docker.lib-coreos-dockerd-compat/user-no-caps","result":"PASS","duration":4493635422,"output":"        cluster.go:125: #1 [internal] load build definition from Dockerfile\n        cluster.go:125: #1 transferring dockerfile: 108B done\n        cluster.go:125: #1 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #2 [internal] load .dockerignore\n        cluster.go:125: #2 transferring context: 2B done\n        cluster.go:125: #2 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #3 [internal] load build context\n        cluster.go:125: #3 transferring context: 5.22MB 0.0s done\n        cluster.go:125: #3 DONE 0.1s\n        cluster.go:125: \n        cluster.go:125: #4 [1/1] COPY . /\n        cluster.go:125: #4 DONE 0.0s\n        cluster.go:125: \n        cluster.go:125: #5 exporting to image\n        cluster.go:125: #5 exporting layers 0.0s done\n        cluster.go:125: #5 writing image sha256:3b124f9e98fcaa8099457def82db9b75da85524568ec4d7cb15548aeb4a0f78b done\n        cluster.go:125: #5 naming to docker.io/library/captest 0.0s done\n        cluster.go:125: #5 DONE 0.1s\n"},{"name":"docker.base","result":"PASS","duration":265608742855,"output":"    --- PASS: docker.base/docker-info (4.35s)\n    --- PASS: docker.base/resources (10.19s)\n            cluster.go:125: #1 [internal] load build definition from Dockerfile\n            cluster.go:125: #1 transferring dockerfile: 108B done\n            cluster.go:125: #1 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #2 [internal] load .dockerignore\n            cluster.go:125: #2 transferring context:\n            cluster.go:125: #2 transferring context: 2B done\n            cluster.go:125: #2 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #3 [internal] load build context\n            cluster.go:125: #3 transferring context: 2.19MB 0.0s done\n            cluster.go:125: #3 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #4 [1/1] COPY . /\n            cluster.go:125: #4 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #5 exporting to image\n            cluster.go:125: #5 exporting layers 0.0s done\n            cluster.go:125: #5 writing image sha256:68e1715712936b52db579fdd840019712e7af832ab740483e963491799ee9812 done\n            cluster.go:125: #5 naming to docker.io/library/sleep done\n            cluster.go:125: #5 DONE 0.1s\n            cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n            cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n    --- PASS: docker.base/networks-reliably (143.57s)\n            cluster.go:125: #1 [internal] load build definition from Dockerfile\n            cluster.go:125: #1 transferring dockerfile: 108B done\n            cluster.go:125: #1 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #2 [internal] load .dockerignore\n            cluster.go:125: #2 transferring context: 2B done\n            cluster.go:125: #2 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #3 [internal] load build context\n            cluster.go:125: #3 transferring context: 4.16MB 0.0s done\n            cluster.go:125: #3 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #4 [1/1] COPY . /\n            cluster.go:125: #4 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #5 exporting to image\n            cluster.go:125: #5 exporting layers\n            cluster.go:125: #5 exporting layers 0.0s done\n            cluster.go:125: #5 writing image sha256:9aa459f98a8f1e35bbb3223568eeebd0c4e556a9f48ab27eeb4e51314dee83e7 done\n            cluster.go:125: #5 naming to docker.io/library/ping done\n            cluster.go:125: #5 DONE 0.1s\n    --- PASS: docker.base/user-no-caps (4.34s)\n            cluster.go:125: #1 [internal] load build definition from Dockerfile\n            cluster.go:125: #1 transferring dockerfile: 108B done\n            cluster.go:125: #1 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #2 [internal] load .dockerignore\n            cluster.go:125: #2 transferring context: 2B done\n            cluster.go:125: #2 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #3 [internal] load build context\n            cluster.go:125: #3 transferring context: 5.22MB 0.0s done\n            cluster.go:125: #3 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #4 [1/1] COPY . /\n            cluster.go:125: #4 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #5 exporting to image\n            cluster.go:125: #5 exporting layers 0.0s done\n            cluster.go:125: #5 writing image sha256:b7552f4d69d95f598570ff08188809b157b240cf7d0e2c9faea56e698c6e7a28 done\n            cluster.go:125: #5 naming to docker.io/library/captest done\n            cluster.go:125: #5 DONE 0.1s\n    --- PASS: docker.base/ownership (8.98s)\n            cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n            cluster.go:125: latest: Pulling from flatcar/nginx\n            cluster.go:125: 492b5f090343: Pulling fs layer\n            cluster.go:125: 0fed669acb5d: Pulling fs layer\n            cluster.go:125: e262069eea4f: Pulling fs layer\n            cluster.go:125: f0e6b76bc26b: Pulling fs layer\n            cluster.go:125: b0231c9ece2d: Pulling fs layer\n            cluster.go:125: f4978e9dba23: Pulling fs layer\n            cluster.go:125: ced25bc5fda8: Pulling fs layer\n            cluster.go:125: f0e6b76bc26b: Waiting\n            cluster.go:125: b0231c9ece2d: Waiting\n            cluster.go:125: f4978e9dba23: Waiting\n            cluster.go:125: ced25bc5fda8: Waiting\n            cluster.go:125: e262069eea4f: Verifying Checksum\n            cluster.go:125: e262069eea4f: Download complete\n            cluster.go:125: f0e6b76bc26b: Verifying Checksum\n            cluster.go:125: f0e6b76bc26b: Download complete\n            cluster.go:125: b0231c9ece2d: Download complete\n            cluster.go:125: f4978e9dba23: Verifying Checksum\n            cluster.go:125: f4978e9dba23: Download complete\n            cluster.go:125: 492b5f090343: Verifying Checksum\n            cluster.go:125: 492b5f090343: Download complete\n            cluster.go:125: 0fed669acb5d: Verifying Checksum\n            cluster.go:125: 0fed669acb5d: Download complete\n            cluster.go:125: ced25bc5fda8: Verifying Checksum\n            cluster.go:125: ced25bc5fda8: Download complete\n            cluster.go:125: 492b5f090343: Pull complete\n            cluster.go:125: 0fed669acb5d: Pull complete\n            cluster.go:125: e262069eea4f: Pull complete\n            cluster.go:125: f0e6b76bc26b: Pull complete\n            cluster.go:125: b0231c9ece2d: Pull complete\n            cluster.go:125: f4978e9dba23: Pull complete\n            cluster.go:125: ced25bc5fda8: Pull complete\n            cluster.go:125: Digest: sha256:922a5603984560970f4e265613fdc25077f4826efbaf4a082670f2a86a3849f0\n            cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"coreos.tls.fetch-urls","result":"PASS","duration":137751758800,"output":""},{"name":"docker.lib-coreos-dockerd-compat/ownership","result":"PASS","duration":8846077728,"output":"        cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n        cluster.go:125: latest: Pulling from flatcar/nginx\n        cluster.go:125: 492b5f090343: Pulling fs layer\n        cluster.go:125: 0fed669acb5d: Pulling fs layer\n        cluster.go:125: e262069eea4f: Pulling fs layer\n        cluster.go:125: f0e6b76bc26b: Pulling fs layer\n        cluster.go:125: b0231c9ece2d: Pulling fs layer\n        cluster.go:125: f4978e9dba23: Pulling fs layer\n        cluster.go:125: ced25bc5fda8: Pulling fs layer\n        cluster.go:125: f0e6b76bc26b: Waiting\n        cluster.go:125: b0231c9ece2d: Waiting\n        cluster.go:125: f4978e9dba23: Waiting\n        cluster.go:125: ced25bc5fda8: Waiting\n        cluster.go:125: e262069eea4f: Verifying Checksum\n        cluster.go:125: e262069eea4f: Download complete\n        cluster.go:125: 492b5f090343: Verifying Checksum\n        cluster.go:125: 492b5f090343: Download complete\n        cluster.go:125: 0fed669acb5d: Verifying Checksum\n        cluster.go:125: 0fed669acb5d: Download complete\n        cluster.go:125: f0e6b76bc26b: Verifying Checksum\n        cluster.go:125: f0e6b76bc26b: Download complete\n        cluster.go:125: b0231c9ece2d: Download complete\n        cluster.go:125: f4978e9dba23: Verifying Checksum\n        cluster.go:125: f4978e9dba23: Download complete\n        cluster.go:125: ced25bc5fda8: Verifying Checksum\n        cluster.go:125: ced25bc5fda8: Download complete\n        cluster.go:125: 492b5f090343: Pull complete\n        cluster.go:125: 0fed669acb5d: Pull complete\n        cluster.go:125: e262069eea4f: Pull complete\n        cluster.go:125: f0e6b76bc26b: Pull complete\n        cluster.go:125: b0231c9ece2d: Pull complete\n        cluster.go:125: f4978e9dba23: Pull complete\n        cluster.go:125: ced25bc5fda8: Pull complete\n        cluster.go:125: Digest: sha256:922a5603984560970f4e265613fdc25077f4826efbaf4a082670f2a86a3849f0\n        cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"docker.lib-coreos-dockerd-compat","result":"PASS","duration":274843238700,"output":"    --- PASS: docker.lib-coreos-dockerd-compat/docker-info (4.82s)\n    --- PASS: docker.lib-coreos-dockerd-compat/resources (10.77s)\n            cluster.go:125: #1 [internal] load build definition from Dockerfile\n            cluster.go:125: #1 transferring dockerfile: 108B done\n            cluster.go:125: #1 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #2 [internal] load .dockerignore\n            cluster.go:125: #2 transferring context:\n            cluster.go:125: #2 transferring context: 2B done\n            cluster.go:125: #2 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #3 [internal] load build context\n            cluster.go:125: #3 transferring context: 2.19MB 0.0s done\n            cluster.go:125: #3 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #4 [1/1] COPY . /\n            cluster.go:125: #4 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #5 exporting to image\n            cluster.go:125: #5 exporting layers 0.1s done\n            cluster.go:125: #5 writing image sha256:f01af943ec5437e5b1bb72cc65b962176b7200f5b31c4faa8fe1353a02dd575c done\n            cluster.go:125: #5 naming to docker.io/library/sleep 0.0s done\n            cluster.go:125: #5 DONE 0.1s\n            cluster.go:125: WARNING: Your kernel does not support OomKillDisable. OomKillDisable discarded.\n            cluster.go:125: WARNING: Your kernel does not support memory swappiness capabilities or the cgroup is not mounted. Memory swappiness discarded.\n    --- PASS: docker.lib-coreos-dockerd-compat/networks-reliably (151.22s)\n            cluster.go:125: #1 [internal] load build definition from Dockerfile\n            cluster.go:125: #1 transferring dockerfile: 108B done\n            cluster.go:125: #1 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #2 [internal] load .dockerignore\n            cluster.go:125: #2 transferring context: 2B done\n            cluster.go:125: #2 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #3 [internal] load build context\n            cluster.go:125: #3 transferring context: 4.16MB 0.0s done\n            cluster.go:125: #3 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #4 [1/1] COPY . /\n            cluster.go:125: #4 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #5 exporting to image\n            cluster.go:125: #5 exporting layers 0.1s done\n            cluster.go:125: #5 writing image sha256:b6f8de3b45d280804d056914d8df2e16ff6764a980065693c2db90917bacaee0 done\n            cluster.go:125: #5 naming to docker.io/library/ping 0.0s done\n            cluster.go:125: #5 DONE 0.1s\n    --- PASS: docker.lib-coreos-dockerd-compat/user-no-caps (4.49s)\n            cluster.go:125: #1 [internal] load build definition from Dockerfile\n            cluster.go:125: #1 transferring dockerfile: 108B done\n            cluster.go:125: #1 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #2 [internal] load .dockerignore\n            cluster.go:125: #2 transferring context: 2B done\n            cluster.go:125: #2 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #3 [internal] load build context\n            cluster.go:125: #3 transferring context: 5.22MB 0.0s done\n            cluster.go:125: #3 DONE 0.1s\n            cluster.go:125: \n            cluster.go:125: #4 [1/1] COPY . /\n            cluster.go:125: #4 DONE 0.0s\n            cluster.go:125: \n            cluster.go:125: #5 exporting to image\n            cluster.go:125: #5 exporting layers 0.0s done\n            cluster.go:125: #5 writing image sha256:3b124f9e98fcaa8099457def82db9b75da85524568ec4d7cb15548aeb4a0f78b done\n            cluster.go:125: #5 naming to docker.io/library/captest 0.0s done\n            cluster.go:125: #5 DONE 0.1s\n    --- PASS: docker.lib-coreos-dockerd-compat/ownership (8.85s)\n            cluster.go:125: Unable to find image 'ghcr.io/flatcar/nginx:latest' locally\n            cluster.go:125: latest: Pulling from flatcar/nginx\n            cluster.go:125: 492b5f090343: Pulling fs layer\n            cluster.go:125: 0fed669acb5d: Pulling fs layer\n            cluster.go:125: e262069eea4f: Pulling fs layer\n            cluster.go:125: f0e6b76bc26b: Pulling fs layer\n            cluster.go:125: b0231c9ece2d: Pulling fs layer\n            cluster.go:125: f4978e9dba23: Pulling fs layer\n            cluster.go:125: ced25bc5fda8: Pulling fs layer\n            cluster.go:125: f0e6b76bc26b: Waiting\n            cluster.go:125: b0231c9ece2d: Waiting\n            cluster.go:125: f4978e9dba23: Waiting\n            cluster.go:125: ced25bc5fda8: Waiting\n            cluster.go:125: e262069eea4f: Verifying Checksum\n            cluster.go:125: e262069eea4f: Download complete\n            cluster.go:125: 492b5f090343: Verifying Checksum\n            cluster.go:125: 492b5f090343: Download complete\n            cluster.go:125: 0fed669acb5d: Verifying Checksum\n            cluster.go:125: 0fed669acb5d: Download complete\n            cluster.go:125: f0e6b76bc26b: Verifying Checksum\n            cluster.go:125: f0e6b76bc26b: Download complete\n            cluster.go:125: b0231c9ece2d: Download complete\n            cluster.go:125: f4978e9dba23: Verifying Checksum\n            cluster.go:125: f4978e9dba23: Download complete\n            cluster.go:125: ced25bc5fda8: Verifying Checksum\n            cluster.go:125: ced25bc5fda8: Download complete\n            cluster.go:125: 492b5f090343: Pull complete\n            cluster.go:125: 0fed669acb5d: Pull complete\n            cluster.go:125: e262069eea4f: Pull complete\n            cluster.go:125: f0e6b76bc26b: Pull complete\n            cluster.go:125: b0231c9ece2d: Pull complete\n            cluster.go:125: f4978e9dba23: Pull complete\n            cluster.go:125: ced25bc5fda8: Pull complete\n            cluster.go:125: Digest: sha256:922a5603984560970f4e265613fdc25077f4826efbaf4a082670f2a86a3849f0\n            cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/nginx:latest\n"},{"name":"cl.network.wireguard","result":"PASS","duration":127043009179,"output":"        cluster.go:152: + ip --json address show kv0 | jq -r '.[] | .addr_info | .[] | select( .family == \"inet\") | .local'\n"},{"name":"cl.cloudinit.basic","result":"FAIL","duration":3596116517,"output":"        harness.go:651: Cluster failed starting machines: PUT https://management.azure.com/subscriptions/0e46bd28-a80f-4d3a-8200-d9eb8d80cb2e/resourceGroups/kola-cluster-image-e35ad0b0bf/providers/Microsoft.Compute/virtualMachines/ci-4081.3.10--e3f81010b5\n--------------------------------------------------------------------------------\nRESPONSE 409: 409 Conflict\nERROR CODE: OperationNotAllowed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"OperationNotAllowed\",\n    \"message\": \"Operation could not be completed as it results in exceeding approved standardDPLSv5Family Cores quota. Additional details - Deployment Model: Resource Manager, Location: westus2, Current Limit: 65, Current Usage: 64, Additional Required: 2, (Minimum) New Limit Required: 66. Setup Alerts when Quota reaches threshold. Learn more at https://aka.ms/quotamonitoringalerting . Submit a request for Quota increase at https://aka.ms/ProdportalCRP/#blade/Microsoft_Azure_Capacity/UsageAndQuota.ReactView/Parameters/%7B%22subscriptionId%22:%220e46bd28-a80f-4d3a-8200-d9eb8d80cb2e%22,%22command%22:%22openQuotaApprovalBlade%22,%22quotas%22:[%7B%22location%22:%22westus2%22,%22providerId%22:%22Microsoft.Compute%22,%22resourceName%22:%22standardDPLSv5Family%22,%22quotaRequest%22:%7B%22properties%22:%7B%22limit%22:66,%22unit%22:%22Count%22,%22name%22:%7B%22value%22:%22standardDPLSv5Family%22%7D%7D%7D%7D]%7D by specifying parameters listed in the ‘Details’ section for deployment to succeed. Please read more about quota limits at https://docs.microsoft.com/en-us/azure/azure-supportability/per-vm-quota-requests\"\n  }\n}\n--------------------------------------------------------------------------------\n"},{"name":"coreos.ignition.groups","result":"PASS","duration":131245105104,"output":""},{"name":"sysext.disable-docker","result":"PASS","duration":126570002541,"output":""},{"name":"kubeadm.v1.34.4.flannel.base/node_readiness","result":"PASS","duration":15020058125,"output":""},{"name":"kubeadm.v1.36.1.calico.base/node_readiness","result":"PASS","duration":21869102512,"output":""},{"name":"cl.ignition.v1.ext4root","result":"PASS","duration":99895229472,"output":""},{"name":"systemd.sysusers.gshadow","result":"PASS","duration":99782344415,"output":""},{"name":"cl.ignition.v2.users","result":"PASS","duration":134986832109,"output":""},{"name":"kubeadm.v1.34.4.flannel.base/nginx_deployment","result":"PASS","duration":10094092956,"output":""},{"name":"cl.ignition.v2.btrfsroot","result":"PASS","duration":78686781056,"output":""},{"name":"coreos.ignition.resource.local","result":"PASS","duration":230190027188,"output":""},{"name":"kubeadm.v1.36.1.calico.base/nginx_deployment","result":"PASS","duration":10089687550,"output":""},{"name":"coreos.auth.verify","result":"PASS","duration":125604080249,"output":""},{"name":"kubeadm.v1.35.1.flannel.base/node_readiness","result":"PASS","duration":8438152362,"output":""},{"name":"cl.verity/corruption","result":"PASS","duration":176700615743,"output":""},{"name":"cl.verity","result":"PASS","duration":375024672301,"output":"    --- PASS: cl.verity/verify (102.93s)\n            cluster.go:125: Success\n    --- PASS: cl.verity/corruption (176.70s)\n"},{"name":"kubeadm.v1.35.1.flannel.base/nginx_deployment","result":"PASS","duration":10052501723,"output":""},{"name":"kubeadm.v1.34.4.flannel.base/NFS_deployment","result":"PASS","duration":21034559839,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.flannel.base","result":"PASS","duration":382399647095,"output":"        cluster.go:125: I0904 02:20:59.929832    2339 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n        cluster.go:125: I0904 02:21:09.794049    2553 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [init] Using Kubernetes version: v1.34.11\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--2f2f87ab48\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--2f2f87ab48\": lookup ci-4081.3.10--2f2f87ab48 on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:21:10.031233    2553 checks.go:827] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--2f2f87ab48 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.25]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 1.002206382s\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.25:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.798030966s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.901825485s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.502128139s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--2f2f87ab48 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--2f2f87ab48 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: y76vvo.sgi8vg4p943ub625\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.25:6443 --token y76vvo.sgi8vg4p943ub625 \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:a39a6e319db77900f52a4b795de482a41878b5cc12421b949963426714f7b2df \n        cluster.go:125: namespace/kube-flannel created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n        cluster.go:125: serviceaccount/flannel created\n        cluster.go:125: configmap/kube-flannel-cfg created\n        cluster.go:125: daemonset.apps/kube-flannel-ds created\n        cluster.go:125: W0904 02:23:25.009727    2219 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.34.4.flannel.base/node_readiness (15.02s)\n    --- PASS: kubeadm.v1.34.4.flannel.base/nginx_deployment (10.09s)\n    --- PASS: kubeadm.v1.34.4.flannel.base/NFS_deployment (21.03s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.36.1.cilium.base","result":"FAIL","duration":285589994863,"output":"        cluster.go:125: I0904 02:23:45.032386    2386 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.36\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.2\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.8-0\n        cluster.go:125: I0904 02:23:55.267850    2711 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.36\n        cluster.go:125: [init] Using Kubernetes version: v1.36.4\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: E0904 02:23:55.313114    2711 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--a6779faad6\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--a6779faad6\": lookup ci-4081.3.10--a6779faad6 on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:23:55.987448    2711 checks.go:907] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--a6779faad6 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.5]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 584.962µs\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.5:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 12.145403ms\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 17.380622ms\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 1.501191734s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--a6779faad6 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--a6779faad6 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: 5tcsyl.bu0tzyryw9wvnbm0\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the API server kubelet client certificate to access the kubelet API\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.5:6443 --token 5tcsyl.bu0tzyryw9wvnbm0 \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:b340a161c576d9f7c9221155515b68a98ac97cd96aae619760775fa86b144e0f \n        cluster.go:125: i  Using Cilium version 1.12.5\n        cluster.go:125: ? Auto-detected cluster name: kubernetes\n        cluster.go:125: ? Auto-detected datapath mode: tunnel\n        cluster.go:125: ? Auto-detected kube-proxy has been installed\n        cluster.go:125: i  helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n        cluster.go:125: i  Storing helm values file in kube-system/cilium-cli-helm-values Secret\n        cluster.go:125: ? Created CA in secret cilium-ca\n        cluster.go:125: ? Generating certificates for Hubble...\n        cluster.go:125: ? Creating Service accounts...\n        cluster.go:125: ? Creating Cluster roles...\n        cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n        cluster.go:125: i  Manual overwrite in ConfigMap: enable-endpoint-routes=true\n        cluster.go:125: i  Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n        cluster.go:125: ? Creating Agent DaemonSet...\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: ? Creating Operator Deployment...\n        cluster.go:125: ? Waiting for Cilium to be installed and ready...\n        cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n        cluster.go:125: \u001b[33m    /??\\\n        cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m    Cilium:         \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m    Operator:       \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m    Hubble:         \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m    ClusterMesh:    \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[34m    \\__/\n        cluster.go:125: \u001b[0m\n        cluster.go:125: DaemonSet        cilium             \n        cluster.go:125: Deployment       cilium-operator    \n        cluster.go:125: Containers:      cilium             \n        cluster.go:125:                  cilium-operator    \n        cluster.go:125: Cluster Pods:    0/0 managed by Cilium\n        kubeadm.go:197: unable to setup cluster: unable to create worker node: PUT https://management.azure.com/subscriptions/0e46bd28-a80f-4d3a-8200-d9eb8d80cb2e/resourceGroups/kola-cluster-image-e35ad0b0bf/providers/Microsoft.Compute/virtualMachines/ci-4081.3.10--f4a2206839\n--------------------------------------------------------------------------------\nRESPONSE 409: 409 Conflict\nERROR CODE: OperationNotAllowed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"OperationNotAllowed\",\n    \"message\": \"Operation could not be completed as it results in exceeding approved standardDPLSv5Family Cores quota. Additional details - Deployment Model: Resource Manager, Location: westus2, Current Limit: 65, Current Usage: 64, Additional Required: 2, (Minimum) New Limit Required: 66. Setup Alerts when Quota reaches threshold. Learn more at https://aka.ms/quotamonitoringalerting . Submit a request for Quota increase at https://aka.ms/ProdportalCRP/#blade/Microsoft_Azure_Capacity/UsageAndQuota.ReactView/Parameters/%7B%22subscriptionId%22:%220e46bd28-a80f-4d3a-8200-d9eb8d80cb2e%22,%22command%22:%22openQuotaApprovalBlade%22,%22quotas%22:[%7B%22location%22:%22westus2%22,%22providerId%22:%22Microsoft.Compute%22,%22resourceName%22:%22standardDPLSv5Family%22,%22quotaRequest%22:%7B%22properties%22:%7B%22limit%22:66,%22unit%22:%22Count%22,%22name%22:%7B%22value%22:%22standardDPLSv5Family%22%7D%7D%7D%7D]%7D by specifying parameters listed in the ‘Details’ section for deployment to succeed. Please read more about quota limits at https://docs.microsoft.com/en-us/azure/azure-supportability/per-vm-quota-requests\"\n  }\n}\n--------------------------------------------------------------------------------\n"},{"name":"coreos.ignition.security.tls","result":"FAIL","duration":114221213005,"output":"        security.go:132: starting client: PUT https://management.azure.com/subscriptions/0e46bd28-a80f-4d3a-8200-d9eb8d80cb2e/resourceGroups/kola-cluster-image-e35ad0b0bf/providers/Microsoft.Compute/virtualMachines/ci-4081.3.10--06b5953740\n--------------------------------------------------------------------------------\nRESPONSE 409: 409 Conflict\nERROR CODE: OperationNotAllowed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"OperationNotAllowed\",\n    \"message\": \"Operation could not be completed as it results in exceeding approved standardDPLSv5Family Cores quota. Additional details - Deployment Model: Resource Manager, Location: westus2, Current Limit: 65, Current Usage: 64, Additional Required: 2, (Minimum) New Limit Required: 66. Setup Alerts when Quota reaches threshold. Learn more at https://aka.ms/quotamonitoringalerting . Submit a request for Quota increase at https://aka.ms/ProdportalCRP/#blade/Microsoft_Azure_Capacity/UsageAndQuota.ReactView/Parameters/%7B%22subscriptionId%22:%220e46bd28-a80f-4d3a-8200-d9eb8d80cb2e%22,%22command%22:%22openQuotaApprovalBlade%22,%22quotas%22:[%7B%22location%22:%22westus2%22,%22providerId%22:%22Microsoft.Compute%22,%22resourceName%22:%22standardDPLSv5Family%22,%22quotaRequest%22:%7B%22properties%22:%7B%22limit%22:66,%22unit%22:%22Count%22,%22name%22:%7B%22value%22:%22standardDPLSv5Family%22%7D%7D%7D%7D]%7D by specifying parameters listed in the ‘Details’ section for deployment to succeed. Please read more about quota limits at https://docs.microsoft.com/en-us/azure/azure-supportability/per-vm-quota-requests\"\n  }\n}\n--------------------------------------------------------------------------------\n"},{"name":"cl.ignition.v1.xfsroot","result":"PASS","duration":190571509207,"output":""},{"name":"kubeadm.v1.34.4.cilium.base","result":"FAIL","duration":287318827656,"output":"        cluster.go:125: I0904 02:23:45.354854    2407 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n        cluster.go:125: I0904 02:23:55.051481    2660 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [init] Using Kubernetes version: v1.34.11\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--f62896986d\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--f62896986d\": lookup ci-4081.3.10--f62896986d on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:23:55.260529    2660 checks.go:827] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--f62896986d kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.34]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 1.002073952s\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.34:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.799285061s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.637244418s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.501736699s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--f62896986d as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--f62896986d as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: 3n2k53.3ficn3w4idweme8v\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.34:6443 --token 3n2k53.3ficn3w4idweme8v \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:36a601cfd9de909e07f30ff0820a4bcbd7615c39ba661f671da91ee2a5d56e40 \n        cluster.go:125: i  Using Cilium version 1.12.5\n        cluster.go:125: ? Auto-detected cluster name: kubernetes\n        cluster.go:125: ? Auto-detected datapath mode: tunnel\n        cluster.go:125: ? Auto-detected kube-proxy has been installed\n        cluster.go:125: i  helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n        cluster.go:125: i  Storing helm values file in kube-system/cilium-cli-helm-values Secret\n        cluster.go:125: ? Created CA in secret cilium-ca\n        cluster.go:125: ? Generating certificates for Hubble...\n        cluster.go:125: ? Creating Service accounts...\n        cluster.go:125: ? Creating Cluster roles...\n        cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n        cluster.go:125: i  Manual overwrite in ConfigMap: enable-endpoint-routes=true\n        cluster.go:125: i  Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n        cluster.go:125: ? Creating Agent DaemonSet...\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: ? Creating Operator Deployment...\n        cluster.go:125: ? Waiting for Cilium to be installed and ready...\n        cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n        cluster.go:125: \u001b[33m    /??\\\n        cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m    Cilium:         \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m    Operator:       \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m    Hubble:         \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m    ClusterMesh:    \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[34m    \\__/\n        cluster.go:125: \u001b[0m\n        cluster.go:125: DaemonSet        cilium             \n        cluster.go:125: Deployment       cilium-operator    \n        cluster.go:125: Containers:      cilium             \n        cluster.go:125:                  cilium-operator    \n        cluster.go:125: Cluster Pods:    0/0 managed by Cilium\n        kubeadm.go:197: unable to setup cluster: unable to create worker node: PUT https://management.azure.com/subscriptions/0e46bd28-a80f-4d3a-8200-d9eb8d80cb2e/resourceGroups/kola-cluster-image-e35ad0b0bf/providers/Microsoft.Compute/virtualMachines/ci-4081.3.10--2c546b2dc4\n--------------------------------------------------------------------------------\nRESPONSE 409: 409 Conflict\nERROR CODE: OperationNotAllowed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"OperationNotAllowed\",\n    \"message\": \"Operation could not be completed as it results in exceeding approved standardDPLSv5Family Cores quota. Additional details - Deployment Model: Resource Manager, Location: westus2, Current Limit: 65, Current Usage: 64, Additional Required: 2, (Minimum) New Limit Required: 66. Setup Alerts when Quota reaches threshold. Learn more at https://aka.ms/quotamonitoringalerting . Submit a request for Quota increase at https://aka.ms/ProdportalCRP/#blade/Microsoft_Azure_Capacity/UsageAndQuota.ReactView/Parameters/%7B%22subscriptionId%22:%220e46bd28-a80f-4d3a-8200-d9eb8d80cb2e%22,%22command%22:%22openQuotaApprovalBlade%22,%22quotas%22:[%7B%22location%22:%22westus2%22,%22providerId%22:%22Microsoft.Compute%22,%22resourceName%22:%22standardDPLSv5Family%22,%22quotaRequest%22:%7B%22properties%22:%7B%22limit%22:66,%22unit%22:%22Count%22,%22name%22:%7B%22value%22:%22standardDPLSv5Family%22%7D%7D%7D%7D]%7D by specifying parameters listed in the ‘Details’ section for deployment to succeed. Please read more about quota limits at https://docs.microsoft.com/en-us/azure/azure-supportability/per-vm-quota-requests\"\n  }\n}\n--------------------------------------------------------------------------------\n"},{"name":"kubeadm.v1.36.1.calico.base/NFS_deployment","result":"PASS","duration":34443334604,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.flannel.base/NFS_deployment","result":"PASS","duration":20740583338,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.36.1.calico.base","result":"PASS","duration":400751921905,"output":"        cluster.go:125: I0904 02:21:38.145253    2391 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.36\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.2\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.8-0\n        cluster.go:125: I0904 02:21:48.070499    2658 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.36\n        cluster.go:125: [init] Using Kubernetes version: v1.36.4\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: E0904 02:21:48.197177    2658 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--12f603d7bd\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--12f603d7bd\": lookup ci-4081.3.10--12f603d7bd on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:21:48.351553    2658 checks.go:907] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--12f603d7bd kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.9]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 1.552ms\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.9:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 17.415762ms\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 21.543442ms\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 1.500873312s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--12f603d7bd as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--12f603d7bd as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: hh10i9.flo6i2qyo1jd2z4m\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the API server kubelet client certificate to access the kubelet API\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.9:6443 --token hh10i9.flo6i2qyo1jd2z4m \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:0299909b447192df0d769586c554cef0875e4aec6aa1a700320e503bb90b3360 \n        cluster.go:125: namespace/tigera-operator created\n        cluster.go:125: serviceaccount/tigera-operator created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: deployment.apps/tigera-operator created\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n        cluster.go:125: installation.operator.tigera.io/default created\n        cluster.go:125: apiserver.operator.tigera.io/default created\n        cluster.go:125: goldmane.operator.tigera.io/default created\n        cluster.go:125: whisker.operator.tigera.io/default created\n        cluster.go:125: W0904 02:23:23.127310    2215 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: E0904 02:23:23.135463    2215 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: W0904 02:23:23.321547    2215 utils.go:69] The recommended value for \"bindAddress\" in \"KubeProxyConfiguration\" is: ::; the provided value is: 0.0.0.0\n    --- PASS: kubeadm.v1.36.1.calico.base/node_readiness (21.87s)\n    --- PASS: kubeadm.v1.36.1.calico.base/nginx_deployment (10.09s)\n    --- PASS: kubeadm.v1.36.1.calico.base/NFS_deployment (34.44s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.toolbox.dnf-install","result":"PASS","duration":115356563187,"output":""},{"name":"kubeadm.v1.35.1.flannel.base","result":"PASS","duration":403069357308,"output":"        cluster.go:125: I0904 02:22:01.389360    2321 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.35\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n        cluster.go:125: I0904 02:22:11.437207    2596 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.35\n        cluster.go:125: [init] Using Kubernetes version: v1.35.8\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--e3a6fa43a2\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--e3a6fa43a2\": lookup ci-4081.3.10--e3a6fa43a2 on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:22:11.667801    2596 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--e3a6fa43a2 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.21]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 514.218481ms\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.21:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 3.007799497s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.513590054s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.501703017s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--e3a6fa43a2 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--e3a6fa43a2 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: k8tipt.lkepxucw5o54zhpb\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.21:6443 --token k8tipt.lkepxucw5o54zhpb \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:cf86b1cc3f06e3bd65f26f490752f7588a6377baada8f54558644b355d06e1fb \n        cluster.go:125: namespace/kube-flannel created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n        cluster.go:125: serviceaccount/flannel created\n        cluster.go:125: configmap/kube-flannel-cfg created\n        cluster.go:125: daemonset.apps/kube-flannel-ds created\n        cluster.go:125: W0904 02:23:52.410462    2207 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.35.1.flannel.base/node_readiness (8.44s)\n    --- PASS: kubeadm.v1.35.1.flannel.base/nginx_deployment (10.05s)\n    --- PASS: kubeadm.v1.35.1.flannel.base/NFS_deployment (20.74s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"coreos.selinux.boolean","result":"PASS","duration":125728305972,"output":""},{"name":"coreos.selinux.enforce","result":"PASS","duration":132155611733,"output":""},{"name":"cl.basic/MachineID","result":"PASS","duration":1629624106,"output":""},{"name":"cl.basic/Microcode","result":"PASS","duration":1644704219,"output":""},{"name":"cl.basic/CloudConfig","result":"PASS","duration":2128206050,"output":""},{"name":"cl.basic/Script","result":"PASS","duration":1742220548,"output":""},{"name":"cl.basic/DbusPerms","result":"PASS","duration":1685499473,"output":""},{"name":"coreos.locksmith.tls","result":"PASS","duration":115217414288,"output":""},{"name":"cl.basic/SymlinkFlatcar","result":"PASS","duration":1626054196,"output":""},{"name":"cl.basic/UpdateEngineKeys","result":"PASS","duration":1624513683,"output":""},{"name":"cl.basic/ServicesActive","result":"PASS","duration":1659199693,"output":""},{"name":"cl.basic/ReadOnly","result":"PASS","duration":1629781186,"output":""},{"name":"cl.basic/Useradd","result":"PASS","duration":2111081952,"output":""},{"name":"cl.basic/PortSSH","result":"PASS","duration":1623374065,"output":""},{"name":"cl.basic/Symlink","result":"PASS","duration":1625881372,"output":""},{"name":"cl.basic/RandomUUID","result":"PASS","duration":1672273312,"output":""},{"name":"cl.ignition.v1.btrfsroot","result":"PASS","duration":99121826808,"output":""},{"name":"cl.basic","result":"PASS","duration":124613886021,"output":"    --- PASS: cl.basic/MachineID (1.63s)\n    --- PASS: cl.basic/Microcode (1.64s)\n    --- PASS: cl.basic/CloudConfig (2.13s)\n    --- PASS: cl.basic/Script (1.74s)\n    --- PASS: cl.basic/DbusPerms (1.69s)\n    --- PASS: cl.basic/SymlinkFlatcar (1.63s)\n    --- PASS: cl.basic/UpdateEngineKeys (1.62s)\n    --- PASS: cl.basic/ServicesActive (1.66s)\n    --- PASS: cl.basic/ReadOnly (1.63s)\n    --- PASS: cl.basic/Useradd (2.11s)\n    --- PASS: cl.basic/PortSSH (1.62s)\n    --- PASS: cl.basic/Symlink (1.63s)\n    --- PASS: cl.basic/RandomUUID (1.67s)\n"},{"name":"cl.etcd-member.etcdctlv3","result":"PASS","duration":96905372329,"output":"        cluster.go:125: {\"level\":\"info\",\"ts\":1788488769.5401285,\"caller\":\"snapshot/v3_snapshot.go:68\",\"msg\":\"created temporary db file\",\"path\":\"/tmp/tmp.lJPOLBCKKO/snapshot.db.part\"}\n        cluster.go:125: {\"level\":\"info\",\"ts\":1788488769.5409367,\"logger\":\"client\",\"caller\":\"v3/maintenance.go:211\",\"msg\":\"opened snapshot stream; downloading\"}\n        cluster.go:125: {\"level\":\"info\",\"ts\":1788488769.5409603,\"caller\":\"snapshot/v3_snapshot.go:76\",\"msg\":\"fetching snapshot\",\"endpoint\":\"127.0.0.1:2379\"}\n        cluster.go:125: {\"level\":\"info\",\"ts\":1788488769.5460422,\"logger\":\"client\",\"caller\":\"v3/maintenance.go:219\",\"msg\":\"completed snapshot read; closing\"}\n        cluster.go:125: {\"level\":\"info\",\"ts\":1788488769.546087,\"caller\":\"snapshot/v3_snapshot.go:91\",\"msg\":\"fetched snapshot\",\"endpoint\":\"127.0.0.1:2379\",\"size\":\"20 kB\",\"took\":\"now\"}\n        cluster.go:125: {\"level\":\"info\",\"ts\":1788488769.546115,\"caller\":\"snapshot/v3_snapshot.go:100\",\"msg\":\"saved\",\"path\":\"/tmp/tmp.lJPOLBCKKO/snapshot.db\"}\n        cluster.go:125: Deprecated: Use `etcdutl snapshot status` instead.\n"},{"name":"cl.cloudinit.multipart-mime","result":"PASS","duration":103457332296,"output":""},{"name":"docker.selinux","result":"PASS","duration":142408824984,"output":"        cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n        cluster.go:125: latest: Pulling from flatcar/busybox\n        cluster.go:125: dbc3eadfebd7: Pulling fs layer\n        cluster.go:125: dbc3eadfebd7: Verifying Checksum\n        cluster.go:125: dbc3eadfebd7: Download complete\n        cluster.go:125: dbc3eadfebd7: Pull complete\n        cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n        cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n        cluster.go:125: sh: can't create /opt/hello: Permission denied\n"},{"name":"kubeadm.v1.34.4.calico.base/node_readiness","result":"PASS","duration":28449067868,"output":""},{"name":"sysext.simple","result":"PASS","duration":133275186777,"output":""},{"name":"cl.overlay.cleanup","result":"PASS","duration":159704164973,"output":""},{"name":"kubeadm.v1.34.4.calico.base/nginx_deployment","result":"PASS","duration":10089591926,"output":""},{"name":"cl.cloudinit.script","result":"PASS","duration":126279606971,"output":""},{"name":"cl.ignition.v1.users","result":"PASS","duration":134451746707,"output":""},{"name":"kubeadm.v1.34.4.calico.base/NFS_deployment","result":"PASS","duration":34270504592,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.calico.base","result":"PASS","duration":465852798934,"output":"        cluster.go:125: I0904 02:23:44.153164    2375 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n        cluster.go:125: I0904 02:23:54.204315    2590 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [init] Using Kubernetes version: v1.34.11\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--aedf35ac05\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--aedf35ac05\": lookup ci-4081.3.10--aedf35ac05 on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:23:54.397523    2590 checks.go:827] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--aedf35ac05 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.31]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 2.501231185s\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.31:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.809831534s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.193382986s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 6.002819908s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--aedf35ac05 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--aedf35ac05 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: 4iiwfu.hh0mqwa1tnz21lr9\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.31:6443 --token 4iiwfu.hh0mqwa1tnz21lr9 \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:e1652f4ea4128d43c960835e93648c80e13c1fd4a7152668f6bcd03790313459 \n        cluster.go:125: namespace/tigera-operator created\n        cluster.go:125: serviceaccount/tigera-operator created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: deployment.apps/tigera-operator created\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n        cluster.go:125: installation.operator.tigera.io/default created\n        cluster.go:125: apiserver.operator.tigera.io/default created\n        cluster.go:125: goldmane.operator.tigera.io/default created\n        cluster.go:125: whisker.operator.tigera.io/default created\n        cluster.go:125: W0904 02:25:58.030857    2257 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.34.4.calico.base/node_readiness (28.45s)\n    --- PASS: kubeadm.v1.34.4.calico.base/nginx_deployment (10.09s)\n    --- PASS: kubeadm.v1.34.4.calico.base/NFS_deployment (34.27s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.locksmith.cluster","result":"PASS","duration":481376634511,"output":""},{"name":"docker.containerd-restart","result":"PASS","duration":199290635218,"output":"        cluster.go:125: Unable to find image 'ghcr.io/flatcar/busybox:latest' locally\n        cluster.go:125: latest: Pulling from flatcar/busybox\n        cluster.go:125: dbc3eadfebd7: Pulling fs layer\n        cluster.go:125: dbc3eadfebd7: Verifying Checksum\n        cluster.go:125: dbc3eadfebd7: Download complete\n        cluster.go:125: dbc3eadfebd7: Pull complete\n        cluster.go:125: Digest: sha256:93e8234eb9ca92b9aae20fd73d6c9447ac3d1cc741c6e80c737f821dca582a0e\n        cluster.go:125: Status: Downloaded newer image for ghcr.io/flatcar/busybox:latest\n"},{"name":"kubeadm.v1.34.4.calico.cgroupv1.base/node_readiness","result":"PASS","duration":21758937004,"output":""},{"name":"kubeadm.v1.34.4.calico.cgroupv1.base/nginx_deployment","result":"PASS","duration":10155489071,"output":""},{"name":"kubeadm.v1.34.4.calico.cgroupv1.base/NFS_deployment","result":"PASS","duration":34250290642,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.calico.cgroupv1.base","result":"PASS","duration":394683472933,"output":"        cluster.go:125: I0904 02:25:33.508127    2527 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n        cluster.go:125: I0904 02:25:42.767594    2748 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [init] Using Kubernetes version: v1.34.11\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--638acf9cdf\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--638acf9cdf\": lookup ci-4081.3.10--638acf9cdf on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:25:42.961287    2748 checks.go:827] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--638acf9cdf kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.13]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 501.591246ms\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.13:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.734012594s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.349144142s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.002008078s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--638acf9cdf as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--638acf9cdf as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: za1y3f.i46gqxa0kf5df2v1\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.13:6443 --token za1y3f.i46gqxa0kf5df2v1 \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:7daad12d12eb89e14438d21ca1fd3cb96374f604a2ba55f656235ef9a3c9c473 \n        cluster.go:125: namespace/tigera-operator created\n        cluster.go:125: serviceaccount/tigera-operator created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: deployment.apps/tigera-operator created\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n        cluster.go:125: installation.operator.tigera.io/default created\n        cluster.go:125: apiserver.operator.tigera.io/default created\n        cluster.go:125: goldmane.operator.tigera.io/default created\n        cluster.go:125: whisker.operator.tigera.io/default created\n        cluster.go:125: W0904 02:27:42.905717    2386 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.34.4.calico.cgroupv1.base/node_readiness (21.76s)\n    --- PASS: kubeadm.v1.34.4.calico.cgroupv1.base/nginx_deployment (10.16s)\n    --- PASS: kubeadm.v1.34.4.calico.cgroupv1.base/NFS_deployment (34.25s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"cl.etcd-member.discovery","result":"PASS","duration":190122341656,"output":""},{"name":"kubeadm.v1.36.1.flannel.base/node_readiness","result":"PASS","duration":15023873017,"output":""},{"name":"kubeadm.v1.36.1.flannel.base/nginx_deployment","result":"PASS","duration":10043698835,"output":""},{"name":"kubeadm.v1.35.1.calico.base/node_readiness","result":"PASS","duration":21762595588,"output":""},{"name":"kubeadm.v1.36.1.flannel.base/NFS_deployment","result":"PASS","duration":27409092862,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.36.1.flannel.base","result":"PASS","duration":354276516883,"output":"        cluster.go:125: I0904 02:27:24.291446    2334 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.36\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.36.4\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.14.2\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.2\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.8-0\n        cluster.go:125: I0904 02:27:33.768477    2564 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.36\n        cluster.go:125: [init] Using Kubernetes version: v1.36.4\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: E0904 02:27:33.819929    2564 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--6a22b2bd94\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--6a22b2bd94\": lookup ci-4081.3.10--6a22b2bd94 on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:27:34.056818    2564 checks.go:907] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.2\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--6a22b2bd94 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.32]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 935.043µs\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.32:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 27.220705ms\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 58.107219ms\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 2.002653725s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--6a22b2bd94 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--6a22b2bd94 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: e3ehj6.jmyi7wrt4w9z7lb2\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the API server kubelet client certificate to access the kubelet API\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.32:6443 --token e3ehj6.jmyi7wrt4w9z7lb2 \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:c48bc13b50f8b25975d12b0b5ab435199b66751c3c95dc3cc121016b0a9eccd0 \n        cluster.go:125: namespace/kube-flannel created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n        cluster.go:125: serviceaccount/flannel created\n        cluster.go:125: configmap/kube-flannel-cfg created\n        cluster.go:125: daemonset.apps/kube-flannel-ds created\n        cluster.go:125: W0904 02:29:16.504584    2194 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: E0904 02:29:16.513946    2194 remote_runtime.go:1177] \"RuntimeConfig from runtime service failed\" err=\"rpc error: code = Unimplemented desc = unknown method RuntimeConfig for service runtime.v1.RuntimeService\"\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.37. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: W0904 02:29:16.686695    2194 utils.go:69] The recommended value for \"bindAddress\" in \"KubeProxyConfiguration\" is: ::; the provided value is: 0.0.0.0\n    --- PASS: kubeadm.v1.36.1.flannel.base/node_readiness (15.02s)\n    --- PASS: kubeadm.v1.36.1.flannel.base/nginx_deployment (10.04s)\n    --- PASS: kubeadm.v1.36.1.flannel.base/NFS_deployment (27.41s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.35.1.calico.base/nginx_deployment","result":"PASS","duration":10136711616,"output":""},{"name":"coreos.locksmith.reboot","result":"FAIL","duration":387214500779,"output":"        locksmith.go:141: failed to check rebooted machine: some systemd units failed:\n● ldconfig.service loaded failed failed Rebuild Dynamic Linker Cache\nstatus: \njournal:-- No entries --\n"},{"name":"kubeadm.v1.35.1.calico.base/NFS_deployment","result":"PASS","duration":34273802393,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"coreos.update.badusr","result":"PASS","duration":431055014011,"output":""},{"name":"kubeadm.v1.35.1.calico.base","result":"PASS","duration":423760885193,"output":"        cluster.go:125: I0904 02:27:07.519751    2398 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.35\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n        cluster.go:125: I0904 02:27:16.993202    2702 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.35\n        cluster.go:125: [init] Using Kubernetes version: v1.35.8\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--9e7d1e7945\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--9e7d1e7945\": lookup ci-4081.3.10--9e7d1e7945 on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:27:17.266687    2702 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--9e7d1e7945 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.24]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 501.615708ms\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.24:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 3.010254093s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.320352402s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.501416728s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--9e7d1e7945 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--9e7d1e7945 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: 64tymt.b1p7yyh8glqy1zxf\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.24:6443 --token 64tymt.b1p7yyh8glqy1zxf \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:fc9d0e871637514951020a93bad709df202a5bae76e5744bf358abb9a1c7071f \n        cluster.go:125: namespace/tigera-operator created\n        cluster.go:125: serviceaccount/tigera-operator created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/tigera-operator created\n        cluster.go:125: rolebinding.rbac.authorization.k8s.io/tigera-operator-secrets created\n        cluster.go:125: deployment.apps/tigera-operator created\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/installations.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n        cluster.go:125: customresourcedefinition.apiextensions.k8s.io/apiservers.operator.tigera.io condition met\n        cluster.go:125: installation.operator.tigera.io/default created\n        cluster.go:125: apiserver.operator.tigera.io/default created\n        cluster.go:125: goldmane.operator.tigera.io/default created\n        cluster.go:125: whisker.operator.tigera.io/default created\n        cluster.go:125: W0904 02:29:46.916581    2241 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.35.1.calico.base/node_readiness (21.76s)\n    --- PASS: kubeadm.v1.35.1.calico.base/nginx_deployment (10.14s)\n    --- PASS: kubeadm.v1.35.1.calico.base/NFS_deployment (34.27s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.flannel.cgroupv1.base/node_readiness","result":"PASS","duration":15048689367,"output":""},{"name":"kubeadm.v1.34.4.flannel.cgroupv1.base/nginx_deployment","result":"PASS","duration":10064476187,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/node_readiness","result":"PASS","duration":21697274337,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/nginx_deployment","result":"PASS","duration":10072749279,"output":""},{"name":"kubeadm.v1.34.4.flannel.cgroupv1.base/NFS_deployment","result":"PASS","duration":20629197228,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.flannel.cgroupv1.base","result":"PASS","duration":412186913120,"output":"        cluster.go:125: I0904 02:28:51.508126    2478 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n        cluster.go:125: I0904 02:29:01.101131    2695 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [init] Using Kubernetes version: v1.34.11\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--30ff388247\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--30ff388247\": lookup ci-4081.3.10--30ff388247 on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:29:01.388000    2695 checks.go:827] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--30ff388247 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.11]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 511.552006ms\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.11:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.586947132s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.416350709s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.502173677s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--30ff388247 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--30ff388247 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: 96yv0f.ehiyq167xf5rx1ec\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.11:6443 --token 96yv0f.ehiyq167xf5rx1ec \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:0fee77a0f6e48b34f181e0f5d5e3dd18de995e99ce512a5d6a6327ac1a89f63d \n        cluster.go:125: namespace/kube-flannel created\n        cluster.go:125: clusterrole.rbac.authorization.k8s.io/flannel created\n        cluster.go:125: clusterrolebinding.rbac.authorization.k8s.io/flannel created\n        cluster.go:125: serviceaccount/flannel created\n        cluster.go:125: configmap/kube-flannel-cfg created\n        cluster.go:125: daemonset.apps/kube-flannel-ds created\n        cluster.go:125: W0904 02:30:45.104823    2346 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.34.4.flannel.cgroupv1.base/node_readiness (15.05s)\n    --- PASS: kubeadm.v1.34.4.flannel.cgroupv1.base/nginx_deployment (10.06s)\n    --- PASS: kubeadm.v1.34.4.flannel.cgroupv1.base/NFS_deployment (20.63s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.cilium.cgroupv1.base/node_readiness","result":"PASS","duration":21683408327,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/NFS_deployment","result":"PASS","duration":20719550465,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.cilium.cgroupv1.base/nginx_deployment","result":"PASS","duration":10032549844,"output":""},{"name":"kubeadm.v1.35.1.cilium.base/IPSec_encryption","result":"PASS","duration":22378944698,"output":"        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.35.1.cilium.base","result":"PASS","duration":389600074792,"output":"        cluster.go:125: I0904 02:28:53.580435    2398 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.35\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.35.8\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.13.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.6-0\n        cluster.go:125: I0904 02:29:05.202482    2647 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.35\n        cluster.go:125: [init] Using Kubernetes version: v1.35.8\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--e9caa11bea\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--e9caa11bea\": lookup ci-4081.3.10--e9caa11bea on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:29:05.423004    2647 checks.go:906] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--e9caa11bea kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.17]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 1.00076559s\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.17:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 2.511199971s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 3.069543792s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 5.001912495s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--e9caa11bea as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--e9caa11bea as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: ojassx.6x6ktkobsamnl9bn\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.17:6443 --token ojassx.6x6ktkobsamnl9bn \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:0fe813d78afe9b429a8b36e4166d64940b56fdf6a2f10b5a3890219dd1945c7f \n        cluster.go:125: i  Using Cilium version 1.12.5\n        cluster.go:125: ? Auto-detected cluster name: kubernetes\n        cluster.go:125: ? Auto-detected datapath mode: tunnel\n        cluster.go:125: ? Auto-detected kube-proxy has been installed\n        cluster.go:125: i  helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n        cluster.go:125: i  Storing helm values file in kube-system/cilium-cli-helm-values Secret\n        cluster.go:125: ? Created CA in secret cilium-ca\n        cluster.go:125: ? Generating certificates for Hubble...\n        cluster.go:125: ? Creating Service accounts...\n        cluster.go:125: ? Creating Cluster roles...\n        cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n        cluster.go:125: i  Manual overwrite in ConfigMap: enable-endpoint-routes=true\n        cluster.go:125: i  Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n        cluster.go:125: ? Creating Agent DaemonSet...\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: ? Creating Operator Deployment...\n        cluster.go:125: ? Waiting for Cilium to be installed and ready...\n        cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n        cluster.go:125: \u001b[33m    /??\\\n        cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m    Cilium:         \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m    Operator:       \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m    Hubble:         \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m    ClusterMesh:    \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[34m    \\__/\n        cluster.go:125: \u001b[0m\n        cluster.go:125: DaemonSet        cilium             \n        cluster.go:125: Deployment       cilium-operator    \n        cluster.go:125: Containers:      cilium             \n        cluster.go:125:                  cilium-operator    \n        cluster.go:125: Cluster Pods:    0/0 managed by Cilium\n        cluster.go:125: W0904 02:30:51.986934    2247 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING ContainerRuntimeVersion]: You must update your container runtime to a version that supports the CRI method RuntimeConfig. Falling back to using cgroupDriver from kubelet config will be removed in 1.36. For more information, see https://git.k8s.io/enhancements/keps/sig-node/4033-group-driver-detection-over-cri\n        cluster.go:125: \t[WARNING Service-kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.35.1.cilium.base/node_readiness (21.70s)\n    --- PASS: kubeadm.v1.35.1.cilium.base/nginx_deployment (10.07s)\n    --- PASS: kubeadm.v1.35.1.cilium.base/NFS_deployment (20.72s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n    --- PASS: kubeadm.v1.35.1.cilium.base/IPSec_encryption (22.38s)\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.34.4.cilium.cgroupv1.base/NFS_deployment","result":"PASS","duration":20659349453,"output":"        cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n"},{"name":"kubeadm.v1.34.4.cilium.cgroupv1.base/IPSec_encryption","result":"PASS","duration":22197248306,"output":"        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"kubeadm.v1.34.4.cilium.cgroupv1.base","result":"PASS","duration":390578033291,"output":"        cluster.go:125: I0904 02:29:54.330153    2536 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-apiserver:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-controller-manager:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-scheduler:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/kube-proxy:v1.34.11\n        cluster.go:125: [config/images] Pulled registry.k8s.io/coredns/coredns:v1.12.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/pause:3.10.1\n        cluster.go:125: [config/images] Pulled registry.k8s.io/etcd:3.6.5-0\n        cluster.go:125: I0904 02:30:03.317429    2737 version.go:260] remote version is much newer: v1.37.0; falling back to: stable-1.34\n        cluster.go:125: [init] Using Kubernetes version: v1.34.11\n        cluster.go:125: [preflight] Running pre-flight checks\n        cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--4513e0e041\" could not be reached\n        cluster.go:125: \t[WARNING Hostname]: hostname \"ci-4081.3.10--4513e0e041\": lookup ci-4081.3.10--4513e0e041 on 168.63.129.16:53: no such host\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n        cluster.go:125: [preflight] Pulling images required for setting up a Kubernetes cluster\n        cluster.go:125: [preflight] This might take a minute or two, depending on the speed of your internet connection\n        cluster.go:125: [preflight] You can also perform this action beforehand using 'kubeadm config images pull'\n        cluster.go:125: W0904 02:30:03.845981    2737 checks.go:827] detected that the sandbox image \"registry.k8s.io/pause:3.8\" of the container runtime is inconsistent with that used by kubeadm. It is recommended to use \"registry.k8s.io/pause:3.10.1\" as the CRI sandbox image.\n        cluster.go:125: [certs] Using certificateDir folder \"/etc/kubernetes/pki\"\n        cluster.go:125: [certs] Generating \"ca\" certificate and key\n        cluster.go:125: [certs] Generating \"apiserver\" certificate and key\n        cluster.go:125: [certs] apiserver serving cert is signed for DNS names [ci-4081.3.10--4513e0e041 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.19]\n        cluster.go:125: [certs] Generating \"apiserver-kubelet-client\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-ca\" certificate and key\n        cluster.go:125: [certs] Generating \"front-proxy-client\" certificate and key\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/ca certificate authority generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/server certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/peer certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation\n        cluster.go:125: [certs] External etcd mode: Skipping apiserver-etcd-client certificate generation\n        cluster.go:125: [certs] Generating \"sa\" key and public key\n        cluster.go:125: [kubeconfig] Using kubeconfig folder \"/etc/kubernetes\"\n        cluster.go:125: [kubeconfig] Writing \"admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"super-admin.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"kubelet.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"controller-manager.conf\" kubeconfig file\n        cluster.go:125: [kubeconfig] Writing \"scheduler.conf\" kubeconfig file\n        cluster.go:125: [control-plane] Using manifest folder \"/etc/kubernetes/manifests\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-apiserver\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-controller-manager\"\n        cluster.go:125: [control-plane] Creating static Pod manifest for \"kube-scheduler\"\n        cluster.go:125: [kubelet-start] Writing kubelet environment file with flags to file \"/var/lib/kubelet/kubeadm-flags.env\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/instance-config.yaml\"\n        cluster.go:125: [patches] Applied patch of type \"application/strategic-merge-patch+json\" to target \"kubeletconfiguration\"\n        cluster.go:125: [kubelet-start] Writing kubelet configuration to file \"/var/lib/kubelet/config.yaml\"\n        cluster.go:125: [kubelet-start] Starting the kubelet\n        cluster.go:125: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory \"/etc/kubernetes/manifests\"\n        cluster.go:125: [kubelet-check] Waiting for a healthy kubelet at http://127.0.0.1:10248/healthz. This can take up to 4m0s\n        cluster.go:125: [kubelet-check] The kubelet is healthy after 502.495773ms\n        cluster.go:125: [control-plane-check] Waiting for healthy control plane components. This can take up to 30m0s\n        cluster.go:125: [control-plane-check] Checking kube-apiserver at https://10.0.0.19:6443/livez\n        cluster.go:125: [control-plane-check] Checking kube-controller-manager at https://127.0.0.1:10257/healthz\n        cluster.go:125: [control-plane-check] Checking kube-scheduler at https://127.0.0.1:10259/livez\n        cluster.go:125: [control-plane-check] kube-controller-manager is healthy after 4.77080388s\n        cluster.go:125: [control-plane-check] kube-scheduler is healthy after 5.585909007s\n        cluster.go:125: [control-plane-check] kube-apiserver is healthy after 7.000946583s\n        cluster.go:125: [upload-config] Storing the configuration used in ConfigMap \"kubeadm-config\" in the \"kube-system\" Namespace\n        cluster.go:125: [kubelet] Creating a ConfigMap \"kubelet-config\" in namespace kube-system with the configuration for the kubelets in the cluster\n        cluster.go:125: [upload-certs] Skipping phase. Please see --upload-certs\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--4513e0e041 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]\n        cluster.go:125: [mark-control-plane] Marking the node ci-4081.3.10--4513e0e041 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]\n        cluster.go:125: [bootstrap-token] Using token: yjishw.jv6uc4mr551kh2wg\n        cluster.go:125: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token\n        cluster.go:125: [bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster\n        cluster.go:125: [bootstrap-token] Creating the \"cluster-info\" ConfigMap in the \"kube-public\" namespace\n        cluster.go:125: [kubelet-finalize] Updating \"/etc/kubernetes/kubelet.conf\" to point to a rotatable kubelet client certificate and key\n        cluster.go:125: [addons] Applied essential addon: CoreDNS\n        cluster.go:125: [addons] Applied essential addon: kube-proxy\n        cluster.go:125: \n        cluster.go:125: Your Kubernetes control-plane has initialized successfully!\n        cluster.go:125: \n        cluster.go:125: To start using your cluster, you need to run the following as a regular user:\n        cluster.go:125: \n        cluster.go:125:   mkdir -p $HOME/.kube\n        cluster.go:125:   sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config\n        cluster.go:125:   sudo chown $(id -u):$(id -g) $HOME/.kube/config\n        cluster.go:125: \n        cluster.go:125: Alternatively, if you are the root user, you can run:\n        cluster.go:125: \n        cluster.go:125:   export KUBECONFIG=/etc/kubernetes/admin.conf\n        cluster.go:125: \n        cluster.go:125: You should now deploy a pod network to the cluster.\n        cluster.go:125: Run \"kubectl apply -f [podnetwork].yaml\" with one of the options listed at:\n        cluster.go:125:   https://kubernetes.io/docs/concepts/cluster-administration/addons/\n        cluster.go:125: \n        cluster.go:125: Then you can join any number of worker nodes by running the following on each as root:\n        cluster.go:125: \n        cluster.go:125: kubeadm join 10.0.0.19:6443 --token yjishw.jv6uc4mr551kh2wg \\\n        cluster.go:125: \t--discovery-token-ca-cert-hash sha256:c56a3f6ec893aaa23d368665fc5679c4d9d415c703327445c0212ade32fd1a3e \n        cluster.go:125: i  Using Cilium version 1.12.5\n        cluster.go:125: ? Auto-detected cluster name: kubernetes\n        cluster.go:125: ? Auto-detected datapath mode: tunnel\n        cluster.go:125: ? Auto-detected kube-proxy has been installed\n        cluster.go:125: i  helm template --namespace kube-system cilium cilium/cilium --version 1.12.5 --set cluster.id=0,cluster.name=kubernetes,encryption.nodeEncryption=false,extraConfig.cluster-pool-ipv4-cidr=192.168.0.0/17,extraConfig.enable-endpoint-routes=true,kubeProxyReplacement=disabled,operator.replicas=1,serviceAccounts.cilium.name=cilium,serviceAccounts.operator.name=cilium-operator,tunnel=vxlan\n        cluster.go:125: i  Storing helm values file in kube-system/cilium-cli-helm-values Secret\n        cluster.go:125: ? Created CA in secret cilium-ca\n        cluster.go:125: ? Generating certificates for Hubble...\n        cluster.go:125: ? Creating Service accounts...\n        cluster.go:125: ? Creating Cluster roles...\n        cluster.go:125: ? Creating ConfigMap for Cilium version 1.12.5...\n        cluster.go:125: i  Manual overwrite in ConfigMap: enable-endpoint-routes=true\n        cluster.go:125: i  Manual overwrite in ConfigMap: cluster-pool-ipv4-cidr=192.168.0.0/17\n        cluster.go:125: ? Creating Agent DaemonSet...\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n        cluster.go:125: ? Creating Operator Deployment...\n        cluster.go:125: ? Waiting for Cilium to be installed and ready...\n        cluster.go:125: ? Cilium was successfully installed! Run 'cilium status' to view installation health\n        cluster.go:125: \u001b[33m    /??\\\n        cluster.go:125: \u001b[36m /??\u001b[33m\\__/\u001b[32m??\\\u001b[0m    Cilium:         \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[36m \\__\u001b[31m/??\\\u001b[32m__/\u001b[0m    Operator:       \u001b[32mOK\u001b[0m\n        cluster.go:125: \u001b[32m /??\u001b[31m\\__/\u001b[35m??\\\u001b[0m    Hubble:         \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[32m \\__\u001b[34m/??\\\u001b[35m__/\u001b[0m    ClusterMesh:    \u001b[36mdisabled\u001b[0m\n        cluster.go:125: \u001b[34m    \\__/\n        cluster.go:125: \u001b[0m\n        cluster.go:125: Deployment       cilium-operator    \n        cluster.go:125: DaemonSet        cilium             \n        cluster.go:125: Containers:      cilium             \n        cluster.go:125:                  cilium-operator    \n        cluster.go:125: Cluster Pods:    0/0 managed by Cilium\n        cluster.go:125: W0904 02:31:22.221993    2354 joinconfiguration.go:112] [config] WARNING: Ignored configuration document with GroupVersionKind kubelet.config.k8s.io/v1beta1, Kind=KubeletConfiguration\n        cluster.go:125: \t[WARNING SystemVerification]: cgroups v1 support is in maintenance mode, please migrate to cgroups v2\n        cluster.go:125: \t[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'\n    --- PASS: kubeadm.v1.34.4.cilium.cgroupv1.base/node_readiness (21.68s)\n    --- PASS: kubeadm.v1.34.4.cilium.cgroupv1.base/nginx_deployment (10.03s)\n    --- PASS: kubeadm.v1.34.4.cilium.cgroupv1.base/NFS_deployment (20.66s)\n            cluster.go:125: jq: error (at \u003cstdin\u003e:123): Cannot iterate over null (null)\n    --- PASS: kubeadm.v1.34.4.cilium.cgroupv1.base/IPSec_encryption (22.20s)\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/mount-cgroup]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/apply-sysctl-overwrites]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/clean-cilium-state]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n            cluster.go:125: level=warning msg=\"spec.template.metadata.annotations[container.apparmor.security.beta.kubernetes.io/cilium-agent]: deprecated since v1.30; use the \\\"appArmorProfile\\\" field instead\" subsys=klog\n"},{"name":"cl.update.badverity","result":"PASS","duration":473695109544,"output":""},{"name":"coreos.ignition.ssh.key","result":"FAIL","duration":689052503359,"output":"        harness.go:651: Cluster failed starting machines: machine \"ci-4081.3.10--2098817cfd\" failed to start: ssh journalctl failed: time limit exceeded: ssh: handshake failed: ssh: unable to authenticate, attempted methods [none publickey], no supported methods remain\n"}],"result":"FAIL","platform":"azure","version":"4081.3.10"}