>>> Messages generated by process 1373 on 2026-07-16 01:16:37 -00 for package sys-apps/baselayout-3.6.8-r22:

QA: preinst
QA Notice: Symbolic link /usr/share/baselayout/motd points to /run/flatcar/motd which does not exist.
QA Notice: Symbolic link /etc/motd points to /run/flatcar/motd which does not exist.
QA Notice: Symbolic link /etc/lsb-release points to /usr/share/flatcar/lsb-release which does not exist.
LOG: postinst
Creating /etc/init.d/functions.sh symlink...

>>> Messages generated by process 1846 on 2026-07-16 01:16:38 -00 for package dev-libs/gmp-6.3.0-r1:

LOG: pretend
Using generic C implementation on non-amd64/x86 with USE=cpudetection
--enable-fat is a no-op on alternative arches.
To obtain an optimized build, set USE=-cpudetection, but binpkgs should not then be made.

>>> Messages generated by process 12528 on 2026-07-16 01:18:16 -00 for package net-libs/libmicrohttpd-1.0.1-r1:

WARN: pretend
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 12528 on 2026-07-16 01:18:29 -00 for package sys-apps/systemd-260.1-r1:

WARN: pretend
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 12528 on 2026-07-16 01:21:23 -00 for package acct-group/root-0-r2:

LOG: preinst
Adding group root

>>> Messages generated by process 12528 on 2026-07-16 01:21:23 -00 for package acct-group/wheel-0-r3:

LOG: preinst
Adding group wheel

>>> Messages generated by process 12528 on 2026-07-16 01:21:23 -00 for package acct-group/shadow-0:

LOG: preinst
Adding group shadow

>>> Messages generated by process 12528 on 2026-07-16 01:21:24 -00 for package acct-group/polkitd-0-r3:

WARN: install
ACCT_GROUP_POLKITD_ID=235 override in effect, support will not be provided.
LOG: preinst
Adding group polkitd

>>> Messages generated by process 12528 on 2026-07-16 01:21:24 -00 for package acct-group/tape-0-r3:

LOG: preinst
Adding group tape

>>> Messages generated by process 12528 on 2026-07-16 01:21:24 -00 for package acct-group/systemd-resolve-0-r3:

WARN: install
ACCT_GROUP_SYSTEMD_RESOLVE_ID=245 override in effect, support will not be provided.
LOG: preinst
Adding group systemd-resolve

>>> Messages generated by process 12528 on 2026-07-16 01:21:25 -00 for package acct-group/render-0-r3:

WARN: install
ACCT_GROUP_RENDER_ID=30 override in effect, support will not be provided.
LOG: preinst
Adding group render

>>> Messages generated by process 12528 on 2026-07-16 01:21:25 -00 for package acct-group/kmem-0-r3:

LOG: preinst
Adding group kmem

>>> Messages generated by process 12528 on 2026-07-16 01:21:26 -00 for package acct-group/systemd-timesync-0-r3:

LOG: preinst
Adding group systemd-timesync

>>> Messages generated by process 12528 on 2026-07-16 01:21:26 -00 for package acct-group/adm-0-r3:

LOG: preinst
Adding group adm

>>> Messages generated by process 12528 on 2026-07-16 01:21:26 -00 for package acct-group/dialout-0-r3:

WARN: install
ACCT_GROUP_DIALOUT_ID=249 override in effect, support will not be provided.
LOG: preinst
Adding group dialout

>>> Messages generated by process 12528 on 2026-07-16 01:21:26 -00 for package acct-group/disk-0-r3:

LOG: preinst
Adding group disk

>>> Messages generated by process 12528 on 2026-07-16 01:21:27 -00 for package acct-group/audio-0-r3:

LOG: preinst
Adding group audio

>>> Messages generated by process 12528 on 2026-07-16 01:21:27 -00 for package acct-group/cdrom-0-r3:

LOG: preinst
Adding group cdrom

>>> Messages generated by process 12528 on 2026-07-16 01:21:27 -00 for package acct-group/systemd-journal-0-r3:

WARN: install
ACCT_GROUP_SYSTEMD_JOURNAL_ID=248 override in effect, support will not be provided.
LOG: preinst
Adding group systemd-journal

>>> Messages generated by process 12528 on 2026-07-16 01:21:32 -00 for package acct-group/users-0-r2:

LOG: preinst
Adding group users

>>> Messages generated by process 12528 on 2026-07-16 01:21:32 -00 for package acct-group/tty-0-r3:

LOG: preinst
Adding group tty

>>> Messages generated by process 12528 on 2026-07-16 01:21:33 -00 for package acct-group/kvm-0-r3:

LOG: preinst
Adding group kvm

>>> Messages generated by process 12528 on 2026-07-16 01:21:33 -00 for package acct-group/sgx-0-r2:

LOG: preinst
Adding group sgx

>>> Messages generated by process 12528 on 2026-07-16 01:21:34 -00 for package acct-group/nobody-0-r2:

LOG: preinst
Adding group nobody

>>> Messages generated by process 12528 on 2026-07-16 01:21:34 -00 for package acct-group/input-0-r3:

WARN: install
ACCT_GROUP_INPUT_ID=28 override in effect, support will not be provided.
LOG: preinst
Adding group input

>>> Messages generated by process 12528 on 2026-07-16 01:21:35 -00 for package acct-group/systemd-coredump-0-r3:

LOG: preinst
Adding group systemd-coredump

>>> Messages generated by process 12528 on 2026-07-16 01:21:36 -00 for package acct-group/lp-0-r3:

LOG: preinst
Adding group lp

>>> Messages generated by process 12528 on 2026-07-16 01:21:36 -00 for package acct-group/messagebus-0-r3:

WARN: install
ACCT_GROUP_MESSAGEBUS_ID=201 override in effect, support will not be provided.
LOG: preinst
Adding group messagebus

>>> Messages generated by process 12528 on 2026-07-16 01:21:36 -00 for package acct-group/video-0-r3:

LOG: preinst
Adding group video

>>> Messages generated by process 12528 on 2026-07-16 01:21:36 -00 for package acct-group/clock-0:

LOG: preinst
Adding group clock

>>> Messages generated by process 12528 on 2026-07-16 01:21:37 -00 for package acct-group/systemd-network-0-r3:

WARN: install
ACCT_GROUP_SYSTEMD_NETWORK_ID=244 override in effect, support will not be provided.
LOG: preinst
Adding group systemd-network

>>> Messages generated by process 12528 on 2026-07-16 01:21:37 -00 for package acct-group/systemd-oom-0-r2:

LOG: preinst
Adding group systemd-oom

>>> Messages generated by process 12528 on 2026-07-16 01:21:38 -00 for package acct-group/systemd-journal-remote-0-r3:

WARN: install
ACCT_GROUP_SYSTEMD_JOURNAL_REMOTE_ID=242 override in effect, support will not be provided.
LOG: preinst
Adding group systemd-journal-remote

>>> Messages generated by process 12528 on 2026-07-16 01:21:38 -00 for package acct-group/utmp-0-r3:

LOG: preinst
Adding group utmp

>>> Messages generated by process 12528 on 2026-07-16 01:21:47 -00 for package sys-apps/kmod-34.2:

WARN: postinst
You need to add kmod-static-nodes to the sysinit runlevel for
kernel modules to have required static nodes!
Run this command:
	rc-update add kmod-static-nodes sysinit

>>> Messages generated by process 12528 on 2026-07-16 01:21:53 -00 for package net-libs/libmicrohttpd-1.0.1-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 12528 on 2026-07-16 01:21:54 -00 for package dev-libs/json-c-0.18:

QA: prepare
QA Notice: Compatibility with CMake < 3.10 will be removed in a future release.
See also tracker bug #964405; check existing or file a new bug for this package.
If not fixed in upstream's code repository, we should make sure they are aware.
The following files are causing warnings:
  tests/CMakeLists.txt:3.9
An upstreamable patch should take any resulting CMake policy changes
into account. See also:
  https://cmake.org/cmake/help/latest/manual/cmake-policies.7.html

>>> Messages generated by process 12528 on 2026-07-16 01:22:19 -00 for package acct-user/root-0-r3:

LOG: preinst
Adding user root

>>> Messages generated by process 12528 on 2026-07-16 01:22:20 -00 for package app-alternatives/bzip2-1:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/bin/bzip2
	/build/arm64-usr/bin/bunzip2
	/build/arm64-usr/bin/bzcat

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/bzip2-1' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 12528 on 2026-07-16 01:22:24 -00 for package acct-user/systemd-journal-remote-0-r3:

WARN: install
ACCT_USER_SYSTEMD_JOURNAL_REMOTE_ID=242 override in effect, support will not be provided.
LOG: preinst
Adding user systemd-journal-remote

>>> Messages generated by process 12528 on 2026-07-16 01:22:24 -00 for package acct-user/systemd-timesync-0-r3:

LOG: preinst
Adding user systemd-timesync

>>> Messages generated by process 12528 on 2026-07-16 01:22:24 -00 for package acct-user/systemd-network-0-r3:

WARN: install
ACCT_USER_SYSTEMD_NETWORK_ID=244 override in effect, support will not be provided.
LOG: preinst
Adding user systemd-network

>>> Messages generated by process 12528 on 2026-07-16 01:22:24 -00 for package acct-user/systemd-oom-0-r2:

LOG: preinst
Adding user systemd-oom

>>> Messages generated by process 12528 on 2026-07-16 01:22:25 -00 for package acct-user/messagebus-0-r3:

WARN: install
ACCT_USER_MESSAGEBUS_ID=201 override in effect, support will not be provided.
LOG: preinst
Adding user messagebus

>>> Messages generated by process 12528 on 2026-07-16 01:22:25 -00 for package acct-user/systemd-resolve-0-r3:

WARN: install
ACCT_USER_SYSTEMD_RESOLVE_ID=245 override in effect, support will not be provided.
LOG: preinst
Adding user systemd-resolve

>>> Messages generated by process 12528 on 2026-07-16 01:22:25 -00 for package acct-user/systemd-coredump-0-r3:

LOG: preinst
Adding user systemd-coredump

>>> Messages generated by process 12528 on 2026-07-16 01:22:25 -00 for package acct-user/polkitd-0-r3:

WARN: install
ACCT_USER_POLKITD_ID=235 override in effect, support will not be provided.
LOG: preinst
Adding user polkitd

>>> Messages generated by process 12528 on 2026-07-16 01:23:46 -00 for package acct-user/nobody-0-r2:

LOG: preinst
Adding user nobody

>>> Messages generated by process 12528 on 2026-07-16 01:23:50 -00 for package dev-libs/libxml2-2.15.3:

LOG: postinst
Skipping XML catalog creation for stage building (bug #208887).

>>> Messages generated by process 12528 on 2026-07-16 01:24:37 -00 for package sys-libs/pam-1.7.2:

WARN: postinst
Some software with pre-loaded PAM libraries might experience
warnings or failures related to missing symbols and/or versions
after any update. While unfortunate this is a limit of the
implementation of PAM and the software, and it requires you to
restart the software manually after the update.
You can get a list of such software running a command like
  lsof / | grep -E -i 'del.*libpam\.so'
Alternatively, simply reboot your system.

>>> Messages generated by process 12528 on 2026-07-16 01:24:39 -00 for package sys-apps/util-linux-2.41.4-r1:

LOG: postinst
The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
The agetty util now clears the terminal by default. You
might want to add --noclear to your /etc/inittab lines.

>>> Messages generated by process 12528 on 2026-07-16 01:25:21 -00 for package dev-libs/glib-2.84.4-r5:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
WARN: postinst
Updating of GSettings schemas skipped due to cross-compilation.
You might want to run glib-compile-schemas manually on the target
for your final image and re-run it when packages installing
GSettings schemas get upgraded or added to the image.
Updating of GIO modules cache skipped due to cross-compilation.
You might want to run gio-querymodules manually on the target for
your final image for performance reasons and re-run it when packages
installing GIO modules get upgraded or added to the image.

>>> Messages generated by process 12528 on 2026-07-16 01:27:00 -00 for package dev-libs/openssl-3.5.7:

QA: configure
Appending non-library to LIBS (-Wl,--push-state,--as-needed,-latomic,--pop-state); Other linker flags should be passed via LDFLAGS

>>> Messages generated by process 12528 on 2026-07-16 01:33:51 -00 for package sys-apps/systemd-260.1-r1:

LOG: postinst
To enable a useful set of services, run the following:
  systemctl preset-all --preset-mode=enable-only

>>> Messages generated by process 12528 on 2026-07-16 01:34:36 -00 for package sys-process/audit-4.1.4-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 12528 on 2026-07-16 01:34:53 -00 for package sys-auth/polkit-126-r3:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 12528 on 2026-07-16 01:36:11 -00 for package sec-policy/selinux-base-policy-2.20250618_p1-r1:

WARN: postinst
SELinux module load failed. Trying full reload...
Failed to reload SELinux policies.
If this is *not* the last SELinux module package being installed,
then you can safely ignore this as the reloads will be retried
with other, recent modules.
If it is the last SELinux module package being installed however,
then it is advised to look at the error above and take appropriate
action since the new SELinux policies are not loaded until the
command finished successfully.
To reload, run the following command:
  semodule -i /usr/share/selinux/targeted/*.pp
SELinux module load failed. Trying full reload...
Failed to reload SELinux policies.
If this is *not* the last SELinux module package being installed,
then you can safely ignore this as the reloads will be retried
with other, recent modules.
If it is the last SELinux module package being installed however,
then it is advised to look at the error above and take appropriate
action since the new SELinux policies are not loaded until the
command finished successfully.
To reload, run the following command:
  semodule -i /usr/share/selinux/mcs/*.pp
SELinux module load failed. Trying full reload...
Failed to reload SELinux policies.
If this is *not* the last SELinux module package being installed,
then you can safely ignore this as the reloads will be retried
with other, recent modules.
If it is the last SELinux module package being installed however,
then it is advised to look at the error above and take appropriate
action since the new SELinux policies are not loaded until the
command finished successfully.
To reload, run the following command:
  semodule -i /usr/share/selinux/mls/*.pp

>>> Messages generated by process 12528 on 2026-07-16 01:36:12 -00 for package sys-fs/lvm2-2.03.39:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.
Make sure the "lvm" init script is in the runlevels:
# rc-update add lvm boot
Make sure to enable lvmetad in /build/arm64-usr/etc/lvm/lvm.conf if you want
to enable lvm autoactivation and metadata caching.

>>> Messages generated by process 12528 on 2026-07-16 01:36:55 -00 for package sec-policy/selinux-unconfined-2.20250618_p1:

WARN: postinst
SELinux module load failed. Trying full reload...
Failed to reload SELinux policies.
If this is *not* the last SELinux module package being installed,
then you can safely ignore this as the reloads will be retried
with other, recent modules.
If it is the last SELinux module package being installed however,
then it is advised to look at the error above and take appropriate
action since the new SELinux policies are not loaded until the
command finished successfully.
To reload, run the following command:
  semodule -i /usr/share/selinux/targeted/*.pp
SELinux module load failed. Trying full reload...
Failed to reload SELinux policies.
If this is *not* the last SELinux module package being installed,
then you can safely ignore this as the reloads will be retried
with other, recent modules.
If it is the last SELinux module package being installed however,
then it is advised to look at the error above and take appropriate
action since the new SELinux policies are not loaded until the
command finished successfully.
To reload, run the following command:
  semodule -i /usr/share/selinux/mcs/*.pp
SELinux module load failed. Trying full reload...
Failed to reload SELinux policies.
If this is *not* the last SELinux module package being installed,
then you can safely ignore this as the reloads will be retried
with other, recent modules.
If it is the last SELinux module package being installed however,
then it is advised to look at the error above and take appropriate
action since the new SELinux policies are not loaded until the
command finished successfully.
To reload, run the following command:
  semodule -i /usr/share/selinux/mls/*.pp

>>> Messages generated by process 12528 on 2026-07-16 01:37:13 -00 for package sec-policy/selinux-dbus-2.20250618_p1:

WARN: postinst
SELinux module load failed. Trying full reload...
SELinux module load failed. Trying full reload...
SELinux module load failed. Trying full reload...

>>> Messages generated by process 12528 on 2026-07-16 01:37:28 -00 for package sys-apps/dbus-1.16.2:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
LOG: postinst
Some applications require a session bus in addition to the system
bus. Please see `man dbus-launch` for more information.
(Note: Above message is only printed the first time package is
installed. Please look at /usr/share/doc/dbus-1.16.2/README.gentoo*
for future reference)
WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 12528 on 2026-07-16 01:37:43 -00 for package sys-fs/cryptsetup-2.8.6-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1676 on 2026-07-16 02:19:08 -00 for package sys-power/acpid-2.0.34-r1:

WARN: pretend
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:19:10 -00 for package sys-apps/portage-3.0.81:

WARN: pretend
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:19:12 -00 for package sys-apps/systemd-260.1-r1:

WARN: pretend
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:23:39 -00 for package acct-group/tss-0-r3:

WARN: install
ACCT_GROUP_TSS_ID=252 override in effect, support will not be provided.
LOG: preinst
Adding group tss

>>> Messages generated by process 1676 on 2026-07-16 02:23:59 -00 for package acct-group/man-0-r3:

LOG: preinst
Adding group man

>>> Messages generated by process 1676 on 2026-07-16 02:24:01 -00 for package acct-group/sshd-0-r3:

WARN: install
ACCT_GROUP_SSHD_ID=204 override in effect, support will not be provided.
LOG: preinst
Adding group sshd

>>> Messages generated by process 1676 on 2026-07-16 02:24:02 -00 for package acct-group/netperf-0-r2:

LOG: preinst
Adding group netperf

>>> Messages generated by process 1676 on 2026-07-16 02:24:06 -00 for package acct-group/pcap-0-r1:

LOG: preinst
Adding group pcap

>>> Messages generated by process 1676 on 2026-07-16 02:24:08 -00 for package acct-group/jobserver-0:

LOG: preinst
Adding group jobserver

>>> Messages generated by process 1676 on 2026-07-16 02:24:09 -00 for package acct-group/floppy-0-r1:

LOG: preinst
Adding group floppy

>>> Messages generated by process 1676 on 2026-07-16 02:24:10 -00 for package acct-group/sssd-0:

LOG: preinst
Adding group sssd

>>> Messages generated by process 1676 on 2026-07-16 02:24:12 -00 for package acct-group/portage-0-r2:

LOG: preinst
Adding group portage

>>> Messages generated by process 1676 on 2026-07-16 02:24:13 -00 for package net-libs/libnfnetlink-1.0.2:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:24:14 -00 for package acct-group/ntp-0-r3:

WARN: install
ACCT_GROUP_NTP_ID=203 override in effect, support will not be provided.
LOG: preinst
Adding group ntp

>>> Messages generated by process 1676 on 2026-07-16 02:24:19 -00 for package acct-group/uucp-0-r3:

LOG: preinst
Adding group uucp

>>> Messages generated by process 1676 on 2026-07-16 02:24:21 -00 for package sys-apps/keyutils-1.6.3-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:24:21 -00 for package acct-group/docker-0-r3:

WARN: install
ACCT_GROUP_DOCKER_ID=233 override in effect, support will not be provided.
LOG: preinst
Adding group docker

>>> Messages generated by process 1676 on 2026-07-16 02:24:27 -00 for package sys-power/acpid-2.0.34-r1:

LOG: postinst
You may wish to read the Gentoo Linux Power Management Guide,
which can be found online at:
https://wiki.gentoo.org/wiki/Power_management/Guide

>>> Messages generated by process 1676 on 2026-07-16 02:24:29 -00 for package sys-apps/kexec-tools-2.0.32-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:24:50 -00 for package net-misc/bridge-utils-1.7.1-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:24:54 -00 for package sys-apps/less-692:

LOG: preinst
Install additional packages for optional runtime features:
  dev-python/pygments for Colorized output support

>>> Messages generated by process 1676 on 2026-07-16 02:25:09 -00 for package dev-cpp/gflags-2.2.2-r1:

QA: prepare
QA Notice: Compatibility with CMake < 3.5 has been removed from CMake 4,
dev-cpp/gflags will fail to build w/o a fix.
See also tracker bug #951350; check existing or file a new bug for this package.
Please also take it upstream.
The following files are causing errors:
  CMakeLists.txt:3.0.2
  test/config/CMakeLists.txt:2.8.12
  test/nc/CMakeLists.txt:2.8.12
Compatibility with CMake < 3.10 will be removed in a future release.
See also tracker bug #964405; check existing or file a new bug for this package.
If not fixed in upstream's code repository, we should make sure they are aware.
CMake 4 detected; building with -DCMAKE_POLICY_VERSION_MINIMUM=3.5
This is merely a workaround to avoid CMake Error and *not* a permanent fix;
there may be new build or runtime bugs as a result.
An upstreamable patch should take any resulting CMake policy changes
into account. See also:
  https://cmake.org/cmake/help/latest/manual/cmake-policies.7.html

>>> Messages generated by process 1676 on 2026-07-16 02:25:31 -00 for package app-containers/docker-cli-29.1.3:

WARN: postinst
the 'docker build' command is deprecated and will be removed in a
future release. If you need this functionality, install
app-containers/docker-buildx.

>>> Messages generated by process 1676 on 2026-07-16 02:25:35 -00 for package dev-libs/protobuf-21.12:

QA: prepare
QA Notice: Compatibility with CMake < 3.5 has been removed from CMake 4,
dev-libs/protobuf will fail to build w/o a fix.
See also tracker bug #951350; check existing or file a new bug for this package.
Please also take it upstream.
The following files are causing errors:
  examples/CMakeLists.txt:2.8.12
Compatibility with CMake < 3.10 will be removed in a future release.
See also tracker bug #964405; check existing or file a new bug for this package.
If not fixed in upstream's code repository, we should make sure they are aware.
The following files are causing warnings:
  CMakeLists.txt:3.5
  cmake/CMakeLists.txt:3.5
CMake 4 detected; building with -DCMAKE_POLICY_VERSION_MINIMUM=3.5
This is merely a workaround to avoid CMake Error and *not* a permanent fix;
there may be new build or runtime bugs as a result.
An upstreamable patch should take any resulting CMake policy changes
into account. See also:
  https://cmake.org/cmake/help/latest/manual/cmake-policies.7.html

>>> Messages generated by process 1676 on 2026-07-16 02:25:36 -00 for package dev-debug/gdb-17.1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:28:55 -00 for package acct-user/tss-0-r3:

WARN: install
ACCT_USER_TSS_ID=236 override in effect, support will not be provided.
LOG: preinst
Adding user tss

>>> Messages generated by process 1676 on 2026-07-16 02:28:59 -00 for package app-alternatives/sh-0:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/bin/sh

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/sh-0' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 1676 on 2026-07-16 02:29:01 -00 for package acct-user/ntp-0-r3:

WARN: install
ACCT_USER_NTP_ID=203 override in effect, support will not be provided.
LOG: preinst
Adding user ntp

>>> Messages generated by process 1676 on 2026-07-16 02:29:03 -00 for package acct-user/man-1-r3:

LOG: preinst
Adding user man

>>> Messages generated by process 1676 on 2026-07-16 02:29:04 -00 for package acct-user/portage-0-r4:

LOG: preinst
Adding user portage

>>> Messages generated by process 1676 on 2026-07-16 02:29:06 -00 for package net-libs/libnetfilter_conntrack-1.1.1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:29:09 -00 for package app-alternatives/gzip-1:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/bin/gzip
	/build/arm64-usr/bin/gunzip
	/build/arm64-usr/bin/zcat

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/gzip-1' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 1676 on 2026-07-16 02:29:11 -00 for package app-alternatives/cpio-0:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/bin/cpio

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/cpio-0' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 1676 on 2026-07-16 02:29:11 -00 for package net-libs/libnetfilter_queue-1.0.5-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:29:12 -00 for package acct-user/pcap-0-r1:

LOG: preinst
Adding user pcap

>>> Messages generated by process 1676 on 2026-07-16 02:29:12 -00 for package net-libs/libnetfilter_cthelper-1.0.1-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:29:12 -00 for package app-alternatives/bc-0:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/usr/bin/bc
	/build/arm64-usr/usr/bin/dc

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/bc-0' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 1676 on 2026-07-16 02:29:14 -00 for package acct-user/sshd-0-r3:

WARN: install
ACCT_USER_SSHD_ID=204 override in effect, support will not be provided.
LOG: preinst
Adding user sshd

>>> Messages generated by process 1676 on 2026-07-16 02:29:16 -00 for package acct-user/netperf-0-r2:

LOG: preinst
Adding user netperf

>>> Messages generated by process 1676 on 2026-07-16 02:29:17 -00 for package acct-user/sssd-0:

LOG: preinst
Adding user sssd

>>> Messages generated by process 1676 on 2026-07-16 02:29:24 -00 for package net-libs/libnetfilter_cttimeout-1.0.1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:29:24 -00 for package sys-cluster/ipvsadm-1.31-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:29:26 -00 for package net-libs/libnftnl-1.3.1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:29:29 -00 for package dev-util/debugedit-5.3:

QA: install
QA Notice: command not found:

	./configure: line 9604: gdb: command not found
	checking gdb and dwz versions for gdb-add-index tests... -vs-./configure: line 9609: dwz: command not found../configure: line 9609: dwz: command not found
LOG: postinst
Install additional packages for optional runtime features:
  sys-devel/dwz for dwz support in find-debuginfo

>>> Messages generated by process 1676 on 2026-07-16 02:29:35 -00 for package net-firewall/ebtables-2.0.11-r3:

LOG: postinst
Current ebtables implementation is unset, setting to ebtables-legacy
Ackchyually, we are setting it to xtables-nft-multi

>>> Messages generated by process 1676 on 2026-07-16 02:29:39 -00 for package dev-util/bpftool-7.7.0-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
WARN: prepare
Using bpf-toolchain instead of clang due to USE=-clang.
Please report any odd behaviours you observe, since using gcc for BPF
is still under development in both the Linux kernel and gcc itself.
QA: install
QA Notice: command not found:

	/bin/sh: line 1: bpf-unknown-none-gcc: command not found
	/bin/sh: line 1: bpf-unknown-none-gcc: command not found

>>> Messages generated by process 1676 on 2026-07-16 02:34:55 -00 for package net-analyzer/openbsd-netcat-1.219_p1:

WARN: postinst
SO_REUSEPORT is introduced in linux 3.9. If your running kernel is older
and kernel header is newer, nc will not listen correctly. Matching the header
to the running kernel will do. See bug #490246 for details.

>>> Messages generated by process 1676 on 2026-07-16 02:34:57 -00 for package app-alternatives/tar-0:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/bin/tar

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/tar-0' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 1676 on 2026-07-16 02:35:00 -00 for package app-alternatives/lex-0-r1:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/usr/bin/lex

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/lex-0-r1' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 1676 on 2026-07-16 02:35:01 -00 for package app-admin/logrotate-3.22.0:

LOG: postinst
The logrotate binary is now installed under /usr/bin. Please
update your links
logrotate state file is now located at /var/lib/misc/logrotate.status
See bug #357275
WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.
LOG: postinst
If you wish to have logrotate e-mail you updates, please
emerge virtual/mailx and configure logrotate in
/etc/logrotate.conf appropriately
Additionally, /etc/logrotate.conf may need to be modified
for your particular needs. See man logrotate for details.

>>> Messages generated by process 1676 on 2026-07-16 02:35:01 -00 for package dev-util/pahole-1.30:

QA: prepare
QA Notice: Compatibility with CMake < 3.10 will be removed in a future release.
See also tracker bug #964405; check existing or file a new bug for this package.
If not fixed in upstream's code repository, we should make sure they are aware.
The following files are causing warnings:
  CMakeLists.txt:3.5
An upstreamable patch should take any resulting CMake policy changes
into account. See also:
  https://cmake.org/cmake/help/latest/manual/cmake-policies.7.html

>>> Messages generated by process 1676 on 2026-07-16 02:35:17 -00 for package sys-fs/mdadm-4.6-r1:

LOG: postinst
If you're not relying on kernel auto-detect of your RAID
devices, you need to add 'mdraid' to your 'boot' runlevel:
	rc-update add mdraid boot

>>> Messages generated by process 1676 on 2026-07-16 02:35:26 -00 for package net-firewall/nftables-1.1.6:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
LOG: postinst
If you wish to enable the firewall rules on boot (on systemd) you
will need to enable the nftables-load service.
    'systemctl enable nftables-load.service'
Enable nftables-store.service if you want firewall rules to be
saved at shutdown.

>>> Messages generated by process 1676 on 2026-07-16 02:35:30 -00 for package net-firewall/iptables-1.8.13:

LOG: postinst
Current iptables implementation is unset, setting to xtables-legacy-multi
Ackchyually, we are setting it to xtables-nft-multi

>>> Messages generated by process 1676 on 2026-07-16 02:35:34 -00 for package app-crypt/trousers-0.3.15-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:35:37 -00 for package dev-libs/luksmeta-9-r1:

QA: install
QA Notice: Automake "maintainer mode" detected:

	CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/build/arm64-usr/var/tmp/portage/dev-libs/luksmeta-9-r1/work/luksmeta-9/missing' aclocal-1.18 
	CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/build/arm64-usr/var/tmp/portage/dev-libs/luksmeta-9-r1/work/luksmeta-9/missing' autoconf
	 cd . && /bin/sh /build/arm64-usr/var/tmp/portage/dev-libs/luksmeta-9-r1/work/luksmeta-9/missing automake-1.18 --foreign

If you patch Makefile.am, configure.in,  or configure.ac then you
should use autotools.eclass and eautomake or eautoreconf. Exceptions
are limited to system packages for which it is impossible to run
autotools during stage building. See https://wiki.gentoo.org/wiki/Proj
ect:Quality_Assurance/Autotools_failures for more information.

>>> Messages generated by process 1676 on 2026-07-16 02:35:45 -00 for package dev-libs/cyrus-sasl-2.1.28-r5:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.
LOG: postinst
pwcheck and saslauthd home directories have moved to:
  /run/saslauthd, using tmpfiles.d
QA: other
QA Notice: systemd units using /etc/conf.d detected:
/usr/lib/systemd/system/saslauthd.service:EnvironmentFile=/etc/conf.d/saslauthd
See: https://wiki.gentoo.org/wiki/Project:Systemd/conf.d_files

>>> Messages generated by process 1676 on 2026-07-16 02:35:46 -00 for package sys-apps/man-db-2.13.1-r1:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1676 on 2026-07-16 02:35:48 -00 for package sys-apps/coreutils-9.11:

WARN: postinst
Make sure you run 'hash -r' in your active shells.
You should also re-source your shell settings for LS_COLORS
  changes, such as: source /etc/profile

>>> Messages generated by process 1676 on 2026-07-16 02:35:52 -00 for package app-emulation/qemu-guest-agent-9.2.0:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
LOG: postinst
You should add 'qemu-guest-agent' to the default runlevel.
e.g. rc-update add qemu-guest-agent default

>>> Messages generated by process 1676 on 2026-07-16 02:36:54 -00 for package app-alternatives/yacc-1-r2:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/usr/bin/yacc

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/yacc-1-r2' merged despite file collisions.
If necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 1676 on 2026-07-16 02:37:03 -00 for package net-vpn/wireguard-tools-1.0.20250521-r1:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:37:07 -00 for package app-containers/runc-1.4.3:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version
ERROR: setup
  CONFIG_BLK_CGROUP_IOCOST:	 is not set when it should be.
WARN: setup
Please check to make sure these options are set correctly.
Failure to do so may cause unexpected problems.

>>> Messages generated by process 1676 on 2026-07-16 02:37:08 -00 for package net-firewall/ipset-7.24:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux

>>> Messages generated by process 1676 on 2026-07-16 02:37:12 -00 for package net-firewall/conntrack-tools-1.4.9:

WARN: setup
Unable to find kernel sources at /build/arm64-usr/usr/src/linux
Unable to calculate Linux Kernel version for build, attempting to use running version

>>> Messages generated by process 1676 on 2026-07-16 02:40:19 -00 for package app-alternatives/gpg-1-r3:

ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / <filename>` to identify the installed package that owns a
file. If portageq reports that only one package owns a file then do
NOT file a bug report. A bug report is only useful if it identifies at
least two or more packages that are known to install the same file(s).
If a collision occurs and you can not explain where the file came from
then you should simply ignore the collision since there is not enough
information to determine if a real problem exists. Please do NOT file
a bug report at https://bugs.gentoo.org/ unless you report exactly
which two packages install the same file(s). See
https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
to solve the problem. And once again, please do NOT file a bug report
unless you have completely understood the above message.

Detected file collision(s):

	/build/arm64-usr/usr/bin/gpg
	/build/arm64-usr/usr/bin/gpgv

Searching all installed packages for file collisions...

Press Ctrl-C to Stop

WARN: preinst
None of the installed packages claim the file(s).

Package 'app-alternatives/gpg-1-r3' merged despite file collisions. If
necessary, refer to your elog messages for the whole content of the
above message.

>>> Messages generated by process 1676 on 2026-07-16 02:40:29 -00 for package sys-apps/busybox-1.36.1-r4:

WARN: configure
Could not locate user configfile, so we will save a default one
LOG: install
Your configuration for sys-apps/busybox-1.36.1-r4 has been saved in 
"/etc/portage/savedconfig/sys-apps/busybox-1.36.1-r4" for your editing pleasure.
You can edit these files by hand and remerge this package with
USE=savedconfig to customise the configuration.
You can rename this file/directory to one of the following for
its configuration to apply to multiple versions:
${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
[${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
LOG: postinst
If you want a smaller executable, add `-Oz` to your busybox `CFLAGS`.
(Note: Above message is only printed the first time package is
installed. Please look at /usr/share/doc/busybox-1.36.1-r4/README.gentoo*
for future reference)

>>> Messages generated by process 1676 on 2026-07-16 02:40:32 -00 for package sys-apps/util-linux-2.41.4-r1:

LOG: postinst
The mesg/wall/write tools have been disabled due to USE=-tty-helpers.

>>> Messages generated by process 1676 on 2026-07-16 02:40:35 -00 for package net-nds/openldap-2.6.8-r1:

QA: configure
Please use append-cppflags for preprocessor flags

>>> Messages generated by process 1676 on 2026-07-16 02:40:36 -00 for package sys-boot/grub-2.12-r12:

QA: install
QA Notice: Automake "maintainer mode" detected:

	 cd /build/arm64-usr/var/tmp/portage/sys-boot/grub-2.12-r12/work/grub-2.12 && /bin/sh /build/arm64-usr/var/tmp/portage/sys-boot/grub-2.12-r12/work/grub-2.12/build-aux/missing automake-1.18 --gnu grub-core/Makefile

If you patch Makefile.am, configure.in,  or configure.ac then you
should use autotools.eclass and eautomake or eautoreconf. Exceptions
are limited to system packages for which it is impossible to run
autotools during stage building. See https://wiki.gentoo.org/wiki/Proj
ect:Quality_Assurance/Autotools_failures for more information.
LOG: postinst
For information on how to configure GRUB2 please refer to the guide:
    https://wiki.gentoo.org/wiki/GRUB2_Quick_Start
Install additional packages for optional runtime features:
  sys-boot/os-prober for detecting other operating systems (grub-mkconfig)
  dev-libs/libisoburn for creating rescue media (grub-mkrescue)
  sys-fs/mtools for creating rescue media (grub-mkrescue)
  sys-kernel/installkernel[grub] for automatically updating GRUB's configuration on each kernel installation

>>> Messages generated by process 1676 on 2026-07-16 02:40:52 -00 for package sys-kernel/coreos-sources-6.12.95:

LOG: postinst
If you are upgrading from a previous kernel, you may be interested
in the following document:
  - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade
Install additional packages for optional runtime features:
  sys-kernel/installkernel for versioned kernel image installation and optionally automating tasks such as generating an initramfs or unified kernel image
QA: other
QA Notice: RESTRICT=binchecks prevented checks on these ELF files:
/usr/src/linux-6.12.95-coreos/tools/testing/selftests/tc-testing/action-ebpf

>>> Messages generated by process 1676 on 2026-07-16 02:48:05 -00 for package dev-vcs/git-2.53.0:

LOG: postinst
Please read /usr/share/bash-completion/completions/git for Git bash command
completion.
Please read /usr/share/git/git-prompt.sh for Git bash prompt
Note that the prompt bash code is now in that separate script
Some scripts require additional dependencies:
  dev-util/quilt for git-quiltimport
  www-servers/lighttpd for git-instaweb
  www-servers/apache for git-instaweb
  www-servers/nginx for git-instaweb

>>> Messages generated by process 1676 on 2026-07-16 02:48:08 -00 for package app-crypt/tpm2-tss-4.1.3-r2:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1676 on 2026-07-16 02:48:10 -00 for package app-admin/sudo-1.9.17_p2:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.
sudo uses the /build/arm64-usr/etc/ldap.conf.sudo file for ldap configuration.
LOG: postinst
To use the -A (askpass) option, you need to install a compatible
password program from the following list. Starred packages will
automatically register for the use with sudo (but will not force
the -A option):
 [*] net-misc/ssh-askpass-fullscreen
     net-misc/x11-ssh-askpass
You can override the choice by setting the SUDO_ASKPASS environmnent
variable to the program you want to use.

>>> Messages generated by process 1676 on 2026-07-16 02:48:11 -00 for package net-fs/nfs-utils-2.8.5:

QA: other
QA Notice: The following files contain insecure RUNPATHs
 Please file a bug about this at https://bugs.gentoo.org/
 with the maintainer of the package.
  /build/arm64-usr/var/tmp/portage/net-fs/nfs-utils-2.8.5/image/usr/sbin/rpc.gssdn    RPATH: /build/arm64-usr/usr/lib
  /build/arm64-usr/var/tmp/portage/net-fs/nfs-utils-2.8.5/image/usr/sbin/rpc.svcgssdn    RPATH: /build/arm64-usr/usr/lib


>>> Messages generated by process 1676 on 2026-07-16 02:48:12 -00 for package sys-kernel/coreos-modules-6.12.95:

LOG: prepare
Building using config /build/arm64-usr/var/tmp/portage/sys-kernel/coreos-modules-6.12.95/files/arm64_defconfig-6.12 and /build/arm64-usr/var/tmp/portage/sys-kernel/coreos-modules-6.12.95/files/commonconfig-6.12
QA: install
QA Notice: Unresolved soname dependencies:

	/usr/lib/modules/6.12.95-flatcar/build/tools/bpf/resolve_btfids/resolve_btfids: libc.so.6 libelf.so.1 libz.so.1

QA: other
QA Notice: RESTRICT=binchecks prevented checks on these ELF files:
/usr/lib/modules/6.12.95-flatcar/build/scripts/selinux/mdp/mdp
/usr/lib/modules/6.12.95-flatcar/build/scripts/selinux/genheaders/genheaders
/usr/lib/modules/6.12.95-flatcar/build/scripts/mod/modpost
/usr/lib/modules/6.12.95-flatcar/build/scripts/basic/fixdep
/usr/lib/modules/6.12.95-flatcar/build/scripts/sign-file
/usr/lib/modules/6.12.95-flatcar/build/scripts/kallsyms
/usr/lib/modules/6.12.95-flatcar/build/scripts/sorttable
/usr/lib/modules/6.12.95-flatcar/build/scripts/asn1_compiler
/usr/lib/modules/6.12.95-flatcar/build/tools/bpf/resolve_btfids/resolve_btfids

>>> Messages generated by process 1676 on 2026-07-16 02:48:56 -00 for package sys-kernel/coreos-firmware-20260519:

LOG: postinst
If you are only interested in particular firmware files, edit the saved
configfile and remove those that you do not want.

>>> Messages generated by process 1676 on 2026-07-16 02:49:03 -00 for package sys-fs/cryptsetup-2.8.6-r1:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1676 on 2026-07-16 02:50:41 -00 for package app-portage/gentoolkit-0.7.2:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.
LOG: postinst
For further information on gentoolkit, please read the gentoolkit
guide: https://wiki.gentoo.org/wiki/Gentoolkit
Another alternative to equery is app-portage/portage-utils
Additional tools that may be of interest:
    app-admin/eclean-kernel
    app-portage/diffmask
    app-portage/flaggie
    app-portage/portpeek
    app-portage/smart-live-rebuild

>>> Messages generated by process 1676 on 2026-07-16 02:50:46 -00 for package sys-apps/systemd-260.1-r1:

LOG: postrm
One or more symlinks to directories have been preserved in order to
ensure that files installed via these symlinks remain accessible. This
indicates that the mentioned symlink(s) may be obsolete remnants of an
old install, and it may be appropriate to replace a given symlink with
the directory that it points to.

	/build/arm64-usr/usr/lib64/systemd


>>> Messages generated by process 1676 on 2026-07-16 02:51:02 -00 for package sys-libs/pam-1.7.2:

WARN: postinst
Some software with pre-loaded PAM libraries might experience
warnings or failures related to missing symbols and/or versions
after any update. While unfortunate this is a limit of the
implementation of PAM and the software, and it requires you to
restart the software manually after the update.
You can get a list of such software running a command like
  lsof / | grep -E -i 'del.*libpam\.so'
Alternatively, simply reboot your system.

>>> Messages generated by process 1676 on 2026-07-16 02:51:36 -00 for package sys-fs/lvm2-2.03.39:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1676 on 2026-07-16 02:52:18 -00 for package sys-fs/multipath-tools-0.14.3:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.
LOG: postinst
If you need multipath on your system, you must
add 'multipath' into your boot runlevel!

>>> Messages generated by process 1676 on 2026-07-16 02:52:18 -00 for package sys-auth/realmd-0.17.0-r2:

QA: other
QA Notice: One or more empty directories installed to /var:
  /var/lib/cache/realmd
  /var/lib/lib/realmd
If those directories need to be preserved, please make sure to create
or mark them for keeping using 'keepdir'. Portage for >= EAPI 8 ebuilds
will strip empty directories from installation image.

>>> Messages generated by process 1676 on 2026-07-16 02:52:22 -00 for package sys-kernel/dracut-110-r5:

LOG: postinst
Install additional packages for optional runtime features:
  net-misc/networkmanager for Networking support
  net-fs/cifs-utils for Support CIFS
  app-shells/dash for Allows use of dash instead of default bash (on your own risk)
  >=sys-boot/plymouth-0.8.5-r5 for Plymouth boot splash
  sys-block/nbd for Support network block devices
  virtual/openssh for Install ssh and scp along with config files and specified keys
  app-admin/rsyslog for Enable logging with rsyslog
  net-wireless/bluez for Support Bluetooth (experimental)
  sys-apps/biosdevname for Support BIOS-given device names
  sys-apps/rng-tools for Enable rngd service to help generating entropy early during boot
  sys-apps/systemd[boot] for building Unified Kernel Images with dracut (--uefi)
  sys-apps/systemd-utils[boot] for building Unified Kernel Images with dracut (--uefi)
  sys-kernel/installkernel[dracut] for automatically generating an initramfs on each kernel installation
  sys-kernel/installkernel[dracut,uki] for automatically generating an UKI on each kernel installation

>>> Messages generated by process 1676 on 2026-07-16 02:56:01 -00 for package sys-apps/azure-vm-utils-0.7.0:

QA: prepare
QA Notice: Compatibility with CMake < 3.10 will be removed in a future release.
See also tracker bug #964405; check existing or file a new bug for this package.
If not fixed in upstream's code repository, we should make sure they are aware.
The following files are causing warnings:
  CMakeLists.txt:3.5
An upstreamable patch should take any resulting CMake policy changes
into account. See also:
  https://cmake.org/cmake/help/latest/manual/cmake-policies.7.html

>>> Messages generated by process 1676 on 2026-07-16 02:56:07 -00 for package app-containers/docker-28.2.2:

LOG: postinst
To use Docker, the Docker daemon must be running as root. To automatically
start the Docker daemon at boot:
  systemctl enable docker.service
To use Docker as a non-root user, add yourself to the 'docker' group:
  usermod -aG docker <youruser>
Install additional packages for optional runtime features:
  sys-apps/rootlesskit for rootless mode support
for rootless mode you also need a network stack
  app-containers/slirp4netns for rootless mode network stack

>>> Messages generated by process 1676 on 2026-07-16 02:56:09 -00 for package net-misc/openssh-10.3_p1:

LOG: postinst
Install additional packages for optional runtime features:
  x11-apps/xauth for x11 forwarding

>>> Messages generated by process 1676 on 2026-07-16 02:56:12 -00 for package net-misc/ntp-4.2.8_p18-r3:

QA: install
QA Notice: Automake "maintainer mode" detected:

	CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/build/arm64-usr/var/tmp/portage/net-misc/ntp-4.2.8_p18-r3/work/ntp-4.2.8p18/sntp/libevent/build-aux/missing' aclocal-1.18 -I m4 -I libevent/m4 -I libopts/m4
	CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/build/arm64-usr/var/tmp/portage/net-misc/ntp-4.2.8_p18-r3/work/ntp-4.2.8p18/sntp/libevent/build-aux/missing' autoconf
	 cd . && /bin/sh /build/arm64-usr/var/tmp/portage/net-misc/ntp-4.2.8_p18-r3/work/ntp-4.2.8p18/sntp/libevent/build-aux/missing automake-1.18 --foreign
	(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/build/arm64-usr/var/tmp/portage/net-misc/ntp-4.2.8_p18-r3/work/ntp-4.2.8p18/sntp/libevent/build-aux/missing' autoheader)

If you patch Makefile.am, configure.in,  or configure.ac then you
should use autotools.eclass and eautomake or eautoreconf. Exceptions
are limited to system packages for which it is impossible to run
autotools during stage building. See https://wiki.gentoo.org/wiki/Proj
ect:Quality_Assurance/Autotools_failures for more information.
WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1676 on 2026-07-16 02:56:12 -00 for package net-dns/bind-9.18.42:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1676 on 2026-07-16 02:56:12 -00 for package net-fs/samba-4.23.6:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1676 on 2026-07-16 02:56:31 -00 for package coreos-base/coreos-init-0.0.1-r206:

QA: preinst
QA Notice: Symbolic link /etc/issue points to /run/issue which does not exist.

>>> Messages generated by process 1676 on 2026-07-16 02:56:32 -00 for package net-fs/cifs-utils-7.5:

WARN: postinst
setuid use flag was dropped due to multiple security implications
such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
You are free to set setuid flags by yourself

>>> Messages generated by process 1676 on 2026-07-16 02:59:32 -00 for package sys-auth/sssd-2.13.0:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.
LOG: postinst
You must set up sssd.conf (default installed into /etc/sssd)
and (optionally) configuration in /etc/pam.d in order to use SSSD
features.
WARN: postinst
sssctl analyze will not work because the python USE flag is disabled.

>>> Messages generated by process 1676 on 2026-07-16 02:59:32 -00 for package sys-kernel/coreos-kernel-6.12.95:

QA: other
QA Notice: RESTRICT=binchecks prevented checks on these ELF files:
/usr/lib/debug/usr/boot/vmlinux-6.12.95-flatcar
/usr/lib/debug/usr/lib/modules/6.12.95-flatcar/vdso/vdso.so

>>> Messages generated by process 1953076 on 2026-07-16 03:00:04 -00 for package dev-libs/rapidjson-1.1.0-r5:

QA: prepare
QA Notice: Compatibility with CMake < 3.10 will be removed in a future release.
See also tracker bug #964405; check existing or file a new bug for this package.
If not fixed in upstream's code repository, we should make sure they are aware.
The following files are causing warnings:
  example/CMakeLists.txt:3.5
  CMakeLists.txt:3.5
An upstreamable patch should take any resulting CMake policy changes
into account. See also:
  https://cmake.org/cmake/help/latest/manual/cmake-policies.7.html

>>> Messages generated by process 1954835 on 2026-07-16 03:01:28 -00 for package sys-fs/overlaybd-1.0.17:

LOG: install
Scanning '/build/arm64-usr/var/tmp/portage/sys-fs/overlaybd-1.0.17/image/usr/local/overlaybd/' and generating tmpfiles symlink entries...
QA: other
QA Notice: Package triggers severe warnings which indicate that it
           may exhibit random runtime failures.
/build/arm64-usr/var/tmp/portage/sys-fs/overlaybd-1.0.17/work/overlaybd-1.0.17_build/_deps/photon-src/include/photon/common/range-lock.h:72:34: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
/build/arm64-usr/var/tmp/portage/sys-fs/overlaybd-1.0.17/work/overlaybd-1.0.17_build/_deps/photon-src/include/photon/common/range-lock.h:90:30: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
/build/arm64-usr/var/tmp/portage/sys-fs/overlaybd-1.0.17/work/overlaybd-1.0.17_build/_deps/photon-src/include/photon/common/range-lock.h:103:30: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
/build/arm64-usr/var/tmp/portage/sys-fs/overlaybd-1.0.17/work/overlaybd-1.0.17/src/api_server.cpp:176:1: warning: no return statement in function returning non-void [-Wreturn-type]
Please do not file a Gentoo bug and instead report the above QA issues directly
to the upstream developers of this software.
Homepage: https://containerd.github.io/overlaybd

>>> Messages generated by process 1980838 on 2026-07-16 03:02:42 -00 for package acct-group/dnsmasq-0-r3:

LOG: preinst
Adding group dnsmasq

>>> Messages generated by process 1980838 on 2026-07-16 03:02:42 -00 for package acct-group/incus-0:

LOG: preinst
Adding group incus

>>> Messages generated by process 1980838 on 2026-07-16 03:02:42 -00 for package acct-group/cuse-0:

LOG: preinst
Adding group cuse

>>> Messages generated by process 1980838 on 2026-07-16 03:02:43 -00 for package acct-group/lxc-0-r2:

LOG: preinst
Adding group lxc

>>> Messages generated by process 1980838 on 2026-07-16 03:02:43 -00 for package acct-group/incus-admin-0:

LOG: preinst
Adding group incus-admin

>>> Messages generated by process 1980838 on 2026-07-16 03:03:00 -00 for package acct-user/dnsmasq-0-r3:

LOG: preinst
Adding user dnsmasq

>>> Messages generated by process 1980838 on 2026-07-16 03:03:00 -00 for package sys-fs/fuse-common-3.10.4-r3:

WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.

>>> Messages generated by process 1980838 on 2026-07-16 03:03:00 -00 for package acct-user/lxc-0-r2:

LOG: preinst
Adding user lxc

>>> Messages generated by process 1980838 on 2026-07-16 03:03:29 -00 for package app-containers/lxc-6.0.5:

LOG: postinst
Please refer to 
https://wiki.gentoo.org/wiki/LXC for introduction and usage guide.
Run 'lxc-checkconfig' to see optional kernel features.
Install additional packages for optional runtime features:
  app-containers/distrobuilder for creating your own LXC containers
  app-containers/lxc-templates for automatic template scripts
  dev-util/debootstrap for Debian-based distribution container image support
  sys-process/criu for snapshot & restore functionality
QA: other
QA Notice: Package triggers severe warnings which indicate that it
           may exhibit random runtime failures.
../lxc-6.0.5/src/lxc/cmd/lxc_monitord.c:327:21: warning: variable 'lxcpath' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
../lxc-6.0.5/src/lxc/cmd/lxc_monitord.c:329:14: warning: variable 'monitord_created' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
../lxc-6.0.5/src/lxc/cmd/lxc_monitord.c:330:14: warning: variable 'persistent' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
Please do not file a Gentoo bug and instead report the above QA issues directly
to the upstream developers of this software.
Homepage: https://linuxcontainers.org/ https://github.com/lxc/lxc

>>> Messages generated by process 2016933 on 2026-07-16 03:05:28 -00 for package app-containers/incus-6.0.5-r1:

WARN: setup
  CONFIG_VHOST_VSOCK is required for virtual machines.
Please check to make sure these options are set correctly.
Failure to do so may cause unexpected problems.
WARN: install
Shell completion files not installed! Install them manually with incus completion --help

>>> Messages generated by process 2044063 on 2026-07-16 03:07:35 -00 for package app-containers/containers-common-0.64.2:

LOG: postinst
For rootless operations, one needs to configure subuid(5) and
subgid(5)
See /etc/sub{uid,gid} to check whether rootless user is already
configured
If not, quickly configure it with:
usermod --add-subuids 1065536-1131071 <rootless user>
usermod --add-subgids 1065536-1131071 <rootless user>
(Note: Above message is only printed the first time package is
installed. Please look at /usr/share/doc/containers-common-0.64.2/README.gentoo*
for future reference)

>>> Messages generated by process 2144116 on 2026-07-16 03:09:49 -00 for package dev-python/resolvelib-1.2.1:

QA: install
QA Notice: setuptools warnings detected:

	License classifiers are deprecated.
	`project.license` as a TOML table is deprecated

>>> Messages generated by process 2144116 on 2026-07-16 03:09:49 -00 for package dev-python/charset-normalizer-3.4.7:

QA: install
QA Notice: setuptools warnings detected:

	`project.license` as a TOML table is deprecated

>>> Messages generated by process 2144116 on 2026-07-16 03:09:49 -00 for package dev-python/uc-micro-py-2.0.0:

QA: install
QA Notice: setuptools warnings detected:

	License classifiers are deprecated.
	`project.license` as a TOML table is deprecated

>>> Messages generated by process 2144116 on 2026-07-16 03:09:50 -00 for package dev-python/distlib-0.4.0:

QA: install
QA Notice: setuptools warnings detected:

	License classifiers are deprecated.
	bdist_wheel.universal is deprecated

>>> Messages generated by process 2144116 on 2026-07-16 03:09:50 -00 for package dev-python/distro-1.9.0:

QA: install
QA Notice: setuptools warnings detected:

	License classifiers are deprecated.

>>> Messages generated by process 2144116 on 2026-07-16 03:09:51 -00 for package dev-python/certifi-3024.7.22:

QA: install
QA Notice: setuptools warnings detected:

	License classifiers are deprecated.

>>> Messages generated by process 2144116 on 2026-07-16 03:10:01 -00 for package dev-python/linkify-it-py-2.1.0:

QA: install
QA Notice: setuptools warnings detected:

	License classifiers are deprecated.
	`project.license` as a TOML table is deprecated

>>> Messages generated by process 2144116 on 2026-07-16 03:10:01 -00 for package dev-python/requests-2.33.1:

QA: install
QA Notice: setuptools warnings detected:

	'tool.setuptools.license-files' is deprecated in favor of 'project.license-files' (available on setuptools>=77.0.0).
	License classifiers are deprecated.
	`project.license` as a TOML table is deprecated

>>> Messages generated by process 2144116 on 2026-07-16 03:10:20 -00 for package dev-python/rich-15.0.0:

LOG: postinst
Install additional packages for optional runtime features:
  dev-python/ipywidgets for integration with HTML widgets for Jupyter

>>> Messages generated by process 2144116 on 2026-07-16 03:10:31 -00 for package dev-python/setuptools-79.0.1:

QA: install
QA Notice: setuptools warnings detected:

	Package 'pkg_resources.tests' is absent from the `packages` configuration.
	Package 'pkg_resources.tests.data' is absent from the `packages` configuration.
	Package 'setuptools._distutils.compilers.C.tests' is absent from the `packages` configuration.
	Package 'setuptools._distutils.tests' is absent from the `packages` configuration.
	Package 'setuptools._distutils.tests.compat' is absent from the `packages` configuration.
	Package 'setuptools.tests' is absent from the `packages` configuration.
	Package 'setuptools.tests.compat' is absent from the `packages` configuration.
	Package 'setuptools.tests.config' is absent from the `packages` configuration.
	Package 'setuptools.tests.config.downloads' is absent from the `packages` configuration.
	Package 'setuptools.tests.indexes.test_links_priority' is absent from the `packages` configuration.
	Package 'setuptools.tests.indexes.test_links_priority.simple.foobar' is absent from the `packages` configuration.
	Package 'setuptools.tests.integration' is absent from the `packages` configuration.

>>> Messages generated by process 2201193 on 2026-07-16 03:12:29 -00 for package sys-fs/zfs-kmod-2.3.6:

QA: install
QA Notice: command not found:

	./configure: line 120494: dpkg-architecture: command not found
WARN: postinst
This version of OpenZFS includes support for new feature flags
that are incompatible with previous versions. GRUB2 support for
/boot with the new feature flags is not yet available.
Do *NOT* upgrade root pools to use the new feature flags.
Any new pools will be created with the new feature flags by default
and will not be compatible with older versions of OpenZFS. To
create a new pool that is backward compatible wih GRUB2, use 
zpool create -o compatibility=grub2 ...
Refer to /usr/share/zfs/compatibility.d/grub2 for list of features.

>>> Messages generated by process 2254213 on 2026-07-16 03:14:37 -00 for package app-emulation/amazon-ssm-agent-3.3.2299.0-r1:

QA: other
QA Notice: Pre-stripped files found:
/usr/bin/amazon-ssm-agent
/usr/bin/ssm-agent-worker
/usr/bin/ssm-cli
/usr/bin/ssm-document-worker
/usr/bin/ssm-session-logger
/usr/bin/ssm-session-worker
/usr/bin/ssm-setup-cli
/usr/bin/updater

>>> Messages generated by process 2290912 on 2026-07-16 03:15:03 -00 for package app-emulation/hv-daemons-6.12.95:

QA: other
QA Notice: RESTRICT=binchecks prevented checks on these ELF files:
/usr/bin/hv_kvp_daemon
/usr/bin/hv_vss_daemon

>>> Messages generated by process 2290912 on 2026-07-16 03:15:03 -00 for package net-misc/chrony-4.8-r1:

QA: install
QA Notice: command not found:

	/build/arm64-usr/var/tmp/portage/net-misc/chrony-4.8-r1/temp/environment: line 1041: tc-tc-is-cross-compiler: command not found
WARN: postinst
Warning: tmpfiles.d not processed on ROOT != /. If you do not use
a service manager supporting tmpfiles.d, you need to run
the following command after booting (or chroot-ing with all
appropriate filesystems mounted) into the ROOT:
  tmpfiles --create
Failure to do so may result in missing runtime directories
and failures to run programs or start services.
LOG: postinst
To enable seccomp in a stricter mode, please modify:
- /build/arm64-usr/etc/conf.d/chronyd for OpenRC
- systemctl edit chronyd for systemd
to use -F 1 or -F -1 instead of -F 2 (see man chronyd)
By default, we now use -F 2 which is a baseline/minimal filter.

